The Bilstein Lift Kit for Volkswagen Amarok V6 Diesel combines legendary Bilstein B6 monotube gas shock absorbers with King Springs front coils and heavy-duty rear leaf springs to deliver 30mm of lift with exceptional ride quality and load-carrying capability. Engineered for the demanding Australian outback, this complete kit handles corrugations, towing, and daily driving with confidence. Backed by Bilstein's global reputation and full manufacturer warranty, this kit is in stock now with fast dispatch across Australia.
Browse all compatible suspension parts for your Volkswagen Amarok V6 Diesel using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Volkswagen | Amarok | 2H (Gen 2) | 2016-2023 | 3.0L V6 TDI Diesel |
| Volkswagen | Amarok | 2H (Gen 2) | 2016-2023 | 3.0L V6 TDI Ultimate |
Not sure if this fits your vehicle? Check our all suspension parts for the Volkswagen Amarok or contact our suspension experts for personalised advice.
Selecting the correct spring rate is critical for optimal performance and ride quality. This kit allows you to choose front and rear spring rates based on your constant load — the weight of accessories and equipment permanently fitted to your vehicle. Front accessories include bull bars, winches, driving lights, long-range fuel tanks, and heavy-duty batteries. Rear constant loads include canopies, drawer systems, dual spare wheel carriers, water tanks, and roof racks with permanent gear. Important: Occasional loads such as camping gear, passengers, or towing do not count as constant load — selecting overly heavy spring rates based on occasional use will result in a harsh ride and potential damage to other suspension components.
Professional installation by an experienced 4WD suspension specialist is strongly recommended for this kit. A full wheel alignment is mandatory after installation to ensure correct camber, caster, and toe settings, preventing premature tyre wear and maintaining safe handling characteristics. Allow a 500km break-in period for springs to settle and shocks to bed in before final ride height is achieved. For optimal suspension geometry and caster angle after lifting, consider pairing this kit with upgraded control arms to restore factory steering feel and reduce tyre scrub on full lock.
Bilstein has been the global benchmark for premium suspension performance since 1954, with their monotube gas shock technology fitted as original equipment to countless high-performance and off-road vehicles worldwide. Extensively tested across the Australian outback and backed by a comprehensive manufacturer warranty, Bilstein suspension products are trusted by touring enthusiasts, tradespeople, and professional off-road teams who demand unwavering reliability. When only the best will do, Bilstein delivers proven performance every single time.
This lift kit is ideal for VW Amarok V6 owners who regularly tow heavy caravans or trailers, carry significant payload in trays or canopies, or tour remote areas where suspension reliability is non-negotiable. Tradespeople who need maximum load capacity without sacrificing daily driving comfort will appreciate the balanced ride quality, while adventure tourers heading to Cape York, the Simpson Desert, or the High Country will benefit from the increased ground clearance and articulation. If you frequently carry maximum loads or tow at GCM, consider supplementing this kit with airbag suspension for on-demand load leveling and adjustability.
This Bilstein lift kit for Volkswagen Amarok V6 Diesel is in stock now at 4WD Suspension Australia with fast dispatch to all states and territories. Need advice on spring rates or compatibility? Our suspension experts are here to help. Ready to upgrade? Browse our full lift kit range or contact us today for personalised recommendations.
This kit is specifically engineered for the Volkswagen Amarok 2H series (2016-2023) equipped with the 3.0L V6 TDI diesel engine, including both standard and Ultimate variants. It is designed for the second-generation Amarok platform and will not fit earlier four-cylinder models. If you have aftermarket modifications or are unsure of your exact model year and variant, we recommend checking our parts finder or contacting our team to confirm fitment before ordering. Correct fitment ensures optimal performance and safety.
This kit provides approximately 30mm (1.2 inches) of lift over standard ride height when installed on a VW Amarok V6 Diesel. The actual lift height can vary slightly depending on the spring rate you select and your vehicle's constant accessory load. Heavier constant loads may result in slightly less lift, while lighter configurations may achieve marginally more. After the initial 500km break-in period, springs will settle to their final height. This modest lift provides excellent clearance for larger tyres and improved off-road capability without adversely affecting the vehicle's centre of gravity or on-road handling.
This complete kit includes 2x Bilstein B6 monotube gas front shock absorbers, 2x King Springs heavy-duty front coil springs, 2x Bilstein B6 monotube gas rear shock absorbers, 2x heavy-duty rear leaf springs, 4x U-bolts for leaf spring installation, and 1x polyurethane bush kit. All necessary hardware and fasteners for installation are provided. The kit does not include upper control arms, which are sold separately but recommended for optimal suspension geometry after lifting. You can select your preferred front and rear spring rates during the ordering process to match your vehicle's constant load requirements.
Absolutely — this kit is exceptionally well-suited for towing applications up to the Amarok's rated towing capacity of 3500kg. The Bilstein B6 shocks provide superior damping control to reduce rear squat and maintain vehicle stability under heavy towing loads, while the heavy-duty leaf springs are specifically designed to handle increased payload and tongue weight. The improved damping and spring rates significantly enhance towing safety by reducing body roll, improving braking control, and maintaining proper headlight aim under load. For maximum versatility and the ability to fine-tune ride height when towing different loads, consider adding airbag suspension as a supplement to this kit.
