The Tough Dog 2" Lift Kit for Toyota LandCruiser 60 Series delivers proven leaf spring performance engineered for Australia's harshest conditions — from outback touring to heavy-duty work applications. This complete 4WD lift kit provides 50mm of additional ground clearance, improved approach angles, and enhanced load-carrying capability while maintaining the iconic 60 Series ride quality. Backed by Tough Dog's Australian engineering heritage and comprehensive warranty, this kit is in stock now with fast Australia-wide dispatch and expert fitment support.
Browse all compatible suspension parts for your Toyota Landcruiser 60 Series | Complete using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Toyota | LandCruiser | 60 Series | 1980-1990 | 2H, 12H-T, 3B Diesel / 3F Petrol |
| Toyota | LandCruiser | 60 Series | 1980-1990 | FJ62 (Wagon variants) |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page for detailed fitment guidance.
Selecting the correct spring rate is critical for optimal performance and ride quality based on your constant accessory load. This kit is designed for medium to heavy constant loads typically found on touring and work-spec 60 Series builds. Common front accessories affecting spring selection include steel bull bars, winches, long-range fuel tanks, upgraded batteries, and heavy-duty batteries. Rear accessories include dual spare wheel carriers, drawer systems, water tanks, roof-top tents, rear bars, and jerrycan holders. Calculate your total accessory weight (front and rear separately) to ensure this spring rate matches your build specifications.
Professional installation by a qualified 4WD suspension specialist is strongly recommended to ensure correct fitment, safety, and warranty compliance. A full four-wheel alignment is mandatory after installation to prevent premature tyre wear and ensure proper handling characteristics. All leaf spring kits require a 500km break-in period where springs will settle 5-10mm as materials bed in — this is normal and expected. For maximum performance gains, consider pairing this lift with upgraded extended-travel shackles and polyurethane bushings available separately.
Tough Dog has been engineering proven 4WD suspension solutions for Australian conditions since 1993, with every product tested across outback tracks, construction sites, and highway touring applications. Trusted by tradespeople, grey nomads, and serious 4WD enthusiasts nationwide, Tough Dog backs this kit with a comprehensive manufacturer warranty and Australian-based technical support. View the full Toughdog range to complete your 60 Series suspension upgrade with matching steering components and accessories.
This lift kit is ideal for LandCruiser 60 Series owners who demand reliable load-carrying performance for serious touring, remote area work, farm use, or tradesperson applications. Whether you're planning a lap of Australia with a loaded wagon, running a work vehicle with constant heavy equipment, or building a classic touring rig, this kit delivers the durability and performance needed. For those regularly carrying maximum payloads or towing heavy caravans, consider adding airbag suspension to the rear for on-demand load support and level ride height adjustment.
In stock now with fast dispatch across Australia. All Tough Dog kits ship from our Australian warehouse with expert technical support available to guide your installation. Need help choosing the right setup for your 60 Series build? Our suspension specialists are ready to assist. Browse all suspension parts for Toyota LandCruiser or explore our complete range of premium lift solutions.
This Tough Dog lift kit is specifically engineered for Toyota LandCruiser 60 Series models manufactured between 1980 and 1990, covering all engine variants including 2H, 12H-T, 3B diesel and 3F petrol engines. It fits both wagon (FJ62) and hardtop/ute body styles. The kit is designed to work with factory axles and chassis configurations without requiring modifications. If you've made previous modifications to your suspension or chassis, please contact our team to confirm compatibility before ordering.
This complete kit provides 50mm (2 inches) of lift over factory ride height when measured at standard load. The actual lift height can vary by 5-10mm depending on your vehicle's constant accessory load and the condition of your chassis and body mounts. Heavier constant loads from bull bars, winches, drawer systems and touring equipment will compress the springs slightly, while lighter builds may sit marginally higher. After the initial 500km break-in period, springs typically settle 5-10mm as materials bed in and reach their optimal operating height.
This complete lift kit includes four Tough Dog nitro gas shock absorbers (two front, two rear), heavy-duty front and rear leaf spring packs with 50mm lift, all necessary leaf spring bushes and shackles, U-bolts, spring centre bolts, and complete mounting hardware. Everything required for a full four-corner suspension upgrade is included in the one box. The kit does not include extended brake lines, differential drop brackets, or chassis modifications — these are typically not required for the 60 Series at 2 inches of lift, but consult with your installer if fitting larger tyres.
Yes, this Tough Dog kit is well-suited to towing applications with enhanced load-carrying leaf springs designed to handle the additional tongue weight and dynamic loads from trailers and caravans. The heavy-duty spring packs resist sagging under tow ball loads and the nitro gas shocks provide superior damping control when towing. For maximum towing performance and the ability to fine-tune rear ride height when loaded, many 60 Series owners add airbag helper springs to the rear suspension. This combination delivers exceptional versatility for both unladen daily driving and fully-loaded touring with a caravan or camper trailer.
