Dobinsons front coil springs for the Isuzu MU-X 2013-06/2021 are wound in Australia and supplied in multiple rates so the spring matches the load actually carried on the front of the vehicle. Choose your lift height and load rating below — the genuine Dobinsons part number is shown against every option. Sold as a matched pair at Dobinsons RRP, in stock in Australia with fitment support from our team.
Browse all compatible suspension parts for your Isuzu MU-X 2013-06/2021 using our parts finder.
These springs are the core of a 2 inch or 3 inch lift kit for the MU-X 2013-06/2021 — pair them with the matching dampers so the ride height and damping work together: Dobinsons rear coil springs for the MU-X 2013-06/2021; Dobinsons Nitro Gas front shocks for the MU-X 2013-06/2021; Dobinsons Nitro Gas rear shocks for the MU-X 2013-06/2021; Dobinsons IMS rear shocks for the MU-X 2013-06/2021. Every part is load-rated, pair-priced at Dobinsons RRP and dispatched from Australian stock.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Isuzu | MU-X | UCR85 / UCS85 | 2013 - 06/2021 | 3.0L 4JJ1 Turbo Diesel |
Note: The MU-X uses a coil-sprung rear axle, unlike the leaf-sprung D-Max ute. This listing suits the 2013 to 06/2021 MU-X.
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
| Lift | Part Number | Constant Load |
|---|---|---|
| 1" Lift | C59-134 | No Accessories |
| 2" Lift | C59-296 | No Accessories |
| 2" Lift | C59-300 | 50-100Kg |
| 1" Lift | C59-276 | No Accessories |
| 2" Lift | C59-134 | No Accessories |
Front coil springs are a bolt-in job for an experienced DIY installer or any suspension workshop. A spring compressor is required to dismantle the front strut assembly, and a wheel alignment is mandatory afterwards because ride height changes camber and caster. Allow around 500km for new springs to settle. Springs only — shocks are sold separately.
Dobinsons has been designing and manufacturing 4WD suspension in Australia for decades, with springs wound and dampers valved for local loads, corrugations and touring distances rather than adapted from an overseas market spec. Every part is backed by a Dobinsons manufacturer warranty. View the full Dobinsons range to match the rest of your build.
Isuzu MU-X 2013-06/2021 owners restoring sagged ride height or fitting accessories that add constant weight. Pair with matched Dobinsons dampers valved for the lift height you choose.
New to MU-X suspension? Read our guide to common MU-X suspension problems and how to fix them.
Yes — these Dobinsons front coil springs are made for the Isuzu MU-X 2013-06/2021 and use the factory spring mounts, so no cutting or drilling is required. The MU-X uses a coil-sprung rear axle, unlike the leaf-sprung D-Max ute. This listing suits the 2013 to 06/2021 MU-X.
Lift depends on the option selected and is shown in the dropdown and the options table. Actual height also depends on your current spring sag and the weight permanently carried, so a spring rated for a heavier load will sit higher on an unladen vehicle and settle once accessories are fitted.
Match the rating to weight that is on the vehicle permanently rather than occasionally. Too soft and the vehicle sags with accessories fitted; too firm and it rides harshly unladen. Our team can confirm the right option against your build before you order.
A matched pair (2 x) of Dobinsons coil springs in the option you select, with the exact part number shown in the dropdown. Shocks, struts and other components are sold separately.
Yes. Choose the 2" lift option on this page and pair it with the matching Dobinsons dampers linked above — springs set the lift height and load rating, and the matched shocks control it. The same approach with 3" options builds a 3 inch lift kit for the MU-X 2013-06/2021.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
