The Toughdog Suspension Lift Kit for Nissan D21 Navara delivers proven outback durability with heavy-duty torsion bars, raised leaf springs, and matched shock absorbers engineered to handle Australia's toughest conditions. Built specifically for the D21 platform, this complete 4WD lift kit transforms your Navara's load-carrying capability, ride quality, and off-road clearance while maintaining on-road comfort. Backed by Toughdog's Australian warranty and real-world testing, this kit is in stock now with fast dispatch Australia-wide.
Browse all compatible suspension parts for your Nissan D21 Navara using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Nissan | Navara | D21 | 1986-1997 | Petrol & Diesel |
Not sure if this fits your vehicle? Contact our suspension experts or use our parts finder for all Nissan Navara suspension components to confirm exact compatibility.
Selecting the correct spring rate is critical for optimal ride quality and component longevity. Choose your spring rate based on the constant accessory load your D21 Navara carries — this means weight permanently installed, not occasional loads. Common constant-load accessories include steel bull bars, winches, dual battery systems, long-range fuel tanks, steel canopies or trays, UHF radios, roof racks with lighting, drawer systems, and fridge slide mounts. Occasional loads such as camping gear, water, firewood, passengers, or towing weight should not be included in your spring rate calculation. Selecting a spring rate heavier than your actual constant load will result in a harsh ride, increased wear on bushings and suspension components, and potential damage to other drivetrain parts.
Professional installation by a qualified 4WD suspension specialist is strongly recommended to ensure correct fitment, torque specifications, and safety. Installation involves removal of factory torsion bars and rear leaf springs, fitting new components, and comprehensive safety checks. A full four-wheel alignment is mandatory after installation to prevent premature tyre wear and ensure safe handling characteristics. All torsion bars and leaf springs require a 500km break-in period during which the suspension will settle and ride quality will improve as components mate and bushings bed in — avoid maximum payloads during this initial period.
Toughdog has earned its reputation as Australia's number one 4WD suspension brand through decades of real-world testing across the harshest outback environments, from the Simpson Desert to Cape York. Every Toughdog kit is engineered to Australian conditions and backed by comprehensive warranty coverage, giving you confidence whether you're a tradie relying on your Navara for daily work or a touring enthusiast exploring remote tracks. The complete Toughdog suspension range is trusted by thousands of Australian four-wheel drivers who demand proven durability, consistent performance, and outstanding value.
This lift kit is ideal for Nissan D21 Navara owners who carry trade tools and equipment daily, tour with camping and recovery gear, tow trailers or boats regularly, or simply want improved off-road capability and ground clearance for weekend adventures. If you regularly carry heavy constant loads or tow caravans, consider pairing this suspension upgrade with airbag suspension for on-demand load adjustment and enhanced stability. Whether you're a tradesperson, weekend warrior, or serious tourer, this Toughdog kit delivers the performance and reliability your D21 Navara demands.
Ready to transform your Nissan D21 Navara's capability? This complete Toughdog lift kit is in stock now at 4WD Suspension with fast dispatch across Australia and expert technical support to ensure you get the perfect setup for your needs. Need help selecting the right spring rates or want advice on complementary upgrades? Our suspension specialists are here to help. Browse our full range of 4WD lift kits or contact us today to get your D21 Navara ready for its next adventure.
This Toughdog lift kit is specifically engineered to fit Nissan D21 Navara models from 1986 to 1997, covering both petrol and diesel engine variants. The kit suits single cab, dual cab, and extra cab body configurations with the original torsion bar front suspension and leaf spring rear suspension. If you have a modified D21 or are unsure about your vehicle's exact specifications, please contact our team or use our parts finder tool to confirm fitment before ordering.
This Toughdog kit provides approximately 40-50mm of lift at the front through heavy-duty torsion bars and 50mm at the rear through raised leaf springs, depending on your vehicle's current condition and the spring rate selected. The actual lift height achieved will vary based on your constant accessory load, with heavier loads compressing the springs slightly more. The lift height is designed to improve ground clearance and approach angles while maintaining safe geometry and allowing fitment of slightly larger tyres without rubbing issues.
This complete kit includes a pair of Toughdog front shock absorbers, a pair of rear shock absorbers, two heavy-duty front torsion bars, a pair of raised rear leaf springs, rear leaf spring bushes, rear spring U-bolts, and all necessary mounting hardware. Everything required for a complete front and rear suspension upgrade is included except for upper control arms, which are not typically required for this lift height. The kit comes with detailed fitting instructions to assist with professional installation.
Yes, this Toughdog kit is excellent for towing applications when the correct rear spring rate is selected to match your towing requirements. The heavy-duty rear leaf springs and matched shock absorbers significantly reduce rear-end squat when towing trailers, boats, or caravans, maintaining proper braking geometry and steering control. For frequent heavy towing, select a heavier rear spring rate during ordering, or consider adding airbag suspension as a supplementary upgrade for on-demand load adjustment and maximum versatility across varying towing weights.
