The Bilstein Front Lift Kit for Mitsubishi Triton ML-MN combines legendary Bilstein B6 monotube shock technology with King Springs coils, delivering 35mm of front lift for improved ground clearance, approach angles, and fitment of larger tyres. Pre-assembled for faster installation and engineered specifically for Australian touring and towing conditions, this premium front lift kit maintains the comfort and control Bilstein is renowned for while transforming your Triton's off-road capability. Backed by full manufacturer warranty and in stock now for fast Australia-wide dispatch.
Browse all compatible suspension parts for your Front Lift Kit Suits - Mitsubishi using our parts finder.
| Make | Model | Series | Years | Body Style |
|---|---|---|---|---|
| Mitsubishi | Triton | ML | 2006-2009 | Single Cab, Extra Cab, Dual Cab |
| Mitsubishi | Triton | MN | 2009-2015 | Single Cab, Club Cab, Dual Cab |
Not sure if this fits your vehicle? Browse all suspension parts for your Mitsubishi Triton or contact our suspension experts for personalised advice. You can also check our FAQ page for common fitment questions.
Selecting the correct spring rate is critical for optimal ride quality, load-carrying capacity, and suspension longevity. Choose your spring rate based on constant load only — the weight of accessories permanently fitted to your Triton. Front constant load includes bull bars, winches, heavy-duty batteries, auxiliary lighting, long-range fuel tanks, and steel trays. Do not include occasional loads like camping gear, passengers, or recovery equipment when selecting spring rates. Choosing springs that are too heavy for your actual constant load will result in harsh ride quality, reduced articulation off-road, and accelerated wear on bushings and other suspension components.
Professional installation by a qualified suspension specialist is strongly recommended for this front lift kit. The installation process requires spring compressor tools, torque wrenches, and knowledge of safe suspension disassembly procedures. Wheel alignment is mandatory after installation to ensure correct caster, camber, and toe settings — failure to align will result in uneven tyre wear and compromised handling. A 500km break-in period is required for springs to settle and achieve final ride height. During this period, avoid extreme off-road driving and heavy loads. For vehicles with heavy front-end accessories or those seeking maximum articulation, consider pairing this kit with upgraded control arms to maintain correct suspension geometry at lifted heights.
Bilstein has been the gold standard in monotube shock absorber technology since 1873, with over 150 years of engineering excellence. The Bilstein suspension range is trusted by Australian touring enthusiasts, tradespeople, and mining operators for its bulletproof reliability in the harshest conditions. Every Bilstein shock undergoes rigorous Australian testing across desert, alpine, and tropical environments to ensure it performs flawlessly from the Kimberley to Cape York. Backed by comprehensive manufacturer warranty and supported by Australia's largest network of 4WD suspension specialists, Bilstein delivers unmatched confidence for your touring adventures.
This front lift kit is ideal for Triton ML-MN owners who have added front-end weight with bull bars, winches, or auxiliary equipment and need to restore front ride height and load capacity. It's perfect for outback tourers seeking improved ground clearance for sandy tracks, rocky trails, and creek crossings, as well as tradespeople who need reliable suspension that handles daily loads without compromise. If you regularly carry heavy loads in the tray or tow caravans, consider adding airbag suspension to the rear for adjustable load support and level towing stance.
Ready to transform your Mitsubishi Triton's capability? This Bilstein front lift kit is in stock now with fast dispatch across Australia from our expert team. Need help choosing the right spring rate or planning a complete suspension upgrade? Our suspension specialists are here to help. Browse our full lift kit range or contact us today for personalised advice on building your perfect touring setup.
This Bilstein front lift kit is specifically engineered for Mitsubishi Triton ML series (2006-2009) and MN series (2009-2015) across all body styles including Single Cab, Extra Cab, Club Cab, and Dual Cab variants. The pre-assembled shock and spring combinations are designed to match the front suspension geometry of these models perfectly. If you're unsure about your specific vehicle variant or have modified suspension components already fitted, please contact our team to confirm fitment before ordering. This kit is a front-only solution, so you may need rear suspension upgrades to achieve a level stance.
This Bilstein front lift kit provides approximately 35mm of additional front ride height compared to factory suspension on Mitsubishi Triton ML and MN models. The actual lift achieved can vary slightly (±5mm) depending on your specific spring rate selection, the weight of front accessories, and whether your vehicle's original suspension had already sagged below factory specifications. The 35mm lift provides meaningful improvements in ground clearance, approach angle, and allows fitment of 31-32" tyres without significant modifications. For greater lift heights or complete vehicle levelling, this front kit should be combined with rear suspension upgrades.
This kit includes 2 x Bilstein B6 monotube gas shock absorbers pre-assembled with 2 x King Springs front coil springs, plus all necessary mounting hardware, spring seats, isolators, and premium polyurethane bushings. The pre-assembled design means the shocks come with springs already fitted, reducing installation time and ensuring perfect component matching. This is a front-only kit, so rear suspension components, upper control arms, brake line extensions, and alignment adjustments are not included and must be sourced separately if required. All components are Australian-spec and backed by full manufacturer warranty.
