Toughdog front coil springs for the Nissan D40 Navara deliver proven heavy-duty performance with precise spring rate options to match your constant load — engineered and tested across Australia's toughest terrain. These premium coil springs restore or enhance your Navara's ride height while maintaining excellent on-road comfort and off-road capability. Backed by Toughdog's Australian warranty and available with fast nationwide dispatch from our Australian warehouse.
Browse all compatible suspension parts for your Front Coil Springs Nissan D40 Navara using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Nissan | Navara | D40 | 2005-2015 | 2.5L YD25DDTi, 3.0L V6 V9X, 4.0L V6 VQ40DE |
| Nissan | Navara | D40 (Spanish Built) | 2005-2015 | All Diesel and Petrol Variants |
| Nissan | Navara | D40 (Thai Built) | 2005-2015 | All Diesel and Petrol Variants |
Not sure if this fits your vehicle? Contact our suspension experts or use our D40 Navara parts finder to view all compatible suspension components.
Selecting the correct spring rate is critical for achieving optimal ride quality and suspension performance. Choose your spring rate based on the constant load you carry — permanent accessories that remain on your vehicle at all times. Front constant loads for the D40 Navara typically include bull bars (25-40kg), steel winch and winch bar (30-50kg), dual battery systems (15-25kg), long-range auxiliary fuel tanks, upgraded steel bumpers, roof racks with permanent storage, and heavy-duty bash plates. Do NOT select spring rates based on occasional loads like camping gear, tools, or intermittent towing — these should be managed with correct rear spring selection or supplementary airbag suspension systems. Selecting too heavy a spring rate will result in a harsh, uncomfortable ride and may cause premature wear to other suspension components including bushes, shock absorbers, and steering components.
Professional installation by a qualified mechanic or experienced 4WD suspension specialist is strongly recommended for coil spring replacement. Installation requires specialist spring compressors and proper safety equipment to safely remove and install front coil springs. A full wheel alignment is mandatory after installation to ensure correct camber, caster, and toe settings — failure to align can result in uneven tyre wear and compromised handling. Allow a 500km break-in period for springs to settle and achieve their final ride height. When upgrading front coils, consider pairing with upgraded steering dampers and matching rear leaf springs for a balanced, complete suspension system.
Toughdog is Australia's most trusted name in 4WD suspension, with over three decades of engineering excellence and real-world outback testing. Every Toughdog component is designed to withstand the unique demands of Australian touring — from corrugated outback tracks to beach driving, heavy towing, and daily urban commuting. Toughdog springs are backed by comprehensive manufacturer warranty and are the preferred choice of Australian tourers, tradespeople, mining operators, and 4WD enthusiasts who demand proven reliability. Explore the complete Toughdog suspension range for matched shock absorbers, steering dampers, and complete lift kit solutions.
These front coil springs are ideal for Nissan D40 Navara owners who have added aftermarket bull bars and accessories, experience front-end sag from constant weight, or require improved load-carrying capacity for work or touring. Tradespeople carrying heavy tools and equipment, touring enthusiasts with roof-top tents and dual battery systems, and daily drivers seeking to restore original ride height will all benefit from correctly rated Toughdog coils. If you frequently tow caravans or trailers and need additional rear load support, consider pairing these springs with heavy-duty leaf springs or supplementary airbag systems for maximum versatility and load control.
All Toughdog suspension components are in stock at our Australian warehouse with fast dispatch to all states and territories. Our suspension experts are available to help you select the correct spring rate for your specific load requirements and recommend complete matched suspension solutions. Ready to restore your D40 Navara's ride quality and load capacity? Order now with confidence, or browse our full range of lift kits for complete front and rear suspension upgrade packages.
These Toughdog front coil springs are specifically engineered for all Nissan D40 Navara models produced between 2005 and 2015, including both Spanish-built and Thai-built variants. They fit all engine options including the 2.5L YD25DDTi turbo diesel, 3.0L V6 diesel, and 4.0L V6 petrol engines. The springs are compatible with both single cab and dual cab body styles. If you're unsure about your specific variant, contact our team with your VIN number for confirmation, or use our online parts finder tool to verify exact fitment for your Navara.
Toughdog front coil springs are primarily designed to restore or maintain correct ride height rather than provide significant lift. The actual height increase depends on your selected spring rate and current accessory load. Most customers experience 0-30mm of lift when replacing worn factory springs, with height varying based on the weight of bull bars, winches, and other front accessories. These springs are engineered to support constant loads while maintaining optimal suspension geometry. For higher lift applications (40mm+), consider a complete Toughdog lift kit that includes matched springs, shock absorbers, and any necessary suspension components for your desired height.
