The Airbag Man Air Suspension Helper Kit transforms your Nissan Navara NP300's rear leaf spring suspension into an infinitely adjustable load-leveling system — eliminating sag when towing, hauling tools, or carrying camper gear across Australian outback tracks. Engineered specifically for the NP300 D23 platform with all cab and chassis variants, this complete easy-fit kit integrates seamlessly with your existing leaf springs to deliver on-demand load support from 0-100 PSI without compromising unladen ride quality. Backed by Airbag Man's 25+ years of Australian engineering excellence, full manufacturer warranty, and fast dispatch from local stock.
Browse all compatible suspension parts for your Air Suspension Helper Kit For Leaf using our parts finder.
| Make | Model | Series | Years | Configuration |
|---|---|---|---|---|
| Nissan | Navara | NP300 D23 | 2015-2024 | All Cab/Chassis 4x2 |
| Nissan | Navara | NP300 D23 | 2015-2024 | All Cab/Chassis 4x4 |
Important: This kit suits NP300 models with LEAF SPRING rear suspension (cab chassis variants). Dual cab models with coil spring rear suspension require different kits. Verify your suspension type before ordering.
Not sure if this fits your vehicle? Browse all suspension parts for the Nissan Navara NP300, contact our suspension experts, or check our FAQ page for fitment assistance.
Airbag pressure requirements vary based on your constant load and towing setup. Start with 20-30 PSI for light loads and incrementally increase pressure until the vehicle sits level and maintains factory ride height. For heavy constant loads (toolboxes, service bodies, water tanks), you may require 60-80 PSI, while maximum towing scenarios might need 80-100 PSI. Common accessories affecting pressure requirements include aluminium canopies and toolboxes (150-250kg), steel tray bodies and crane setups (300-500kg), water tanks and camping gear (200-400kg), plus caravan ball weight (200-350kg). Always measure your actual load and adjust pressure accordingly — running excessive pressure without load will create harsh ride quality.
This Easy Fit Kit is designed for straightforward installation by experienced DIY mechanics or professional workshops, with an estimated fitment time of approximately 120 minutes using common hand tools. The kit includes all vehicle-specific brackets and hardware required for bolt-in installation between the chassis rail and leaf spring axle, with detailed step-by-step instructions and digital guides accessible via QR code. While airbag helper kits don't typically require wheel alignment (as they don't alter suspension geometry like lift kits do), it's recommended to check alignment if you've recently installed other suspension modifications. After installation, cycle the airbags through their full pressure range several times and inspect all fittings for air leaks before loading the vehicle.
Airbag Man has been Australia's leading air suspension specialist for over 25 years, with a reputation built on engineering excellence, rigorous outback testing, and genuine customer support. Every Airbag Man kit is designed specifically for Australian vehicles and conditions — from corrugated outback tracks to coastal corrosion environments — ensuring reliable performance where imported generic kits fail. Backed by comprehensive manufacturer warranty and supported by a nationwide network of experienced installers and stockists, Airbag Man remains the trusted choice for Australian tradespeople, grey nomads, and serious tourers who demand proven load-carrying performance. Explore the complete airbag suspension range for solutions covering virtually every 4WD, van, and commercial vehicle on Australian roads.
This air suspension helper kit is ideal for Navara NP300 cab chassis owners who regularly carry heavy loads or tow caravans — including tradespeople with constant toolbox and equipment weight, mobile service operators with water tanks and generators, and touring families towing camper trailers or caravans. If you've experienced rear sag, bottoming out on corrugations, or poor handling when loaded, airbag suspension provides the most versatile and effective solution. It's also perfect for those who want to maintain factory ride comfort when empty while still having the load capacity to handle maximum GVM scenarios — the ultimate do-everything suspension upgrade for working and touring Navaras.
Ready to eliminate rear sag and transform your Navara's load-carrying capability? This complete Airbag Man kit is in stock now at 4WD Suspension Australia with fast dispatch to all Australian locations. Our suspension specialists are available to answer fitment questions and help you choose the right accessories including onboard compressors and wireless inflation systems. Order today or browse our full suspension components range to complete your Navara's suspension upgrade with quality Australian-backed products.
This kit is specifically designed for Nissan Navara NP300 D23 models from 2015-2024 with LEAF SPRING rear suspension (cab chassis configurations only). It suits both 4x2 and 4x4 cab chassis variants. If your Navara is a dual cab with coil spring rear suspension, you'll need a different Airbag Man kit designed for coil spring applications. The easiest way to confirm is to look under your vehicle — leaf springs are multi-layered metal straps, while coil springs are helical/spiral shaped. If you're unsure, contact our team with your VIN and we'll confirm the correct kit for your specific vehicle.
Airbag Man helper kits don't technically increase your vehicle's legal GVM (Gross Vehicle Mass) rating, but they do allow you to safely utilize your vehicle's existing load capacity without suspension sag or handling degradation. When inflated to appropriate pressure, the airbags can support several hundred kilograms of additional load support — typically 500-800kg combined — which is particularly beneficial for tradespeople carrying constant heavy equipment or tourers with loaded trays and caravan ball weight. The key benefit is maintaining factory ride height and suspension geometry at maximum legal load, which improves safety, handling, and component longevity. Always ensure your total vehicle weight remains within manufacturer GVM specifications.
