The Toughdog 5 Inch Lift Kit for Toyota LandCruiser 80 Series transforms your wagon into the ultimate touring and off-road platform with 125mm lift, premium 45mm big bore adjustable shock absorbers, heavy-duty raised coil springs, and essential geometry correction components. Engineered specifically for the iconic 80 Series platform and proven across Australia's toughest outback conditions, this premium lift kit delivers exceptional ride quality, increased load capacity, and superior off-road capability. Backed by Toughdog's industry-leading warranty and in stock now for fast Australia-wide dispatch.
Browse all compatible suspension parts for your 5" Suspension/Lift Kit Suits - Toyota using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Toyota | LandCruiser | 80 Series | 1990-1998 | 1FZ-FE Petrol / 1HD-T Diesel / 1HD-FT Turbo Diesel |
Not sure if this fits your vehicle or need help confirming your 80 Series variant? Contact our suspension experts for personalised fitment advice or check our FAQ page for more information.
Selecting the correct spring rate is critical for optimal ride quality and suspension performance. Base your spring choice on the constant weight of accessories permanently fitted to your 80 Series, not occasional loads. Common front accessories include bull bars (30-70kg), winches (30-40kg), heavy-duty batteries (20-30kg), long-range fuel tanks, and aftermarket air conditioning systems. Rear constant loads include drawer systems (50-100kg), dual battery setups, water tanks, toolboxes, canopies or roof racks with permanent loads. Occasional loads like camping gear, passengers, and towing should not influence your spring rate selection as they're not constant. Selecting springs rated for more weight than your actual constant load will result in harsh ride quality, premature wear on suspension components, and reduced comfort on corrugated roads.
This comprehensive lift kit requires professional installation by an experienced 4WD suspension specialist or mechanic with coil-sprung vehicle experience. Installation typically takes 6-8 hours and includes removing all four shock absorbers, coil springs, and standard panhard rods, fitting castor correction plates, installing extended brake lines, and replacing with Toughdog components. Wheel alignment is mandatory immediately after installation to set correct castor, camber and toe angles with the new geometry. A 500km break-in period is recommended where springs will settle and dampers bed in — ride height may drop 10-15mm during this period. For 80 Series wagons fitted with heavy bullbars and accessories, consider pairing this kit with upgraded adjustable control arms for additional caster adjustment and improved front-end geometry control.
Toughdog has earned its reputation as Australia's number one suspension brand through decades of engineering excellence, rigorous outback testing, and unwavering commitment to quality. Every Toughdog component is designed specifically for Australian conditions and backed by comprehensive warranty coverage that reflects the brand's confidence in product durability. Trusted by outback tourers, commercial operators, tradespeople and serious 4WD enthusiasts nationwide, Toughdog delivers proven performance when reliability matters most. Explore the complete Toughdog suspension range for additional upgrade options including sway bars, steering dampers and chassis bracing.
This 5 inch lift kit is engineered for serious 80 Series owners who demand maximum ground clearance, substantial tyre fitment, and heavy-duty load capacity for extended outback touring, Cape York expeditions, High Country adventures, or commercial applications. It's ideal for tourers carrying full camping setups, roof-top tents, dual spare tyres, long-range fuel and water, or those towing heavy off-road caravans and camper trailers. Tradespeople using their 80 Series as a mobile workshop will appreciate the enhanced payload capacity and durability. If you regularly carry heavy constant loads but need additional adjustability for varying weights, consider supplementing this kit with airbag suspension for on-demand load levelling and ride height adjustment.
Order your Toughdog 5 inch lift kit for Toyota LandCruiser 80 Series today from 4WD Suspension Australia. We maintain comprehensive Australian stock for fast dispatch, provide expert technical support, and can assist with spring rate selection and all suspension parts for your 80 Series. Experience the Toughdog difference and transform your iconic LandCruiser into the ultimate touring and off-road machine.
Yes, this Toughdog 5 inch lift kit is specifically engineered to fit all Toyota LandCruiser 80 Series models manufactured between 1990 and 1998. This includes all engine variants: 1FZ-FE petrol, 1HD-T naturally aspirated diesel, and 1HD-FT turbo diesel engines. The kit fits both standard and GXL variants regardless of whether your 80 Series is fitted with factory air conditioning, power steering, or ABS braking systems. If you've made significant modifications to your suspension or chassis, or you're unsure about your specific variant, contact our team to confirm fitment before ordering.
This kit delivers approximately 5 inches (125mm) of lift measured at the chassis, significantly increasing ground clearance for serious off-road capability. Actual lift height can vary by 10-20mm depending on your vehicle's current accessory weight, engine variant, and the spring rates you select. Front-heavy setups with bull bars and winches may see slightly less front lift, while rear lift can vary based on constant payload. After the initial 500km break-in period, springs typically settle 10-15mm as they bed in, which is normal and accounted for in the spring design.
This complete kit includes four 45mm big bore adjustable shock absorbers (front and rear), front raised coil springs in your choice of comfort/medium or constant load rating, rear raised coil springs in 0-300kg variable or constant 300kg rating, 5 degree castor correction plates, extended rubber brake lines, front and rear adjustable panhard rods, and all necessary mounting hardware and bushings. Everything required for the suspension lift is included. Additional components like upper control arms, diff drop brackets, or extended brake lines for the rear are not required for the 80 Series platform with this lift height.
