The Dobinsons Nitro Gas Lift Kit for Toyota Fortuner combines Australian-engineered twin-tube gas shocks with raised front and rear coil springs to deliver superior ride quality, improved load handling, and enhanced off-road performance. Featuring larger bore sizes, premium Fuchs oil, and Japanese NOK multi-lip seals, this complete lift kit is designed and tested in Australia's harshest conditions. In stock now with fast Australia-wide dispatch and full manufacturer warranty.
Browse all compatible suspension parts for your Toyota Fortuner using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Toyota | Fortuner | GUN156R | 2015-ON | 2.8L Diesel |
| Toyota | Fortuner | GGN60R | 2015-ON | 4.0L V6 Petrol |
Not sure if this fits your vehicle? Browse all suspension parts for the Toyota Fortuner or contact our suspension experts for personalized fitment advice.
Selecting the correct spring rate is critical for optimal ride quality and vehicle safety. Dobinsons offers multiple spring rates based on your constant accessory load — this means the weight you carry every day, not occasional loads. Common front accessories include bull bars, winches, driving lights, upgraded batteries, and long-range fuel tanks. Rear constant loads include drawer systems, dual battery setups, canopies, roof racks with permanent storage, water tanks, and second spare tyres. Occasional loads like camping gear, passengers, and towing are not considered constant loads. Selecting too heavy a spring rate will result in harsh ride quality and potential damage to other suspension components, while too soft a rate will cause sagging and poor handling.
Professional installation by a qualified 4WD mechanic is strongly recommended for this lift kit to ensure correct fitment, torque specifications, and safety. A full four-wheel alignment is mandatory after installation to prevent premature tyre wear and ensure proper steering geometry. Dobinsons recommends a 500km break-in period where springs will settle and shocks will bed in — avoid extreme off-road use during this period. Depending on your lift height and vehicle use, you may need to pair this kit with upgraded control arms or extended brake lines to maintain factory ride quality and safety standards. Our team can advise on complementary upgrades during your purchase.
Dobinsons Spring & Suspension has been manufacturing premium Australian suspension components for over 60 years, with products exported to more than 40 countries worldwide. Every Dobinsons shock absorber is designed by in-house suspension engineers, dyno-tested for valve force accuracy, and subjected to extreme durability testing that simulates millions of cycles in temperatures exceeding 100°C. Manufactured to TS16949 International Quality Assurance Systems with robotic welding, CNC-machined components, and drop-forged mounting hardware, Dobinsons products are trusted by Australian tourers, tradespeople, and off-road enthusiasts. Explore the complete Dobinsons suspension range for compatible upgrades and accessories.
This Nitro Gas Lift Kit is ideal for Toyota Fortuner owners who need a balance of on-road comfort and off-road capability — perfect for weekend tourers, grey nomads towing caravans, tradespeople carrying tools and equipment, and families heading off the bitumen for camping and adventure. If you regularly carry heavy rear loads or tow near your vehicle's capacity, consider pairing this kit with airbag suspension for adjustable load support and level vehicle stance. The raised coil springs provide additional clearance for larger tyres and improved approach angles, while the gas shocks deliver controlled damping under load and high-speed corrugations.
All Dobinsons Nitro Gas Lift Kits are in stock at our Australian warehouse with fast dispatch to all states and territories. Our suspension experts are available to help you choose the right spring rates, answer fitment questions, and recommend complementary upgrades. Order today with confidence backed by manufacturer warranty and decades of proven Australian engineering. Ready to upgrade your 4WD? Browse our full range of lift kits for all makes and models.
This kit is designed to fit Toyota Fortuner GUN156R (2.8L Diesel) and GGN60R (4.0L V6 Petrol) models from 2015 onwards. It's a direct bolt-in replacement using factory mounting points with no chassis modifications required. If you have a modified vehicle or aftermarket accessories like bull bars or winches, we recommend contacting our team to confirm fitment and discuss any complementary upgrades. You can also check our parts finder for your specific Fortuner variant to see all compatible suspension options.
The Dobinsons Nitro Gas Lift Kit provides approximately 40-50mm of lift at the front and rear, depending on your current accessory load and selected spring rate. The actual lift height will vary based on constant weight (bull bars, winches, drawers, canopies) and will settle slightly during the first 500km break-in period. This lift height improves ground clearance, approach and departure angles, and allows fitment of slightly larger tyres. For exact lift measurements based on your specific setup, our suspension experts can provide personalized advice during your order.
This complete kit includes 2 x Dobinsons Nitro Gas front struts, 2 x raised front coil springs, 2 x Dobinsons Nitro Gas rear shock absorbers, and 2 x raised rear coil springs. The shocks come with natural rubber bushings and steel dust covers where applicable. The kit does not include upper control arms, extended brake lines, diff drop kits, or installation hardware — these may be required depending on your lift height and vehicle configuration. Our team can recommend any additional components needed for your specific Fortuner setup.