While not strictly mandatory for a 30mm lift, upgrading to extended or adjustable upper control arms is highly recommended for the best results. Lifting your Amarok changes the suspension geometry, particularly the caster angle, which can affect steering feel and tyre wear patterns. Upgraded control arms restore optimal geometry, improve steering return to centre, reduce tyre scrub on full lock, and enhance overall handling characteristics. Many experienced installers recommend fitting control arms at the same time as the lift kit to maximise performance and avoid needing to book the vehicle in for additional work later.
Yes, a full four-wheel alignment is absolutely mandatory after installing any lift kit, including this Bilstein kit for the Amarok V6. Lifting the vehicle alters camber, caster, and toe angles, which directly affects tyre wear, handling, and steering response. Without proper alignment, you risk premature and uneven tyre wear, poor steering feel, and potentially unsafe handling characteristics. Your installer should perform a comprehensive alignment using manufacturer specifications adjusted for the lift height. We recommend checking alignment again after the 500km break-in period once springs have fully settled.
Yes, this kit allows you to select spring rates independently for both front and rear based on your vehicle's constant accessory load. During the ordering process, you'll be prompted to select appropriate spring rates for the front (based on bull bar, winch, long-range tank weight) and rear (based on canopy, drawer systems, dual spare wheels). It's critical to select rates based only on permanently fitted accessories — not occasional loads like camping gear or towing, as these are temporary. Selecting overly heavy spring rates will result in a harsh ride and potential stress on other suspension components, while too-soft rates will cause excessive sag and poor handling.
The 30mm lift provided by this Bilstein kit will generally allow fitment of tyres up to 32 inches in diameter (approximately 275/65R18 or 265/70R17) without significant modification, depending on your wheel offset and whether you've fitted wider aftermarket wheels. Some minor trimming of plastic inner guards may be required for full articulation without rubbing. If you're planning to fit tyres larger than 32 inches, additional modifications such as guard trimming, aftermarket flares, or further lifting may be necessary. We recommend consulting with your installer about your specific tyre and wheel combination before purchasing to ensure clearance for your intended setup.
This kit is backed by Bilstein's comprehensive manufacturer warranty, which covers the B6 shock absorbers against defects in materials and workmanship under normal use. King Springs front coils are also covered by the manufacturer's warranty against sagging and breakage. Warranty terms vary by component and usage, so it's important to retain your proof of purchase and have the kit installed by a qualified professional to maintain warranty validity. We recommend reviewing the specific warranty documentation included with your kit, and our team is always available to assist with any warranty queries or claims should issues arise.
Yes, this kit is absolutely suitable for daily driving, commuting, and highway touring — in fact, that's where Bilstein's engineering excellence really shines. Unlike budget lift kits that sacrifice on-road comfort for off-road capability, the Bilstein B6 monotube shocks maintain excellent highway manners with controlled damping that reduces body roll and improves steering response. The progressive-rate King Springs front coils provide a comfortable ride when lightly loaded while firming up progressively under load. Many Amarok owners report improved ride quality compared to worn factory suspension, particularly when the kit is correctly matched to their vehicle's constant load. This kit strikes an excellent balance between off-road capability, load-carrying performance, and everyday comfort.
Proper lift kit that handles the tools
Had this Bilstein kit fitted to my Amarok about three months back and it's been spot on for daily work use plus weekend trips down to the coast. The 30mm lift gives heaps better clearance on building sites without making it ride like a shopping trolley, and the King Springs up front handle the toolboxes and materials no worries. Worth every cent if you're actually using your ute for work.(5)
Solid Kit for Serious Remote Travel
Been running this Bilstein 30mm lift kit on my Amarok V6 for six months now, including a full Cape York trip and multiple Simpson crossings. The ride quality is noticeably better than stock even when loaded with camping gear and water, and the extra clearance has already saved my diff twice on gnarly ruts. King Springs paired with the Bilstein shocks handle corrugations brilliantly without that harsh jarring you get with budget setups. Worth every cent if you're doing proper remote work.(5)
Perfect Upgrade for Our Family Camping Rig
Been running this Bilstein lift kit on our Amarok for six months now and it's transformed the way the ute handles both on the blacktop and at our favourite spots along the High Country. The ride quality is noticeably smoother than stock, especially when we're loaded up with the camper trailer and all the kids' gear. Installation was straightforward and everything lined up perfectly – well worth the investment for anyone serious about their weekend touring.(5)
Perfect Setup for Work and Weekends
Had this Bilstein lift kit fitted to my Amarok a few months back and it's been ripper. Carries all my tools and gear during the week without sagging, and the ride quality is actually better than stock even when it's loaded up. Took it down some rough tracks on the weekend and the extra clearance made a noticeable difference getting through the ruts.(5)
Proper Kit for Serious Outback Work
Been running this Bilstein lift kit on my Amarok for six months now, including a recent Cape York trip and multiple Simpson crossings. The 30mm lift gives perfect clearance without compromising on-road manners, and the Bilstein shocks handle corrugations far better than the factory setup ever did. Worth every cent if you're serious about getting remote - the King Springs hold up well under load and the whole package feels properly engineered rather than just chucked together.(5)
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