For the 40-50mm lift provided by this Toughdog kit, upgraded control arms are generally not required for the Nissan D21 Navara as this lift height maintains acceptable suspension geometry and ball joint angles. However, if you plan to install a more aggressive lift in the future, carry extremely heavy constant loads, or want to maximise wheel travel for serious off-road use, aftermarket upper control arms can provide additional caster adjustment and ball joint clearance. Our suspension experts can advise on whether control arms would benefit your specific setup and driving requirements.
Yes, a full four-wheel alignment is absolutely mandatory after installing any suspension lift kit on your D21 Navara. Changing torsion bar height and leaf spring position alters your vehicle's camber, caster, and toe settings, which will cause rapid and uneven tyre wear if not corrected. The alignment must be performed by a workshop with 4WD suspension experience, as they'll need to set caster and camber to suit the lifted ride height. Proper alignment also ensures safe handling characteristics, predictable steering response, and optimal braking performance with your new suspension setup.
Absolutely — selecting the correct spring rate for your specific constant accessory load is crucial for optimal performance and ride quality. During checkout, you'll specify both front and rear spring rates based on the permanent weight your D21 carries, such as bull bars, winches, canopies, drawer systems, and long-range tanks. Front spring rates are determined by accessories ahead of the front axle, while rear rates depend on tray/canopy weight, drawer systems, dual batteries, and rear-mounted accessories. Our team can help calculate your constant load and recommend the ideal spring combination for your Navara's configuration.
This 40-50mm lift typically allows fitment of tyres up to 31-32 inches in diameter on the D21 Navara without significant rubbing issues, though exact clearance depends on wheel offset, tyre brand, and whether you trim mudflaps or plastic guards. Popular tyre sizes include 265/75R16 and 31x10.5R15, which provide improved off-road traction and ground clearance while maintaining reasonable road manners. For larger tyres or maximum articulation clearance, minor trimming of plastic guards may be required. Always test-fit tyres at full steering lock and suspension compression before committing to a tyre purchase.
This Toughdog lift kit is backed by Toughdog's comprehensive Australian manufacturer warranty, covering defects in materials and workmanship under normal operating conditions. Shock absorbers typically carry a 12-month warranty, while torsion bars and leaf springs are covered for the warranty period specified by Toughdog at time of purchase. Warranty claims require proof of purchase and professional installation, and damage caused by incorrect installation, inappropriate spring rate selection, overloading beyond rated capacity, or accident damage is not covered. Full warranty terms are provided with your kit and available from our customer service team.
Yes, when the correct spring rates are selected, this Toughdog kit delivers excellent daily driving comfort and stable highway manners alongside its off-road capability. Toughdog's foam cell shock technology provides controlled damping for comfortable ride quality on sealed roads while still handling corrugations and rough tracks effectively. The key to comfortable daily driving is honest spring rate selection — choosing springs matched to your actual constant load rather than overestimating and ending up with an overly firm ride. Thousands of Australian D21 Navara owners use Toughdog suspension for daily commuting, weekend touring, and everything in between with excellent results.
Perfect Upgrade for Family Camping Adventures
Just finished installing this Toughdog lift kit on my D21 and took the family out to the High Country for a weekend trip – what a difference! The ride quality is noticeably smoother even with the camper trailer and all our gear loaded up, and it handled the corrugated tracks way better than the old setup. Really impressed with how comprehensive the kit is, everything needed was included and the instructions were clear enough for a home install. Highly recommend for anyone doing regular touring with a loaded rig.(5)
Handles the Work Load No Worries
Been running this Toughdog lift kit on my D21 for about six months now, carting tools and materials around Sydney every day. The difference in load capacity is massive – back end doesn't sag anymore even when I'm loaded up with gear, and the ride's actually smoother than the old setup. Fitment was spot on too, everything bolted up without drama.(5)
Proven Kit for Serious Remote Work
Been running this Toughdog lift kit on my D21 for eight months now, including two trips through the Simpson and countless tracks out west of Birdsville. The torsion bars hold up brilliantly under my touring load without the constant sagging I had with the previous setup, and the shocks handle corrugations far better than expected at this price point. Fitment was spot-on with all hardware included, which saved me a trip to the fastener shop mid-install.(5)
Perfect Upgrade for Family Touring
Finally got the Toughdog lift kit fitted to my D21 and couldn't be happier with how it's transformed the old girl. We've done two camping trips up to the High Country since the install and the ride quality is noticeably better, especially with the camper trailer and all the kids' gear loaded up. The extra clearance has been brilliant on rougher tracks too, and everything fitted perfectly without any dramas.(5)
Proper Upgrade for My Work Navara
Been running this Toughdog lift kit on my D21 for about 6 months now, carting tools and building materials every day. The ride quality is heaps better than stock, especially when loaded up, and it handled the Cape York trip last month without any dramas. Installation was straightforward with all the hardware included, and the bloke at 4WD Suspension actually knew what he was talking about when I called with a question.(5)