This comprehensive Easy Fit Kit includes everything needed for installation: 2 heavy-duty airbags engineered for leaf spring applications, vehicle-specific mounting brackets and hardware, high-pressure nylon airline tubing with corrosion-resistant fittings, in-line inflation valves for easy pressure adjustment, all necessary U-bolts and fasteners, plus detailed step-by-step installation instructions with QR code access to digital guides. The only additional item you'll need is an air source for inflation — either a portable 12V compressor or access to service station air. Many Navara owners choose to add an onboard compressor system with in-cab controls for ultimate convenience, which we can recommend based on your usage requirements.
Absolutely — this is one of the primary applications for Airbag Man suspension helpers on the Navara NP300 cab chassis. The kit excels when towing caravans, camper trailers, or work trailers by maintaining correct suspension geometry and preventing rear sag that causes dangerous nose-up attitudes. When properly inflated to match your caravan's ball weight and loaded tray weight, the airbags dramatically improve towing stability, reduce body roll and porpoising, and keep headlights aimed correctly. They're equally effective for tradespeople who carry constant heavy loads in toolboxes, service bodies, or tray setups. The adjustability means you can dial in the perfect pressure for your specific load — then deflate when empty to restore factory ride comfort.
No, this airbag helper kit works with your factory suspension components and doesn't require additional upgrades for installation or normal operation. Unlike lift kits that alter suspension geometry and often necessitate upgraded control arms, these airbags simply provide additional load support to your existing leaf springs without changing suspension travel or alignment angles. However, if you're regularly operating at maximum GVM or towing heavy caravans, it's worth inspecting your shock absorbers for wear — upgraded heavy-duty shocks complement airbag systems perfectly by controlling the additional load's movement. Many Navara owners also upgrade to heavy-duty leaf springs for even greater load capacity, creating a comprehensive load-carrying suspension setup when combined with airbags.
Generally no — airbag helper kits don't alter your vehicle's suspension geometry or steering angles in the way that lift kits or modified control arms do, so wheel alignment isn't typically required after installation. The airbags install between the chassis and axle without modifying any suspension mounting points or steering components. However, if you've recently installed other suspension modifications (lift kits, different springs, extended shackles), or if your vehicle was already due for alignment, it's good practice to have alignment checked. This is particularly important if you notice uneven tire wear or steering pull. If your Navara's alignment was correct before airbag installation and you haven't modified other components, it should remain correct afterward.
Yes — infinite adjustability is the primary advantage of air suspension systems. You can adjust pressure as often as needed to match changing loads, from completely deflated when empty (0 PSI) up to maximum pressure when fully loaded or towing (up to 100 PSI). Many Navara owners adjust pressure weekly or even daily depending on their work requirements — deflating for comfortable empty driving and inflating before loading tools, towing the caravan, or heading off-road with camping gear. Adjustment takes just minutes using a portable compressor or service station air via the easily accessible inflation valves. For maximum convenience, consider an onboard compressor system with in-cab controls that allows pressure adjustment without leaving the driver's seat — particularly valuable when balancing loads or adjusting for varying terrain.
This airbag helper kit doesn't provide suspension lift or increase ground clearance — it's designed to maintain factory ride height under load rather than raise the vehicle. When deflated (empty vehicle), your Navara will sit at factory height. When inflated to support load, it returns the vehicle to factory-loaded height rather than lifting it higher. Therefore, this kit won't create additional clearance for larger tyres. If you're looking to fit larger tyres on your NP300, you'll need a proper suspension lift kit that raises both front and rear suspension, combined with appropriate wheel offset. However, the airbag kit works perfectly alongside existing lift kits if you've already installed one — providing load support at your lifted height.
Airbag Man products are backed by comprehensive manufacturer warranty covering defects in materials and workmanship, reflecting the brand's 25+ years of engineering excellence and quality construction. Specific warranty terms and duration are outlined in the documentation included with your kit and cover the airbags, fittings, and hardware components. Warranty coverage requires professional installation or competent DIY fitment following the provided instructions, and regular inspection of components as recommended in the operation manual. As an authorized Airbag Man dealer, 4WD Suspension Australia fully supports all warranty claims and can assist with any issues that arise. Keep your proof of purchase and installation records to ensure seamless warranty service if ever required.
This Airbag Man kit is absolutely suitable for daily driving and excels in both urban and loaded touring scenarios — that's precisely why it's so popular with Navara cab chassis owners. When your vehicle is empty or lightly loaded, simply deflate the airbags to 0 PSI and your Navara maintains factory ride comfort for commuting, shopping runs, and everyday driving. When you load up for work or head away for a touring trip, inflate to the appropriate pressure to eliminate sag and restore proper handling. This versatility makes airbag suspension ideal for vehicles that serve dual purposes — working hard during the week carrying tools and equipment, then transforming into comfortable touring rigs on weekends. Unlike fixed-rate heavy-duty springs that remain stiff regardless of load, airbags give you the best of both worlds with simple pressure adjustment.
Best upgrade for my work Navara
Had these airbag helpers fitted to my NP300 about six months back and they've been an absolute game changer for carting tools and materials around. The rear end doesn't sag anymore when I'm loaded up, and the ride's actually smoother than before even when empty. Installation was straightforward enough and they've handled some pretty rough tracks on site without any dramas.(5)
Perfect for Loaded Weekend Camping Trips
These airbag helpers have completely transformed how our Navara handles with the camper trailer and all the family gear loaded up. Previously we'd get a lot of sag at the rear, but now the ride stays level and controlled even on corrugated dirt roads heading to our favourite camping spots. Installation was straightforward enough for a home job, and the adjustability means we can dial it in depending on the load. Well worth the investment for anyone doing regular touring with a heavy setup.(5)