The Dobinsons MRA Adjustable Lift Kit suits the Mitsubishi Triton MQ (2015-2018) and MR (2019-on) and delivers a 2" front and rear lift using monotube remote-reservoir shocks with external damping adjustment. Vehicle-specific front coil springs and rear leaf springs work with the MRA shock absorbers to hold ride height under constant accessory loads like bull bars, winches and canopies. The kit ships complete with U-bolts, greasable shackle pins and polyurethane bushes for a full front and rear install. In stock in Australia with manufacturer warranty and fitment support from our team.
Browse all compatible suspension parts for your Mitsubishi Triton Mq-Mr using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Mitsubishi | Triton | MQ | 2015-2018 | 2.4L 4N15 diesel |
| Mitsubishi | Triton | MR | 2019-on | 2.4L 4N15 diesel |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
Choose your front coil spring rate and rear leaf spring rate based on the accessories fitted permanently to the vehicle, not just occasional loads. A bull bar, winch and driving lights add constant front weight, while a tray, canopy, dual battery tray or caravan hitch load the rear. Tell our team your typical accessory and touring load and we will help match the correct spring rate for a level, controlled ride.
Fitting this kit involves replacing front coil springs and shocks and rear leaf springs, shackles and shocks, so it suits an experienced DIY installer with a workshop hoist or a 4WD suspension fitter. A wheel alignment is mandatory once the kit is fitted, as ride height and castor angle change with the lift. Allow a 500km bedding-in period for the leaf springs and bushes to settle before fine-tuning tyre pressures and alignment. Many Triton owners pair this kit with upgraded control arms to correct front geometry and CV angles at the new ride height.
Dobinsons has designed and tested 4WD suspension in Australia for decades, and the MRA shock line reflects that local development for Australian roads and tracks. Every kit is backed by a manufacturer warranty and supported by our team's fitment knowledge on the Triton MQ-MR platform. Tourers, tradespeople and caravan owners across Australia run Dobinsons springs and shocks for daily driving and remote travel — view the full Dobinsons range to compare shock and spring options for your Triton.
This kit suits Triton MQ-MR owners running a bull bar, winch and driving lights up front, or a tray, canopy and tools in the rear, who need the ride height and spring rate matched to that gear. Tradespeople and grey nomads towing a van or box trailer benefit from the adjustable damping and correct leaf spring rate. If you're carrying variable loads rather than a constant weight, also look at airbag suspension to fine-tune rear support trip by trip.
This Dobinsons MRA kit is in stock at 4WD Suspension Australia with fast dispatch and expert fitment support from our Australian-based team. Browse our full lift kit range or check all suspension parts for the Mitsubishi Triton before you order.
Setting up a Triton? Read our guide to common Triton suspension problems and fixes.
This kit is designed for Mitsubishi Triton MQ (2015-2018) and MR (2019-on) 4WD models fitted with the 2.4L 4N15 diesel engine. It suits standard dual cab and extra cab configurations running factory front and rear suspension mounts. If your Triton has non-standard underbody accessories or a factory GLS Premium chassis brace, check with our fitment team first. Confirm your build date and variant with us before ordering so we can verify exact compatibility.
This Dobinsons MRA kit provides a 2" lift at the front and a matching 2" lift at the rear, giving a balanced stance rather than a nose-down or tail-up look. The lift comes from vehicle-specific front coil springs and rear leaf springs, not from spacers. The MRA shocks are lengthened and valved to suit this exact lift height. Actual ride height will vary slightly depending on your accessory load front and rear.
Please note that all assembled struts are dispatched at a height based on our experience and the manufacturer’s specifications for the advertised lift. Coil springs and leaf springs are also manufactured according to the advertised height and constant-load rating. Actual vehicle height may vary depending on the vehicle and the weight of fitted accessories. Further adjustment may therefore be required after installation. The installer may use coil spacers or adjust the struts at their discretion to achieve the desired height. We are not responsible for vehicle-specific height variations or any additional adjustments required after installation.
The kit includes 2 front and 2 rear Dobinsons MRA adjustable shock absorbers, 2 front coil springs and 2 rear leaf springs at the raised height, plus U-bolt kits, polyurethane bushes and greasable shackle pins for the rear leaf assembly. Fitting instructions are supplied. Upper and lower control arms are not included and are sold separately if you choose to upgrade them. Everything needed for a full front and rear spring and shock swap is in the box.
Yes. The rear leaf springs are available in different load ratings, and the MRA shocks offer external damping adjustment so you can firm up rear control when towing a van or trailer. Matching the correct leaf spring rate to your tow ball weight and constant rear accessory load is the key step. Our team can help you pick the rear spring rate based on your typical towing setup.
At a 2" lift on the Triton MQ-MR, control arm replacement isn't mandatory but it is commonly recommended. Upgraded control arms correct front camber and castor angles and improve CV joint angles at the new ride height, reducing tyre wear over time. Many owners fit them at the same time as the lift kit to get the geometry right from day one. Ask our fitment team whether your specific Triton variant needs them.
Yes, a wheel alignment is mandatory after installing this kit. Ride height, castor and camber angles all change once the new coil and leaf springs are fitted. Skipping alignment will cause uneven tyre wear and can affect steering feel and tracking. Book the alignment straight after fitment, ideally once the springs have settled slightly under the vehicle's own weight.
Dobinsons offers this MRA kit with different rear leaf spring load ratings to suit varying constant accessory loads such as canopies, trays and dual battery setups. Front coil spring rates are matched to typical bull bar and winch weights but can also be discussed with our team. Tell us your usual loaded weight front and rear and we'll confirm the correct spring rate for your Triton before you order.
A 2" lift on the Triton MQ-MR typically creates enough clearance for larger tyre sizes than factory, though exact clearance depends on wheel offset, width and any flares fitted. Most owners running this lift height fit up to 33" tyres without major rubbing, but this should be confirmed against your specific wheel and tyre combination. Our fitment team can advise on tyre sizing once they know your wheel specs.
This kit carries the Dobinsons manufacturer warranty covering the MRA shocks and springs against defects in materials and workmanship. Our team also provides Australian-based fitment support if you have questions before, during or after installation. Keep your proof of purchase and fitment date for any warranty claim. Contact us directly if you notice any issue after fitting.
Yes. The MRA shocks are externally adjustable, so you can set damping softer for unladen daily driving and firm it up when carrying gear or towing. Ride quality at 2" lift stays close to factory feel on-road when the correct spring rate is matched to your typical load. Many Triton MQ-MR owners run this kit as their everyday setup rather than a weekend-only touring rig.
Good Lift
A solid premium lift kit for the Triton MQ/MR(5)
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
