The Airbag Man Dual Rocker Air Control Kit AC3021 delivers professional-grade air management for your 4WD with a heavy-duty 200PSI compressor, 1 gallon seamless aluminium tank, and dual rocker control system for precise airbag suspension adjustment and tyre inflation. Engineered for Australian touring conditions, this complete kit features a high-output 76 LPM compressor, corrosion-resistant SAE J10 approved tank, and 7.5m tyre inflation wand with built-in gauge. Backed by Airbag Man's trusted reputation and full manufacturer warranty, with Australian stock and expert support available.
| Application | Compatibility | Notes |
|---|---|---|
| Airbag Suspension Systems | All Airbag Man airbag kits | Universal dual airbag control |
| Vehicle Fitment | Universal 4WD and commercial vehicles | Requires 12V electrical system |
| Tyre Inflation | All tyre sizes up to 200PSI | Includes 7.5m reach wand |
| Electrical Requirements | 12V DC system with 35 amp capacity | Professional wiring recommended |
Not sure if this system suits your vehicle setup? Contact our suspension experts for personalised advice or check our FAQ page for common installation questions.
The AC3021 dual rocker system is designed for vehicles running airbag suspension with regular load variation requirements. With 200PSI working pressure and 76 LPM output, this system handles rapid inflation and deflation of airbags while maintaining sufficient reserve capacity for tyre inflation duties. The 1 gallon seamless tank provides optimal balance between system response time and physical mounting size, making it ideal for utes, wagons, and SUVs where space is at a premium. Common applications include vehicles fitted with airbag suspension for towing caravans, carrying slide-on campers, trade equipment loads, or regular payload variations requiring on-the-fly adjustment.
Professional installation by a qualified auto electrician is strongly recommended to ensure correct wiring, circuit protection, and mounting security. The compressor requires adequate ventilation (336mm L x 127mm W x 222mm H clearance) with open end for cooling airflow, while the air tank's multi-position brackets allow flexible mounting locations. All air lines must be secured away from heat sources, moving components, and sharp edges with proper grommets used for body penetrations. Dual rocker switches require 20mm notched holes for dash mounting and should be positioned for easy driver access without obstructing other controls. System should be tested thoroughly before relying on it for remote area travel, and works perfectly when paired with upgraded leaf springs or coil spring airbag combinations for ultimate load carrying capability.
Airbag Man has established itself as Australia's leading airbag suspension specialist with decades of experience engineering air suspension solutions for local conditions. Every component is rigorously tested across Australian terrain from corrugated outback tracks to coastal salt environments, ensuring reliability when you're thousands of kilometres from the nearest workshop. Backed by comprehensive warranty coverage and supported by a national network of experienced dealers and installers, Airbag Man systems are trusted by touring families, grey nomads, tradespeople, and commercial operators across the country. View the full Airbag Man range to discover complementary suspension upgrades for your 4WD.
This dual rocker air control kit is perfect for 4WD owners who regularly adjust load carrying capacity, caravan towers who need to level their rig at different sites, tradespeople carrying variable tool and equipment loads, and touring enthusiasts who want independent left-right airbag control for optimal handling. The included tyre inflation wand makes it equally valuable for beach driving, remote area travel, and anyone who regularly adjusts tyre pressures for different terrain. If you're already running or planning to install airbag suspension and want professional-grade control with the added benefit of high-output tyre inflation, this system delivers exceptional value and performance in a single integrated package.
The Airbag Man AC3021 Dual Rocker Air Control Kit represents a complete air management solution for serious 4WD touring and heavy load applications. In stock now at 4WD Suspension Australia with fast dispatch to all states and territories. Our experienced suspension specialists are available to answer technical questions, provide installation advice, and recommend compatible components from our extensive range. Whether you're upgrading existing airbags or building a complete suspension system, browse our full lift kit range to find everything you need for your next 4WD suspension upgrade.
The AC3021 Dual Rocker Air Control Kit is designed as a universal system compatible with all Airbag Man airbag kits and most other brand airbag suspension systems. It provides independent control for dual airbag setups (left and right side) with separate inflate and deflate switches. The system operates on 12V DC power with 200PSI maximum working pressure, matching standard airbag specifications. If you're running a different brand of airbags or have a custom setup, our technical team can confirm compatibility and advise on any adaptor fittings that may be required.
The AC8110 heavy duty compressor delivers 76 litres per minute (2.70 CFM) at 0PSI, providing rapid inflation performance for both airbags and tyres. Typical airbag inflation from empty to 100PSI takes approximately 2-3 minutes depending on airbag volume, while the 1 gallon air tank provides instant initial pressure for quick adjustments. For tyre inflation, expect approximately 3-5 minutes per 35-inch tyre from 15PSI to 35PSI, with the 50% duty cycle allowing continuous operation with appropriate cooling breaks. The system significantly outperforms portable 12V tyre inflators and eliminates the need for manual pumping of airbags.
The complete kit includes the AC8110 heavy duty 200PSI compressor, 1 gallon seamless aluminium air tank with multi-position mounting brackets, dual rocker switch panel for dashboard mounting, 7.5 metre tyre inflation wand with built-in gauge, all necessary air lines and fittings, plus comprehensive installation instructions. The air tank features 3 x 1/4" NPT ports including a dedicated drain port for moisture management. You'll need to supply appropriate electrical wiring (rated for 35 amp draw), circuit protection, and mounting hardware suitable for your specific vehicle, though professional installers typically have these components on hand.
