Tough Dog front coil springs for the Toyota LandCruiser 76 Series (2007 onwards), sold per pair. Pick OE height or a 50mm raised spring rated for your bar and winch combination, with sway bar and spring spacers below.
Tough Dog coils are designed and made in Australia from micro-alloyed spring steel – shot-peened, scragged and load-tested, and hot-formed on precision mandrels so the spring keeps its height and rate after years of heavy loading.
Pick the rate for the weight the vehicle actually carries, not the weight you'd like it to carry – and count only permanent accessories and loads (bar, winch, drawers, long-range tank) when choosing. A spring that's too firm for an unloaded vehicle rides worse than the factory item; one that's too soft sags the moment you load up.
Fit springs in pairs per axle, and book a wheel alignment after any change in ride height. It's also worth checking brake-line slack and bump-stop condition while the suspension is apart.
Doing the whole vehicle at once? We also stock the matching rear Leaf Springs and rear Shock Absorbers for the Toyota LandCruiser 76, 78 & 79 Series.
Match them with Tough Dog front shocks.
| Make | Model | Series | Years |
|---|---|---|---|
| Toyota | LandCruiser | 76 Series (4.5L V8, 4.2L 6cyl, 2.8L 4cyl) | 2007 - On |
| Toyota | LandCruiser | 78, 79 Series Single Cab (4.5L V8, 4.2L 6cyl, 2.8L 4cyl) | 10/1999 - On |
| Toyota | LandCruiser | 78, 79 Series Dual Cab (4.5L V8, 2.8L 4cyl) | 2012 - On |
Genuine Tough Dog suspension from an authorised Australian dealer.
New to LandCruiser 79 Series suspension? Read our LandCruiser 79 Series suspension problems guide.
The fitment table on this page lists the exact applications, build dates and engine variants covered. Check yours against it – and if you're not certain, contact us with your rego or VIN details and we'll confirm fitment before you order.
The listed price covers both sides – always replace left and right together so the axle is evenly damped and sprung. It's a bolt-in job for a competent home mechanic or any workshop; check bushes, mounts and brake-line slack while everything is apart.
Install the TDSP-031 spacer if the tailshaft contacts the swaybar - contact us and we can add it to your order.
A moderate suspension lift is generally acceptable in most Australian states, but the allowed total lift and whether certification is needed differ between states and change over time – so always confirm with your state’s transport authority before modifying. Our guide explains how the rules work state by state: are lift kits legal in Australia?
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.