The Toughdog Front Remote Reservoir Adjustable Struts for Mazda BT50 2020+ deliver race-proven performance with on-the-fly damping adjustment — giving you complete control over ride comfort, load carrying, and off-road capability. Featuring remote reservoir technology for superior heat management and fade-free performance, these premium adjustable shock absorbers are engineered and tested in Australian conditions. Designed to work seamlessly with upgraded coil springs and complete lift kit systems, these struts deliver professional-grade suspension performance. Australian stock with full manufacturer warranty and fast nationwide dispatch.
Browse all compatible suspension parts for your Front Remote Res Adjustable Struts using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Mazda | BT-50 | TFS (Third Generation) | 2020 onwards | 3.0L Turbo Diesel |
| Mazda | BT-50 | TFS (Third Generation) | 2020 onwards | Single Cab / Dual Cab / Extra Cab |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page for detailed compatibility information and spring rate selection guidance.
Selecting the correct spring rate is critical to achieving optimal ride quality and suspension performance with your Toughdog adjustable struts. Your spring choice must be based on your constant accessory load — the weight permanently fitted to your BT50 including bull bars, winches, steel bumpers, roof racks, canopies, drawer systems, long-range fuel tanks, and dual battery setups. Occasional loads such as camping gear, firewood, water tanks, or towing a caravan should not be included in your spring rate calculation, as oversized springs will result in harsh ride quality and potential damage to other suspension components. For occasional heavy loads or towing, consider pairing your lift kit with airbag suspension systems that allow you to adjust load support on demand without compromising unladen ride comfort.
Professional installation by an experienced 4WD suspension specialist is strongly recommended to ensure correct fitment, adjustment setup, and optimal performance of your Toughdog remote reservoir struts. Wheel alignment is mandatory after installation to prevent uneven tyre wear and ensure proper steering geometry, and a 500km break-in period is required to allow seals and bushings to properly seat. For maximum suspension performance and geometry correction on lifted BT50s, consider pairing these struts with upgraded control arms that restore factory caster angles and improve steering feel. The remote reservoirs must be securely mounted with adequate clearance from moving components, exhaust systems, and potential trail debris.
Toughdog has earned its reputation as one of Australia's most trusted 4WD suspension brands through decades of real-world testing in the harshest outback conditions. Every Toughdog product is engineered to withstand the extreme demands of Australian touring, from the corrugated Simpson Desert tracks to the boulder-strewn Cape York trails, and is backed by comprehensive warranty coverage and local Australian support. Whether you're a tradesperson who relies on your BT50 daily, a grey nomad towing a van around Australia, or a weekend warrior chasing remote campsites, Toughdog delivers the durability and performance you need — view the full Toughdog suspension range for complete suspension solutions.
These Toughdog remote reservoir adjustable struts are ideal for Mazda BT50 owners who demand professional-grade suspension performance: tradespeople carrying heavy tool loadouts and equipment, touring families with roof-top tents and camping gear, and serious off-road enthusiasts who regularly tackle challenging terrain. If you frequently tow caravans, camper trailers, or work trailers, the adjustable damping allows you to increase control and stability under load, while the remote reservoir prevents fade on long downhill grades. For ultimate load versatility, pair these struts with airbag suspension to independently adjust rear load support without affecting your front suspension tuning.
Upgrade your Mazda BT50 2020+ with Toughdog's premium remote reservoir adjustable struts — Australian engineered, extensively tested, and ready for dispatch from local stock. Our suspension experts are available to help you select the perfect spring rates and complete your build with complementary components. Browse our full lift kit range or contact our team for personalised suspension advice tailored to your specific BT50 setup and intended use.
Yes, these Toughdog Front Remote Reservoir Adjustable Struts (FRA-MB50) are specifically engineered for Mazda BT50 third generation (TFS series) models from 2020 onwards, including all cab configurations (Single Cab, Extra Cab, and Dual Cab) fitted with the 3.0L turbo diesel engine. The struts are designed as direct replacements for the factory front suspension units and integrate seamlessly with upgraded coil springs and lift kit components. If you've modified your BT50 with aftermarket suspension components or have an earlier model year, please contact our team to confirm compatibility before ordering.
These Toughdog remote reservoir struts are designed to work with upgraded coil springs to achieve your desired lift height — the struts themselves do not determine lift, but rather provide the damping control and performance for lifted applications. Depending on your chosen spring rate and constant accessory load, typical lift heights range from 30mm to 50mm when paired with appropriate Toughdog coil springs. The adjustable damping allows you to fine-tune the ride quality and performance at your chosen lift height, ensuring optimal control whether running a mild 30mm lift or a more aggressive 50mm setup. Our suspension specialists can recommend the ideal spring and strut combination for your specific lift goals and vehicle setup.
This kit includes two complete Toughdog front remote reservoir adjustable struts with pre-fitted adjustment knobs, two remote reservoir canisters with mounting brackets, high-pressure braided hose assemblies connecting the struts to reservoirs, upper strut mounts and bearings, all necessary mounting hardware, and a detailed installation guide with adjustment chart. Please note that coil springs are sold separately and must be selected based on your constant accessory load to ensure proper ride height and quality. Professional installation is recommended to ensure correct reservoir mounting, hose routing, and initial damping setup for your specific BT50 configuration and intended use.