The Toyota LandCruiser 60 Series uses a solid front axle with leaf spring suspension, so it does not have front control arms like IFS vehicles. At 2 inches of lift, no additional suspension geometry correction components are typically required. However, you may wish to inspect and replace worn radius arm bushes, panhard rod bushes, and steering linkage components during installation to maximize the benefit of your new suspension. Worn factory bushes can reduce the performance and handling improvements this kit delivers, so addressing these wear items is recommended on higher-kilometre vehicles.
Yes, a full four-wheel alignment is mandatory after installing any lift kit to ensure proper handling, steering response, and tyre wear characteristics. While the solid front axle design of the 60 Series has limited adjustability compared to IFS vehicles, camber and toe settings still need to be checked and corrected where possible. Rear axle alignment should also be verified to ensure the vehicle tracks straight. Professional alignment using a quality alignment rack should be performed immediately after installation and then rechecked after the 500km break-in period when springs have fully settled.
This kit is supplied with Tough Dog's medium-heavy duty spring rate optimized for typical touring and work applications with constant accessory loads. If you're building a lighter-spec vehicle or require extra-heavy duty springs for extreme constant loads, alternative spring rates may be available — contact our team to discuss your specific build and load requirements. Selecting the correct spring rate based on your actual constant accessory weight (not occasional loads) is critical for achieving optimal ride quality, handling, and spring longevity. Our suspension specialists can help calculate your front and rear loads to recommend the ideal spring specification.
With 50mm of additional lift, this kit provides clearance for tyres up to approximately 33 inches in diameter (285/75R16 or similar) without significant modifications, depending on wheel offset and tyre width. For maximum articulation without rubbing, minor trimming of mudflap brackets or plastic inner guards may be required. Fitting 33-inch or larger tyres will also affect your speedometer reading, gearing, and braking performance — recalibration or gear ratio changes may be beneficial. Always test-fit your chosen tyre and wheel combination and cycle the suspension through full compression and extension to check for contact points before committing to off-road use.
All Tough Dog suspension components are backed by a comprehensive manufacturer warranty covering defects in materials and workmanship. Specific warranty terms apply to different component types — shock absorbers and leaf springs each carry separate coverage periods detailed in the supplied documentation. Warranty coverage requires professional installation by a qualified technician, adherence to recommended service intervals, and use within the product's designed load and application parameters. Retain your proof of purchase and installation records to facilitate any warranty claims. For full warranty terms and conditions, refer to the documentation included with your kit or contact our customer service team.
Absolutely — this Tough Dog kit is engineered to deliver a comfortable daily driving experience while significantly improving capability for touring and off-road use. The nitro gas shock absorbers provide well-controlled damping that absorbs city bumps and highway undulations without harshness, while the multi-leaf spring design maintains the 60 Series' trademark ride comfort. Many owners report improved on-road handling and reduced body roll compared to worn factory suspension. The kit strikes an excellent balance between work-ready load capacity, touring comfort over long distances, and confident handling for both urban commuting and weekend adventures. This versatility makes it ideal for vehicles that serve dual-purpose roles.
Perfect Upgrade for Our Family Adventures
Fitted this 2 inch lift kit to our old 60 Series before our last trip through the Flinders and it's made a world of difference. The extra clearance means we're not scraping over ruts anymore, and the ride quality with a full load of camping gear and the kids in the back is noticeably better than the tired old springs we had. Really happy with how everything bolted up without any dramas, and the price was fair for a complete kit.(5)
Perfect for Daily Work and Weekend Tracks
Been running this Tough Dog 2 inch lift kit on my 60 Series for about six months now, hauling tools and materials to job sites every day. The ride quality is significantly better than the old worn-out springs, especially when loaded up with gear, and it handles the beach and forest tracks on weekends without any dramas. Installation was straightforward enough for my local mechanic to knock over in a day, and the price was fair compared to other kits I looked at.(5)
Sorted My 60 for Remote Touring
Been running this Tough Dog 2-inch lift kit on my 60 Series for about 8 months now, including a proper run through the Simpson and Cape York. The leaf springs handle the constant corrugations and heavy gear without sagging, and the ride quality is noticeably better than the old setup even when loaded to the hilt. Fitment was spot-on with all the bushings and hardware exactly as needed.(5)
Perfect Upgrade for Family Adventure Trips
Fitted this Tough Dog 2 inch lift kit to our old 60 Series about six months ago and it's completely transformed how the rig handles when we're loaded up for camping trips with the kids. The extra clearance has been brilliant on Fraser Island and through the Victorian High Country, and the ride quality is noticeably better than the worn-out standard suspension it replaced. Really impressed with how well everything fitted together during installation, and the leaf springs are handling our rooftop tent and drawer system without any sag.(5)
Perfect Upgrade for My 60 Series
Just finished installing this Tough Dog 2 inch lift kit on my old 60 and couldn't be happier with how it's transformed the ride. Took it out to the High Country last weekend with a full load of camping gear and the difference in handling and clearance was night and day. Fitment was spot on and the leaf springs are noticeably better quality than the old worn-out setup. Well worth the investment for anyone serious about touring in their 60.(5)