Yes, this Bilstein front lift kit significantly improves towing stability and safety on your Triton ML-MN by restoring or increasing front ride height, reducing nose-dive under braking, and maintaining better weight distribution when towing. The velocity-sensitive Bilstein B6 shocks provide firmer damping during heavy braking and cornering while maintaining comfort on highway runs. However, this is a front-only kit — for optimal towing performance, you should pair it with upgraded rear suspension such as heavy-duty leaf springs or adjustable airbag suspension to level the vehicle and support tongue weight. Correct spring rate selection based on your front accessories is critical for best towing results.
For a 35mm front lift on the Triton ML-MN, upgraded control arms are not strictly mandatory but are highly recommended for optimal suspension geometry, increased wheel travel, and improved component longevity. The factory control arms will still function at this lift height, but extended-travel or adjustable upper control arms help maintain correct castor angles, reduce stress on CV joints and ball joints, and allow for better alignment settings. If you're planning to fit larger tyres (32" or above), engage in serious off-road driving, or want maximum articulation, aftermarket control arms become essential. Our team can advise on the best control arm options for your specific build and budget.
Yes, professional wheel alignment is absolutely mandatory after installing this front lift kit on your Mitsubishi Triton. Lifting the front suspension alters camber, caster, and toe settings, which will cause rapid and uneven tyre wear, poor handling, and potential safety issues if not corrected. The alignment must be performed by a workshop with 4WD experience who can adjust to lifted specifications rather than factory settings. We recommend waiting until after the 500km break-in period when springs have fully settled before performing the final alignment, though an initial rough alignment should be done immediately after installation to make the vehicle safe to drive during break-in.
Yes, this Bilstein front lift kit is available with multiple King Springs spring rate options to accommodate different constant accessory loads on your Triton ML-MN. When ordering, you'll select spring rates based on the permanent weight of front accessories like bull bars, winches, batteries, and auxiliary lights. It's critical to select springs based only on constant load — not occasional loads like camping gear, passengers, or towing equipment. Choosing springs that are too heavy for your actual constant load results in harsh ride quality, reduced articulation, and accelerated wear on bushings and suspension components. Our team can help you calculate your front-end weight and select the optimal spring rate.
This 35mm front lift kit allows most Mitsubishi Triton ML-MN models to fit 31-32" tyres (approximately 265/75R16 or 265/70R17) with minimal to no rubbing under normal driving conditions. Tyre fitment depends on several factors including wheel offset, tyre brand and tread pattern, and whether you've also lifted the rear. For 33" tyres or larger, you'll likely need additional modifications such as minor guard trimming, aftermarket upper control arms for improved clearance, and potentially diff drop brackets. Keep in mind that lifting only the front without addressing the rear will create a forward rake that reduces effective clearance under the rear diff and increases the risk of rubbing at the rear.
This Bilstein front lift kit is covered by the manufacturer's comprehensive warranty, which typically includes lifetime warranty on Bilstein B6 shock absorber bodies against defects in materials and workmanship, plus substantial warranty coverage on internal components and King Springs coils. Warranty terms apply when the kit is installed by a qualified professional, used within the manufacturer's specifications, and maintained according to guidelines. The warranty covers manufacturing defects but does not cover damage from accidents, misuse, incorrect installation, or modifications. For specific warranty duration and terms, or to register your product, please contact us after purchase — we'll provide full warranty documentation and support throughout the ownership experience.
Absolutely — this Bilstein B6 front lift kit is specifically engineered to maintain excellent ride quality and comfort for daily driving, commuting, and highway touring while dramatically improving off-road capability. Bilstein's velocity-sensitive monotube technology delivers plush, controlled damping on smooth roads and automatically firms up for corrugations and rough terrain without requiring manual adjustment. The pre-assembled King Springs are calibrated to provide comfortable on-road manners while supporting front-end accessories and preventing bottoming off-road. Thousands of Australian Triton owners run this setup as their daily driver and weekend tourer without compromise. The key is selecting the correct spring rate for your actual constant load — over-springing will result in harsh ride quality on highways.
Perfect Upgrade for My Work Triton
Been running this Bilstein front lift kit on my MN Triton for about six months now and it's been brilliant. Use the ute every day for work loaded up with tools and gear, plus weekend trips down the beach and through some light bush tracks. The ride quality is noticeably better than stock, especially when carrying a load, and the extra clearance has already saved my bumper a few times on rough job sites.(5)
Perfect Upgrade for Our Family Tourer
Fitted this Bilstein front lift kit to our MN Triton before our last trip down the coast and the difference is night and day. The ride quality on corrugated tracks is so much smoother now, and the kids aren't complaining about being bounced around in the back anymore. Really happy with how it's levelled out the front end with our bullbar and winch setup too.(5)
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
