The Dobinsons IMS Quick-Lift Adjustable Lift Kit for Mitsubishi Triton ML-MN delivers next-level monotube shock absorber performance designed for harsh Australian outback conditions. Engineered to resist fade on corrugated roads, towing, and demanding 4WD trips, this complete lift kit includes pre-assembled front struts with heavy-duty coil springs, rear monotube shocks, and extended shackles. Backed by hundreds of hours of Australian testing and tuning, this kit balances comfort, handling, and off-road capability with Fuchs oil, composite piston wear bands, and race-style sealing. Australian stock with full warranty and expert support.
Browse all compatible suspension parts for your Quick-Lift Adjustable Lift Kit Suits - using our parts finder.
| Make | Model | Series | Years | Body |
|---|---|---|---|---|
| Mitsubishi | Triton | ML | 2006-2009 | Single Cab, Dual Cab |
| Mitsubishi | Triton | MN | 2009-2015 | Single Cab, Dual Cab |
Not sure if this fits your vehicle? Contact our suspension experts or browse all suspension parts for the Mitsubishi Triton using our parts finder.
Selecting the correct spring rate is critical for optimal ride quality, load support, and component longevity. This kit allows you to choose front and rear spring rates based on your current constant accessory load — the weight permanently fitted to your vehicle. Do not select spring rates for occasional loads or towing, as over-springing results in harsh ride quality and can damage suspension components through excessive stress. Common constant front loads include steel bullbars, winches, upgraded steel bumpers, and heavy-duty batteries. Rear constant loads include steel canopies, aluminium trays, dual battery systems, long-range fuel tanks, rear bars, and permanent drawer systems. Occasional loads such as camping gear, passengers, or towing a caravan should not be factored into spring rate selection — consider adding airbag suspension to handle variable loads without compromising unladen ride quality.
Professional installation by a qualified 4WD suspension specialist is strongly recommended for this lift kit to ensure correct fitment, torque specifications, and safety compliance. Experienced DIY installers with appropriate tools, jack stands, and workshop facilities may undertake installation following Dobinsons guidelines. Wheel alignment is mandatory after installation to prevent premature tyre wear and ensure proper steering geometry. A 500km break-in period is required to allow springs to settle and shock absorbers to bed in — re-check all fastener torques after this period. Depending on lift height and vehicle use, consider pairing this kit with upgraded control arms to maintain optimal suspension geometry and extend component lifespan.
Dobinsons has been engineering world-class 4WD suspension for over 60 years, with extensive real-world testing across Australia's harshest outback terrain, Cape York tracks, Simpson Desert dunes, and Gibb River Road corrugations. Every Dobinsons kit is backed by comprehensive manufacturer warranty and supported by a national network of dealers and fitment centres. Trusted by recreational tourers, professional tradespeople, mining contractors, and 4WD enthusiasts across Australia, Dobinsons represents proven performance and reliability. Explore the complete Dobinsons suspension range for complementary steering dampers, airbags, and accessories.
This IMS Quick-Lift kit is ideal for Mitsubishi Triton ML-MN owners who demand premium monotube performance for serious touring, remote area travel, or heavy-duty commercial use. Whether you're a tradesperson carrying constant work equipment, a touring family with permanent accessories, or a weekend warrior tackling challenging off-road terrain, this kit delivers the adjustability and durability required. For drivers carrying highly variable loads or regularly towing heavy caravans, pair this lift kit with supplementary airbag suspension for on-demand load support without compromising unladen ride comfort.
Ready to transform your Mitsubishi Triton's capability and comfort? This Dobinsons IMS Quick-Lift kit is in stock now with fast dispatch across Australia, backed by expert technical support and comprehensive warranty. Need help selecting spring rates or complementary components? Our suspension specialists are ready to assist. Browse our full range of lift kits or contact us today to upgrade your 4WD suspension with confidence.
Yes, this kit is specifically engineered for Mitsubishi Triton ML series (2006-2009) and MN series (2009-2015) models, covering both single cab and dual cab body styles. The kit includes vehicle-specific mounting hardware and correctly valved shock absorbers for your Triton's weight and suspension geometry. If you're unsure about your exact series or have modified suspension components, contact our team to confirm fitment before ordering. You can also use our parts finder tool to verify compatibility with your specific year and variant.
The Dobinsons IMS Quick-Lift kit provides adjustable lift height depending on spring rate selection and current vehicle load, typically ranging from 30mm to 50mm front and rear lift. The Quick-Lift design allows fine-tuning of ride height to accommodate different accessory loads and maintain level stance. Final lift height varies based on your selected spring rates, constant accessory weight (bullbar, canopy, etc.), and the condition of other suspension components. The extended rear shackles contribute additional lift while maintaining proper suspension geometry and axle articulation for improved off-road performance.