Yes, this Dobinsons Nitro Gas Lift Kit is excellent for towing applications thanks to its vehicle-specific valving, larger shock body sizes, and increased oil capacity that reduces shock fade under load. The raised coil springs provide improved load-carrying capacity compared to factory springs, maintaining ride height when towing. For regular heavy towing or caravan use, we recommend selecting a heavier rear spring rate based on your towball weight, and consider adding airbag suspension for adjustable load support and level towing stance. The premium gas shocks deliver controlled damping to reduce sway and improve stability when towing on highways and corrugated roads.
Upper control arms are not typically required for the 40-50mm lift provided by this kit, but they may be beneficial depending on your Fortuner's existing wear, alignment requirements, and intended use. Upgraded control arms can improve caster angle, correct ball joint geometry, and provide additional clearance for larger tyres. If your vehicle has high kilometres or existing suspension wear, replacing control arms during lift kit installation is a cost-effective approach. Our suspension specialists can assess your specific vehicle and recommend whether control arm upgrades would benefit your setup during the ordering process.
Yes, a full four-wheel alignment is absolutely mandatory after installing any lift kit on your Toyota Fortuner. Changing ride height alters your vehicle's steering geometry, camber, caster, and toe settings — driving without proper alignment will cause rapid and uneven tyre wear, poor handling, and potential safety issues. The alignment must be performed by a qualified workshop with 4WD experience using manufacturer specifications adjusted for your new ride height. This is not optional and should be factored into your total installation cost when budgeting for your lift kit upgrade.
Yes, Dobinsons offers multiple spring rates to match your specific constant accessory load, and you select front and rear rates independently based on the weight you carry in each location. During checkout, you'll specify your constant front load (bull bar, winch, long-range tank) and constant rear load (drawers, canopy, dual battery, second spare). It's critical to select only genuine constant loads — occasional camping gear, passengers, and towing weight should not be factored into spring rate selection. Choosing too heavy a spring rate will result in harsh ride quality and potential damage to other suspension components, while too light will cause sagging and poor handling.
With the 40-50mm lift provided by this kit, most Toyota Fortuner owners can fit tyres up to 265/70R17 or 265/65R18 (depending on wheel size) without rubbing under normal driving conditions. Larger tyres may require minor trimming of plastic guards or mudflaps, particularly at full steering lock or under compression during off-road use. Tyre fitment also depends on your wheel offset and whether you're running spacers. For specific tyre size recommendations based on your wheel setup and intended use, contact our team who can provide detailed fitment advice. Remember that larger tyres will affect speedometer accuracy and may require recalibration.
This Dobinsons Nitro Gas Lift Kit is backed by Dobinsons' full manufacturer warranty covering defects in materials and workmanship. As an authorized Dobinsons dealer, we provide full warranty support with direct access to Dobinsons Australia for any claims or technical support. The warranty requires professional installation and proper maintenance including regular inspections of shock mounts, bushings, and hardware. Warranty does not cover damage from accidents, incorrect installation, modified components, or use beyond the product's intended design parameters. Keep your invoice and installation records for warranty purposes.
Absolutely — this Nitro Gas Lift Kit is engineered to provide excellent on-road comfort and highway manners while still delivering capable off-road performance when needed. The twin-tube gas design with vehicle-specific valving maintains composed handling during daily commuting, highway cruising, and towing, while the natural rubber bushings reduce noise and vibration compared to polyurethane alternatives. The premium Fuchs oil and NOK seals ensure consistent damping performance across all temperatures and conditions. Many Fortuner owners choose this kit specifically because it doesn't compromise daily driving comfort for off-road capability — it's the ideal balance for vehicles that spend 80% of their time on sealed roads.
Solid upgrade for daily work duties
Been running this Dobinsons lift kit on my Fortuner for about six months now, carting tools and materials around job sites and the odd weekend trip down the coast. The ride quality is miles better than stock, especially with a loaded tray, and it handles the corrugated dirt tracks on site without rattling my teeth out. Worth every cent for something that's actually engineered here and built to last in Aussie conditions.(5)
Proper Setup for Serious Remote Touring
After 12,000km through the Simpson, Canning Stock Route, and Cape York, this Dobinsons lift kit has proven itself where it counts. The twin-tube gas shocks handle corrugations far better than the factory setup ever did, and I'm running a fully loaded Fortuner with long-range tanks, drawer system, and rooftop tent without any sag. Build quality is typical Dobinsons – Australian-designed gear that's built to cop a hiding and keep performing.(5)
Perfect Upgrade for Our Family Adventures
Fitted this Dobinsons lift kit to our Fortuner about six months ago and it's been brilliant for our monthly camping trips down the coast and out to the high country. The ride quality is noticeably better than stock, especially when we're loaded up with the kids, camping gear, and the roof-top tent. Really impressed with how well it handles corrugated dirt roads now without jarring everyone around in the cabin.(5)
Perfect Upgrade for Our Outback Touring
Had the Dobinsons Nitro Gas Lift Kit fitted to our Fortuner before our last Cape York trip and the difference is night and day. The ride quality on corrugations is miles better than stock, and it handled the weight of our rooftop tent and extra gear without any dramas. Installation was straightforward and everything lined up perfectly - you can tell it's been properly engineered for our conditions.(5)
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