Absolutely — these Toughdog remote reservoir adjustable struts are excellent for towing applications thanks to their adjustable damping and superior heat dissipation design. The remote reservoir keeps shock oil temperatures lower during extended towing, preventing fade on long highway trips and steep descents, while the adjustable damping allows you to stiffen the front suspension for improved stability and control when towing heavy loads. For the ultimate towing setup, consider pairing these front struts with quality rear shocks and airbag suspension at the rear to independently manage payload and towball weight. The adjustability means you can run a comfortable setting for unladen daily driving, then firm up the damping when hooking up your caravan for touring trips.
While not mandatory for installation, upgraded control arms are highly recommended when lifting your BT50 to maintain proper suspension geometry and steering characteristics. Factory control arms can limit wheel travel and cause caster angle changes that affect steering feel and stability, particularly with lifts over 40mm. Aftermarket control arms restore factory geometry, increase wheel travel for better off-road articulation, and often feature stronger construction with replaceable bushings for long-term durability. Our suspension experts can advise whether your intended lift height and driving style warrant control arm upgrades, and help you select the best options for your specific BT50 build and budget.
Yes, professional wheel alignment is absolutely mandatory after installing these Toughdog struts and any associated lift components. Any suspension modification changes your vehicle's geometry, camber, caster, and toe settings, which can cause uneven tyre wear, poor handling, and reduced steering stability if not properly aligned. A qualified 4WD suspension specialist should perform a full four-wheel alignment using your BT50's specific alignment specifications, adjusted for your new ride height. This ensures maximum tyre life, optimal handling characteristics, and safe on-road performance. Most reputable suspension installers include alignment in their installation service, and you should request a print-out of before and after alignment readings for your records.
Yes, selecting the correct spring rate is one of the most important decisions when building your BT50 suspension system, and these Toughdog struts are designed to work with a range of spring rates to suit different load requirements. You must calculate your constant accessory load — the combined weight of all permanently fitted accessories including bull bars, winches, steel bumpers, canopies, drawer systems, roof racks, long-range tanks, and dual battery setups. Do not include occasional loads like camping gear, firewood, or passengers in this calculation, as over-springing will result in harsh ride quality. Our team can help you select the ideal spring rate based on your specific accessory setup and intended vehicle use.
The ability to fit larger tyres depends on your total lift height achieved (determined by your chosen coil springs paired with these struts), your BT50's specific cab configuration, and whether you've modified guards or fitted aftermarket bullbars. Typical lifts of 30-50mm combined with appropriate suspension components generally allow fitment of 32-33 inch tyres on the 2020+ BT50 without major modifications, though some minor trimming of plastic guard liners may be required at full lock and compression. Larger tyres beyond 33 inches typically require additional body modifications, diff drops, or more aggressive lift heights. Always test-fit tyres through full suspension articulation and steering lock before committing to a particular size, and consider that larger tyres affect gearing, fuel economy, and speedo accuracy.
Toughdog stands behind their products with comprehensive warranty coverage that reflects their confidence in Australian engineering and manufacturing quality. Specific warranty terms vary by component type and are detailed in the documentation included with your kit, typically covering manufacturing defects and premature wear under normal use conditions. Warranty coverage requires professional installation by a qualified technician, proof of purchase, and adherence to specified service intervals and break-in procedures. Keep all installation receipts, alignment records, and product documentation for warranty claims. For detailed warranty terms specific to this product, contact our team or refer to the Toughdog warranty card included with your purchase.
Yes, these Toughdog remote reservoir adjustable struts are specifically designed to deliver excellent on-road comfort for daily driving while providing the capability for serious off-road and towing applications when needed. The key advantage of adjustable damping is the ability to dial in a softer, more compliant setting for daily commuting and highway cruising, reducing fatigue and harshness over city roads and rough country highways. When you need extra control for towing, heavy loads, or off-road terrain, simply adjust the damping to a firmer setting for improved stability and performance. This versatility makes these struts ideal for BT50 owners who use their vehicle as both a daily driver and weekend adventure rig, without compromising comfort or capability in either role.
Perfect Upgrade for Our Family BT50
Been running these Toughdog adjustable struts on our 2021 BT50 for about three months now, covering a few trips down to the South Coast and out to the High Country. The adjustability means I can soften things up for the highway run with the kids, then firm it up when we're loaded with camping gear and hitting the tracks. Ride quality is noticeably better than the factory setup, especially over corrugations, and fitment was spot-on with no dramas during installation.(5)
Game Changer for Remote Outback Work
Been running these adjustable struts on my BT50 for the past six months through the Canning Stock Route and Simpson Desert with varying loads, and the ability to dial in the damping has been absolutely crucial. The remote reservoir setup keeps everything running cool even on corrugated tracks in 40-degree heat, and the ride quality is miles ahead of the factory units. Fitment was spot-on with no dramas, and they've handled everything from deep sand to rocky creek crossings without missing a beat.(5)
Perfect Upgrade for Our Family Adventure Rig
These Toughdog adjustable struts have completely transformed how our BT50 handles on corrugated roads and beach tracks. We do regular trips down to the Coorong and up through the Flinders, and the difference in comfort with a loaded roof rack and camping gear is night and day. The adjustability means I can fine-tune the setup depending on whether we're empty or fully loaded for a week away. Well worth the investment for anyone serious about touring with the family.(5)
Perfect Upgrade for Our Family Adventures
Fitted these Toughdog adjustable struts to our BT50 before our latest trip down to Wilsons Prom and the difference is night and day. The adjustability means we can fine-tune the ride whether we're loaded up with camping gear or running light, and the kids actually stopped complaining about the washboard roads. Really impressed with how well they handle the extra weight of our rooftop tent and drawers without the front end sagging.(5)