This kit includes 2 x Dobinsons IMS monotube front struts pre-assembled with heavy-duty coil springs, 2 x Dobinsons IMS monotube rear shock absorbers, 2 x extended rear shackles, and all necessary mounting hardware and fasteners. The front struts arrive fully assembled for faster installation and guaranteed spring-to-shock compatibility. You'll also receive Dobinsons installation guide, spring rate selection chart, and full warranty documentation. Note that some complementary upgrades such as upper control arms, extended brake lines, or diff drop brackets are sold separately and may be recommended depending on your lift height and intended use.
Absolutely — the IMS monotube design is specifically engineered for towing applications where sustained heat build-up can cause twin-tube shocks to fade. The monotube construction provides superior heat dissipation and consistent damping performance even during extended highway towing or corrugated road travel with heavy loads. When ordering, select spring rates based on your constant accessory load only (not towing weight), and consider adding airbag suspension for on-demand load support when hitching up your caravan. This combination delivers excellent towing stability while maintaining comfortable unladen ride quality for daily driving.
Control arm upgrades are not mandatory for this lift kit but are highly recommended to maintain optimal suspension geometry, extend ball joint and bushing lifespan, and improve handling characteristics. The 30-50mm lift provided by this kit may alter castor and camber angles, which upgraded control arms can correct while providing additional strength and ground clearance. If you frequently tackle challenging off-road terrain, carry heavy loads, or want maximum component longevity, pairing this lift with quality control arms is a worthwhile investment. Our team can recommend compatible control arm options specific to your Triton ML-MN and intended use.
Yes, professional four-wheel alignment is mandatory after installing any lift kit to ensure correct steering geometry, prevent premature tyre wear, and maintain safe handling characteristics. The lift alters your Triton's castor, camber, and toe angles, which must be adjusted to manufacturer specifications or optimized settings for your new ride height and intended use. Book your alignment with a 4WD suspension specialist who understands lifted vehicle geometry requirements. Re-check alignment after the 500km break-in period once springs have fully settled, and inspect it regularly as part of your maintenance schedule, especially after off-road trips.
Yes, this kit allows independent front and rear spring rate selection to perfectly match your specific constant accessory load configuration. During ordering, you'll select spring rates based on the permanent weight you carry — front rates for bullbars, winches, and upgraded bumpers; rear rates for canopies, trays, drawer systems, and long-range tanks. It's critical to select rates based only on constant load, not occasional loads or towing capacity. Over-springing by selecting unnecessarily heavy rates results in harsh ride quality and can damage suspension components through excessive stress. If you need assistance calculating your constant load, our suspension experts can guide you through the selection process.
Yes, the 30-50mm lift provided by this kit typically allows fitment of tyres up to 265/75R16 or 265/70R17 (approximately 31-32 inches) on standard wheel offset without significant modifications. Exact tyre clearance depends on your wheel offset, tyre brand (different manufacturers vary in actual dimensions), and suspension compression under load. Some minor trimming of plastic guards or mudflaps may be required for full articulation clearance on certain tyre sizes. For larger tyres or aggressive off-road use, consider additional modifications such as guard trimming, diff breather extensions, or aftermarket guard flares. Always test full suspension articulation and steering lock before heading off-road.
This Dobinsons IMS Quick-Lift kit is backed by comprehensive manufacturer warranty covering materials and workmanship defects under normal use conditions. Dobinsons is renowned for standing behind their products with responsive warranty support through their national dealer network. Warranty validity requires professional installation, correct spring rate selection based on actual constant load, adherence to break-in procedures, and regular maintenance including inspection of mounting hardware and shock absorber seals. Keep your proof of purchase and installation records for warranty claims. Contact our team for specific warranty terms and conditions or if you experience any issues with your kit.
Absolutely — Dobinsons engineers spend hundreds of hours tuning the shim stacks and damping characteristics to balance off-road capability with excellent on-road comfort and handling. The IMS monotube design delivers superior ride quality compared to budget twin-tube shocks, with reduced harshness over bumps, improved high-speed stability, and minimal body roll during cornering. Many owners report improved highway comfort compared to worn factory suspension, especially when towing or carrying loads. The adjustable design allows fine-tuning ride height for optimal aerodynamics and comfort. Whether you're commuting daily or touring thousands of kilometres across Australia, this kit delivers the comfort and reliability required for long-distance highway travel.
Perfect for Daily Work and Weekend Trips
Been running this Dobinsons quick-lift kit on my ML Triton for about 6 months now and it's been brilliant. Handles the loaded tray during the week without any dramas, and still rides smooth enough for the daily commute. The adjustability is a proper game-changer when I throw the camper on for weekend trips up the High Country.(5)
Perfect Upgrade for Our Family Triton
Fitted this Dobinsons adjustable lift kit to our MN Triton before our last trip down to Wilsons Prom and the difference is night and day. The ride quality is so much better loaded up with all the camping gear and the kids in the back, and we've got plenty of clearance now for beach tracks. Really impressed with how well everything fitted together, made the install pretty straightforward on the weekend.(5)
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