Absolutely - this air control system is specifically designed for towing applications where load levelling and stability are critical. The dual rocker switches allow you to independently adjust left and right airbags to compensate for uneven loads or side-to-side weight distribution when coupling a caravan or trailer. The 200PSI working pressure provides ample adjustment range for heavy towing loads, while the tyre inflation wand is invaluable for checking and adjusting tyre pressures on both your vehicle and trailer before departure. Many caravan towers consider a quality air control system like the AC3021 essential safety equipment, allowing real-time suspension adjustment at camp sites and rest stops.
This air control kit requires an existing airbag suspension system to be installed or purchased separately - the AC3021 provides the compressor, tank, and control system but does not include the airbags themselves. If you haven't yet installed airbags, you'll need to select appropriate Airbag Man airbags for your vehicle's rear axle (and front if required). Many customers combine airbag systems with upgraded leaf springs or coil springs as the foundation, then add airbags for variable load adjustment capability. The system works alongside your existing suspension components and doesn't replace shock absorbers, springs, or other chassis components - it simply provides air pressure control for your airbag suspension.
Installing the air control system itself (compressor, tank, switches, and wiring) does not affect your vehicle's wheel alignment as no suspension geometry is changed. However, if you're installing this system as part of a new airbag suspension setup, wheel alignment should be checked after the airbag installation is complete and the vehicle is at its normal loaded height. Proper alignment ensures even tyre wear and optimal handling characteristics. The ability to adjust airbag pressure means your vehicle height can change, so it's important to have alignment checked at your typical operating pressure and load configuration for the most accurate results.
While the dual rocker switches are designed for easy access and can technically be operated while driving, we strongly recommend making airbag pressure adjustments only when safely parked. Sudden pressure changes while in motion can affect vehicle handling and stability, particularly at highway speeds or in emergency manoeuvring situations. The proper approach is to assess your load, set appropriate airbag pressure before departure, and make fine adjustments at rest stops if required. The exception is minor adjustments on rough terrain at very low speeds where experienced drivers may make small pressure changes to improve ride comfort over corrugations or rocky sections.
The AC8110 compressor and included tyre wand can inflate any passenger, light truck, or 4WD tyre up to the system's 200PSI maximum working pressure, which exceeds the requirements of even the largest 4WD tyres. The 7.5 metre (25 foot) wand length provides excellent reach for dual rear wheel configurations, trailers, and caravans without needing to reposition your vehicle. The built-in high quality inflator gauge allows accurate pressure monitoring during inflation. For typical 33-35 inch 4WD tyres, expect inflation times of 3-5 minutes from beach driving pressure (15-18PSI) back to highway pressure (32-36PSI), making it ideal for touring and remote area travel where tyre pressure adjustment is frequent.
The AC3021 Dual Rocker Air Control Kit is backed by Airbag Man's comprehensive manufacturer warranty covering defects in materials and workmanship under normal use conditions. Specific warranty periods apply to different components (compressor, tank, switches, and fittings) and full warranty details are provided with your kit documentation. Warranty coverage requires professional installation following Airbag Man's specifications and appropriate maintenance including regular air tank draining and filter checks. As an authorised Airbag Man dealer, 4WD Suspension Australia provides full warranty support and can assist with any warranty claims or technical issues that may arise during the warranty period.
Yes, the AC3021 is equally suited to daily driving as it is to touring and off-road use. Urban drivers who regularly carry variable loads - such as tradespeople, delivery drivers, or families with changing cargo needs - benefit from quick airbag pressure adjustment without tools or manual pumping. The dual rocker switches provide instant control for adapting to different load conditions between morning and afternoon runs, while the onboard tyre inflation capability means you can properly inflate tyres at home rather than queuing at service stations. The system's compact design fits neatly in typical installation locations without compromising cargo space, and the 50% duty cycle compressor handles daily use demands without premature wear.
Perfect for Loading Up the Family Camper
The dual rocker air control kit has been brilliant for our monthly camping trips down the coast. Being able to adjust the air pressure from inside the cab means I can level things out when we've got the camper trailer loaded, and then drop it back down for better ride quality on the rough tracks. Installation was straightforward enough for a weekend job, and the build quality feels like it'll handle our Aussie conditions without any dramas.(5)
Perfect for Managing Load on Remote Tracks
Been running this dual rocker air control kit for six months now, covering everything from the Simpson to the Canning Stock Route. The ability to adjust air pressure on the fly makes a massive difference when you're loaded up with water, fuel and recovery gear – keeps the rig level and handles corrugations way better than my old coil setup. Installation was straightforward and the build quality has held up perfectly in the dust and heat.(5)
Perfect for Loaded Family Camping Trips
Fitted this dual rocker air control kit before our Easter trip to the High Country and what a difference it made with the van and all the camping gear loaded up. Being able to adjust the air pressure from inside the cab is so much easier than crawling around with a compressor, especially when the kids are keen to get moving. Ride quality stayed level and comfortable even on corrugated tracks, and the whole family noticed how much more stable the rig felt towing through the hills.(5)
Perfect for Daily Driving and Towing
Been running this dual rocker air control kit for six months now on my Ranger and it's made a massive difference when I'm loaded up with tools or towing the trailer. The adjustability is spot on - can fine-tune it depending on the load without mucking about. Installation was straightforward enough and the quality feels solid, which is what you want when you're using your ute for work every day.(5)
Perfect for Loading Up the Camper Trailer
Been using this dual rocker air control kit for about six months now on our monthly trips down the coast with the camper and kids' bikes loaded up. The ability to adjust the air pressure on the fly makes such a difference when we're loaded heavy versus just running around town during the week. Installation was straightforward and the ride quality when towing is noticeably better than before, especially on corrugated dirt roads heading into our favourite camping spots.(5)