Yes, this Toughdog kit is excellent for towing applications including heavy off-road caravans, camper trailers, and boat trailers. The heavy-duty spring rates and upgraded 45mm shock absorbers provide superior load-carrying capacity and improved stability under towing loads. For optimal towing performance, select the rear spring rate based on your constant vehicle weight (permanent accessories), not the towing weight itself. If you regularly tow very heavy loads or want on-demand ride height adjustment, consider adding airbag suspension helpers to this kit, which allow you to increase rear support when towing and return to standard ride height when unloaded for improved comfort.
Control arm upgrades are not mandatory with this 5 inch lift kit as the included 5 degree castor correction plates restore proper front-end geometry for most 80 Series configurations. However, if your vehicle is heavily front-loaded with a large steel bull bar, heavy-duty winch, and multiple accessories, adjustable upper control arms can provide additional castor adjustment range and improved suspension geometry. Adjustable control arms also allow fine-tuning of caster angles during wheel alignment for optimal steering feel and tyre wear patterns. Many serious tourers choose to upgrade control arms for the added adjustability and heavy-duty construction, but standard arms will function adequately with this lift height.
Yes, a full four-wheel alignment is absolutely mandatory immediately after installing this lift kit. Lifting your 80 Series changes critical suspension geometry angles including castor, camber, and toe, which directly affect steering feel, handling characteristics, and tyre wear patterns. The castor correction plates included in this kit restore proper castor angles, but these must be set correctly during professional alignment. Driving without proper alignment after lift installation can result in rapid tyre wear, poor handling, steering wander, and potentially dangerous on-road behaviour. Always use a suspension specialist or alignment shop experienced with lifted 4WD vehicles who understand the specific requirements of modified LandCruisers.
Yes, this kit offers multiple spring rate options to match your specific vehicle configuration and load requirements. Front springs are available in comfort/medium duty or constant load ratings, while rear springs come in 0-300kg variable load or constant 300kg ratings. It's critical to select spring rates based on your permanent accessory weight only—not occasional loads like camping gear or passengers. Selecting springs that are too heavy for your actual constant load will result in harsh ride quality, excessive jarring over bumps, and premature wear on shock absorbers and bushings. When ordering, carefully assess the total weight of permanently fitted accessories including bull bars, winches, drawers, dual batteries, and roof racks to select the appropriate spring rate.
Yes, this 5 inch lift provides substantial clearance for significantly larger tyres than the factory 31 inch setup. Most 80 Series LandCruisers with this lift can comfortably accommodate 33 inch tyres (285/75R16 or 33x10.5R15) with no modifications, and 35 inch tyres (315/75R16 or 35x12.5R15) with minor trimming of plastic inner guards or slight body mount chop. Actual tyre clearance depends on wheel offset, tyre brand and tread pattern, and your specific driving style. Aggressive off-road use with full suspension articulation may require additional trimming even with 33s. Always test-fit and cycle suspension through full travel before committing to extreme tyre sizes, and remember that larger tyres will affect gearing, fuel economy, and braking performance.
Toughdog backs this complete suspension lift kit with comprehensive warranty coverage that reflects their confidence in product quality and durability. Shock absorbers are typically covered by a 3-year or 50,000km warranty (whichever comes first), while coil springs carry a lifetime warranty against breakage or sagging under normal use conditions. All other components including panhard rods, brake lines, and castor correction plates are covered by standard manufacturer warranty against defects in materials and workmanship. Warranty specifics can vary, so retain your purchase receipt and installation records. Note that warranty coverage requires professional installation and proper maintenance, and does not cover damage from accidents, misuse, or modification of components.
Yes, despite the substantial 5 inch lift height, this Toughdog kit maintains surprisingly comfortable daily driving characteristics thanks to progressive spring rates and well-tuned shock absorber valving. The adjustable shock absorbers allow you to fine-tune damping for your preferred balance between comfort and control. Highway manners are stable and composed, though you'll notice the higher centre of gravity in strong crosswinds and during emergency lane changes compared to stock height. Ride quality is firm but not harsh when springs are correctly matched to your vehicle's weight, and the kit handles urban commuting, freeway cruising, and country road touring with confidence. This is an excellent choice for 80 Series owners who want serious off-road capability without sacrificing everyday drivability.
Massive improvement over the old factory setup
Been running this Toughdog lift kit on my 80 Series for six months now, carting tools and materials around work sites every day. The ride quality is leagues better than the worn out stock suspension it replaced, and it handles the loaded weight without any dramas. Had it fitted by a local workshop and everything bolted up perfectly, no mucking around with modifications.(5)
Proper Kit for Serious Outback Work
Been running this Toughdog 5 inch lift kit on my 80 Series for about 8 months now, covering everything from the Canning Stock Route to Cape York's rough stuff. The ride quality is honestly better than stock even when fully loaded with recovery gear, long-range tanks and supplies. Fitment was spot-on and the kit's holding up brilliantly to constant corrugations and creek crossings.(5)
Perfect upgrade for our family camping rig
Fitted this Toughdog 5 inch lift kit to our 80 Series about three months back and it's transformed how the old girl handles with a full load of camping gear and the kids in the back. The ride quality is leagues ahead of the worn out standard suspension, especially on corrugated tracks heading up to the high country. Installation was straightforward enough for my local mechanic, and the price point through 4WD Suspension Australia was spot on compared to what other places were quoting.(5)
Perfect lift for my 80 Series
Just finished installing this Toughdog 5 inch lift kit on my Landcruiser and couldn't be happier with the result. The ride quality is noticeably better than stock, especially when loaded up for touring, and everything fitted exactly as it should. Took it through the High Country last weekend and the extra clearance made a massive difference on the rocky tracks. Great kit for the money and delivery from 4WD Suspension Australia was quick too.(5)
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
