Reviewed by Andrew, 4WD Suspension fitment team
Dobinsons rear coil springs for the GWM Tank 300 2023-On are wound in Australia and supplied in multiple rates so the spring matches the load actually carried on the rear of the vehicle. Choose your lift height and load rating below — the genuine Dobinsons part number is shown against every option. Sold as a matched pair at Dobinsons RRP, in stock in Australia with fitment support from our team.
Browse all compatible suspension parts for your GWM Tank 300 2023-On using our parts finder.
These springs are the core of a 2 inch or 3 inch lift kit for the Tank 300 2023-On — pair them with the matching dampers so the ride height and damping work together: Dobinsons front coil springs for the Tank 300 2023-On; Dobinsons IMS rear shocks for the Tank 300 2023-On; Dobinsons IMS front shocks for the Tank 300 2023-On; Dobinsons MRA front shocks for the Tank 300 2023-On. Every part is load-rated, pair-priced at Dobinsons RRP and dispatched from Australian stock.
Last updated: 10 September 2026
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| GWM / Great Wall | Tank 300 | P01 | 2023 - On | 2.0L Turbo Petrol & Hybrid |
Note: Strut front, coil rear.
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
| Lift | Part Number | Constant Load |
|---|---|---|
| 2" Lift | C59-863 | No Accessories |
| 2" Lift | C59-865 | 100-200Kg |
Rear coil springs are a bolt-in job for an experienced DIY installer or any suspension workshop. Support the axle before removing the old springs, and have the vehicle aligned afterwards if the ride height changes noticeably. Allow around 500km for new springs to settle. Springs only — shocks are sold separately.
Dobinsons has been designing and manufacturing 4WD suspension in Australia for decades, with springs wound and dampers valved for local loads, corrugations and touring distances rather than adapted from an overseas market spec. Every part is backed by a Dobinsons manufacturer warranty. View the full Dobinsons range to match the rest of your build.
GWM Tank 300 2023-On owners restoring sagged ride height or fitting accessories that add constant weight. Pair with matched Dobinsons dampers valved for the lift height you choose.
| Specification | Detail |
|---|---|
| Brand | Dobinsons |
| Type | Rear coil springs |
| Position | Rear axle |
| Sold as | Pair (both sides) |
| Vehicle | GWM Tank 300 2023-On |
| Lift options | 2 inch |
| Load ratings | 100-200 kg |
| Spring rate | Linear rate |
| Part numbers | C59-863, C59-865 |
Load ratings refer to permanent extra weight over the axle. Springs do not change the vehicle's GVM or towing capacity.
Yes — these Dobinsons rear coil springs are made for the GWM Tank 300 2023-On and use the factory spring mounts, so no cutting or drilling is required. Strut front, coil rear.
Lift depends on the option selected and is shown in the dropdown and the options table. Actual height also depends on your current spring sag and the weight permanently carried, so a spring rated for a heavier load will sit higher on an unladen vehicle and settle once accessories are fitted.
Match the rating to weight that is on the vehicle permanently rather than occasionally. Too soft and the vehicle sags with accessories fitted; too firm and it rides harshly unladen. Our team can confirm the right option against your build before you order.
A matched pair (2 x) of Dobinsons coil springs in the option you select, with the exact part number shown in the dropdown. Shocks, struts and other components are sold separately.
Yes. Choose the 2" lift option on this page and pair it with the matching Dobinsons dampers linked above — springs set the lift height and load rating, and the matched shocks control it. The same approach with 3" options builds a 3 inch lift kit for the Tank 300 2023-On.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
