Tough Dog 50mm raised rear leaf springs for the Toyota LandCruiser 76 Series (2007 onwards), sold per pair. Pick the spring rated for your constant load, then add the fitment hardware below - the shackle bush kit differs before and after 01/2017, and pre-01/2017 vehicles must fit the TDSP-014 brake bias bracket.
These are progressive-rate packs – every leaf sits in contact along its full length with the leaf above, which is what keeps the unladen ride tolerable on a working ute.
Two-stage packs carry a lighter primary stage for everyday ride quality, with heavier second-stage leaves that only come into play as the load goes on – that's what stops the rear sagging with a canopy, tools or a camper on the back. Choose the rating by the constant load the vehicle carries, counting only permanent weight.
The matching U-bolts, greasable shackles and pins, and bush kits are available from the option dropdowns on this page – if the originals have been on since new, replace them while the pack is out rather than reusing stretched U-bolts.
Doing the whole vehicle at once? We also stock the matching front Coil Springs and front Shock Absorbers for the Toyota LandCruiser 76 Series.
Match them with Tough Dog rear shocks.
| Make | Model | Series | Years |
|---|---|---|---|
| Toyota | LandCruiser | 76 Series (4.5L V8, 4.2L 6cyl, 2.8L 4cyl) | 2007 - On |
Genuine Tough Dog suspension from an authorised Australian dealer.
New to LandCruiser 76/78 Series suspension? Read our LandCruiser 76/78 Series suspension problems guide.
These suit the following applications: Toyota LandCruiser 76 Series (4.5L V8, 4.2L 6cyl, 2.8L 4cyl) 2007 - On. Check your build date and variant against the fitment table on this page – if you're not certain, contact us with your rego or VIN details and we'll confirm fitment before you order.
Pre-01/2017 vehicles use TDUK-048 (with the TDGS-387/18 shackle and TDGP-388 pins). Post-01/2017 vehicles reusing their OEM pins and shackle use TDUK-048/14. Pick the matching add-on below.
Yes if you run the BMX 45mm Adjustable or Ralph TDR rear shocks - the TDSP-015 handbrake relocation bracket must be fitted with those shocks.
The listed price covers both sides – always replace left and right together so the axle is evenly damped and sprung. It's a bolt-in job for a competent home mechanic or any workshop; check bushes, mounts and brake-line slack while everything is apart.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
