Dobinsons Nitro Gas 2 Inch Front Lift Kit for Nissan Navara D40 (2005-2015)

This Dobinsons front lift kit provides a genuine 2 inch (50mm) lift at the front axle when measured from standard ride height with no accessories fitted. Actual installed height will vary based on your constant accessory load (bullbar, winch, etc.) and selected spring rate — heavier accessories may compress springs slightly reducing final lift height. The Nitro Gas twin-tube struts are specifically valved for the D40 platform to deliver improved ride comfort over factory shocks, with firmer control under load and reduced body roll, while maintaining comfortable daily driving characteristics. Expect a slightly firmer ride than stock when unladen, with significant improvements in handling, stability, and control when loaded or towing.

This complete front lift kit includes 2 x Dobinsons Nitro Gas pre-assembled front struts (35mm bore, twin-tube design), 2 x Dobinsons raised front coil springs rated for 2" lift, 2 x Dobinsons strut top mounts, and all necessary mounting hardware and installation components. The pre-assembled design means coil springs are already installed and compressed on the strut bodies, significantly reducing installation time and eliminating the need for dangerous spring compressor tools. Please note this kit covers the front axle only — rear suspension components including shocks and springs are sold separately and can be selected based on your tray configuration and load requirements.

Yes, this Dobinsons front lift kit significantly improves towing capability and stability when paired with appropriate rear suspension upgrades such as heavy-duty rear shocks, progressive springs, or airbag suspension. The firmer spring rates and enhanced damping reduce front-end dive and squat when towing heavy loads, improving steering control and braking performance. For optimal towing setup on the D40, we recommend selecting medium to heavy spring rates on the front based on your permanent accessories (bullbar, winch), and upgrading to heavy-duty rear suspension or airbags to manage towball weight and maintain level ride height. This balanced approach delivers safe, stable towing performance for caravans up to 3,000kg ATM while maintaining comfortable unladen ride quality.

While not strictly mandatory, we strongly recommend upgrading to extended upper control arms when lifting your Navara D40 by 2 inches or more. Lifting the front suspension changes the angle of the upper ball joints and control arm geometry, which can cause increased wear on CV axles, premature ball joint failure, and reduced suspension travel. Aftermarket extended upper control arms (sold separately) restore factory geometry, correct ball joint angles, provide additional clearance for larger tyres, and often include upgraded bushings for improved durability. This investment protects your new lift kit and ensures maximum performance, tyre clearance, and component longevity — particularly important for heavy touring or off-road use.

Yes, professional four-wheel alignment is absolutely mandatory after installing any lift kit, including this Dobinsons front strut kit. Lifting your vehicle alters suspension geometry and changes camber, caster, and toe angles beyond factory specifications, which will cause rapid and uneven tyre wear, reduced handling performance, and potentially unsafe driving characteristics if not corrected. A qualified suspension shop with modern alignment equipment will adjust all settings back to manufacturer specifications (or improved performance specs for lifted applications) to ensure even tyre wear, predictable steering response, and maximum safety. Budget $150-250 for professional alignment — it's essential maintenance, not optional, and will save you thousands in premature tyre replacement.

When ordering this kit, you'll be prompted to select your preferred front spring rate based on your vehicle's constant accessory load — this is the permanent weight fitted to your Navara, not occasional cargo. Light spring rates suit vehicles with minimal accessories (plastic bullbar or no bullbar, no winch), medium rates suit most common setups (steel bullbar 30-50kg, winch 30-40kg, upgraded battery), and heavy rates suit fully-equipped rigs with heavy steel bumpers, large winches, dual batteries, and other front-mounted accessories. To calculate your load, add up the weight of all permanently fitted front accessories and select accordingly. Choosing a spring rate that's too heavy for your actual load will result in harsh, uncomfortable ride quality and potential damage to bushings and mounts — always select based on your real constant load, not aspirational future additions.

With this Dobinsons 2" front lift kit installed, most Navara D40 owners can comfortably fit tyres up to 32" diameter (265/75R16 or 285/70R17) without rubbing under normal driving conditions, depending on wheel offset and backspacing. Some fitments may achieve 33" tyres (285/75R16) with minor trimming of plastic liner or with the addition of extended upper control arms and wheel spacers to improve clearance. Final tyre clearance depends on multiple factors including wheel offset, backspacing, tyre brand and actual measured diameter, suspension droop and compression travel, and whether you've fitted aftermarket control arms. For maximum tyre clearance and articulation, we recommend pairing this front lift with extended upper control arms, checking clearance at full lock and full compression, and test-fitting before committing to larger aggressive tread patterns.

This Dobinsons Nitro Gas Front Lift Kit is backed by Dobinsons' comprehensive manufacturer warranty covering defects in materials and workmanship, giving you peace of mind when investing in premium Australian-engineered suspension. Warranty terms typically cover shock absorbers and struts for a specified period from date of purchase (usually 12-24 months depending on application), while coil springs are covered under separate warranty terms. Warranty coverage requires professional installation or documented DIY installation following Dobinsons' specifications, proof of purchase, and normal operating conditions (warranty excludes racing, extreme competition use, or modified applications beyond design parameters). Contact us for full warranty documentation and terms, and register your product after installation to ensure your coverage is activated.

Absolutely — this Dobinsons Nitro Gas lift kit is engineered to deliver excellent on-road comfort and handling for daily driving, highway cruising, and long-distance touring, while dramatically improving off-road capability when you need it. The twin-tube design with vehicle-specific valving provides a balanced ride that's firmer and more controlled than worn factory suspension, but far more comfortable than budget monotube or foam cell shocks not properly tuned for the D40 platform. Natural rubber bushings reduce noise and vibration, while the larger body diameter and quality Fuchs oil prevent shock fade during extended highway driving in hot conditions. Thousands of Navara D40 owners across Australia use this exact kit as their daily driver suspension setup, enjoying improved ride quality, better load handling, and the confidence of Australian-tested components whether commuting to work or heading outback on weekends.