This kit includes a pair (two) of Toughdog heavy-duty front coil springs specifically designed for the Nissan D40 Navara — one for the driver's side and one for the passenger's side. The springs feature high-tensile steel construction with corrosion-resistant powder coating for long-term durability. Installation hardware such as spring seats, isolators, and retaining clips are NOT included as OEM components are typically reused during installation. Shock absorbers, control arms, steering dampers, and other suspension components are sold separately. Contact us if you need assistance selecting a complete matched suspension package for your Navara.
Yes, these Toughdog front coil springs significantly improve towing stability and front-end control when correctly matched to your constant accessory load. They reduce front-end dive and maintain proper weight distribution when towing caravans, camper trailers, or heavy-duty equipment trailers. However, remember that front springs should be selected based on permanent front weight (bull bar, winch, etc.), not towing loads. For maximum towing capability, pair these front springs with appropriately rated rear leaf springs or airbag suspension systems that can handle the increased rear tongue weight and payload. This combination delivers balanced suspension performance for safe, stable towing across all conditions.
Control arm upgrades are not mandatory when installing Toughdog front coil springs on a D40 Navara, as these springs maintain factory suspension geometry and modest lift heights. However, if you're building a complete suspension system with higher lift (40mm+), or if your factory control arms show wear, cracking, or damaged bushes, upgrading to heavy-duty adjustable control arms is highly recommended. Upgraded control arms provide improved wheel alignment adjustability, better ground clearance, stronger ball joints, and enhanced off-road durability. They also allow fine-tuning of caster and camber angles for optimal handling and tyre wear, particularly when running larger tyres or increased ride height.
Yes, a professional four-wheel alignment is absolutely mandatory after installing any new coil springs on your Nissan D40 Navara. Changing front springs alters suspension geometry and ride height, which directly affects camber, caster, and toe settings. Without proper alignment, you'll experience uneven and premature tyre wear, poor handling characteristics, steering pull, and compromised vehicle safety. Book your alignment with a reputable suspension or 4WD specialist who has experience with lifted and modified vehicles. Most alignment shops recommend rechecking alignment after 500-1000km once springs have fully settled to their final ride height for optimal long-term results.
Yes, Toughdog front coil springs for the D40 Navara are available in multiple spring rates to precisely match your constant accessory load. During ordering, you'll select your spring rate based on the permanent weight you carry on the front of your vehicle — typically bull bars, winches, steel bumpers, and auxiliary lighting. It's critical to select spring rates based only on constant loads, not occasional camping gear or equipment. Selecting too soft a spring will cause excessive sag and bottoming out, while choosing too heavy a spring rate will result in harsh ride quality and potential damage to other suspension components. Contact our team if you need assistance calculating your front axle weight and selecting the optimal spring rate.
Toughdog front coil springs provide modest lift (typically 0-30mm) which allows limited tyre size increases on the D40 Navara without additional modifications. Most customers can fit 265/75R16 or 265/70R17 tyres with minimal to no rubbing at full lock or compression. For larger tyres (285mm+ width or 32-33 inch diameter), you'll likely need additional modifications including diff drop kits, body mount chops, guard trimming, or aftermarket control arms with increased clearance. Tyre fitment also depends on wheel offset, backspacing, and suspension travel. Always test fit new tyres through full steering lock and suspension compression cycles before committing to installation to avoid expensive rubbing damage.
Toughdog coil springs are backed by a comprehensive Australian manufacturer warranty that covers defects in materials and workmanship under normal operating conditions. The exact warranty period and terms are provided with your purchase and vary based on application and usage type. Warranty coverage typically requires professional installation by a qualified mechanic with proof of installation and proper spring rate selection based on actual constant load. Warranty does not cover damage caused by incorrect spring rate selection, overloading beyond rated capacity, accident damage, or normal wear and tear. Always retain your purchase receipt and installation documentation for warranty claims, and contact us immediately if you experience any product issues.
Absolutely — when correctly matched to your constant load, these Toughdog front coil springs deliver excellent ride quality for daily driving, urban commuting, and highway touring. Toughdog engineers specifically design their springs to balance load capacity with on-road comfort, avoiding the harsh, jarring ride associated with poorly designed or incorrectly rated springs. The key is selecting the appropriate spring rate for your actual front axle weight — not over-springing for loads you don't carry. Many D40 Navara owners use their vehicles as daily drivers while also tackling weekend off-road adventures, heavy towing, and extended touring trips. These springs provide the versatility and durability needed for mixed-use applications without compromising comfort or safety.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
