Toughdog rear coil springs for the Isuzu MU-X 2021+ deliver Australian-engineered performance with precision load ratings tailored to your vehicle's exact constant weight requirements. Designed to restore or enhance ride height while maintaining comfort and stability, these premium coil springs provide the perfect foundation for tourers, daily drivers and serious 4WD enthusiasts. Backed by Toughdog's proven warranty and decades of Australian suspension expertise, with fast dispatch from our local warehouse.
Browse all compatible suspension parts for your Rear Coil Springs Isuzu Mu-X 2021+ using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Isuzu | MU-X | RJ (2nd Gen) | 2021-Current | 3.0L TD (4JJ3) |
Not sure if this fits your vehicle or which spring rate you need? Contact our suspension experts for personalised advice or browse all suspension parts for the Isuzu MU-X.
Choosing the correct spring rate is critical for optimal performance, comfort and longevity of your suspension system. Toughdog rear coil springs are available in multiple load ratings designed to match your vehicle's constant accessory load — meaning the total weight of permanently installed accessories carried in or on your MU-X at all times. Occasional loads such as camping gear, passengers or towing are not considered constant loads and should not influence your spring selection, as over-springing will result in harsh ride quality and potential damage to other suspension components.
Common rear constant accessories for Isuzu MU-X: Dual battery systems, fixed storage drawers, fridge slides, second fuel tanks, permanent water tanks, steel or aluminium canopies, fixed roof racks, rear bar upgrades, and permanently mounted spare wheel carriers. Calculate the total weight of your installed accessories and select the appropriate spring rate to match your specific constant load — our team can assist if you're unsure.
Professional installation by a qualified suspension technician or experienced DIY mechanic is recommended for coil spring replacement on the Isuzu MU-X. Installation requires appropriate spring compressors, safety equipment and mechanical knowledge to safely remove and install rear coil springs. Wheel alignment is mandatory after any suspension modifications to ensure correct geometry, even tire wear and safe handling characteristics. All Toughdog springs require a 500km break-in period during which springs will settle to their final ride height — avoid extreme loads or harsh off-road driving during this initial settling phase.
For vehicles with significant lift or heavy constant loads, consider pairing these rear springs with upgraded control arms to restore suspension geometry and improve driveline angles, ensuring optimal performance and component longevity.
Toughdog has earned its reputation as Australia's number one 4WD suspension brand through decades of engineering excellence, rigorous outback testing and unwavering commitment to quality. Every Toughdog spring is designed specifically for Australian conditions and vehicles, backed by comprehensive warranty coverage and supported by a nationwide network of specialist retailers and installers. Trusted by touring families, tradespeople and serious 4WD enthusiasts across the country, Toughdog delivers proven performance you can depend on whether you're commuting to work or exploring remote Australia.
Explore the complete Toughdog suspension range for matching front springs, shock absorbers and complete lift kit solutions engineered for your Isuzu MU-X.
These Toughdog rear coil springs are ideal for Isuzu MU-X owners who have installed permanent rear accessories and need to restore proper ride height and handling, or those looking to upgrade from worn factory springs for improved load-carrying capability. Perfect for tradespeople carrying tools and equipment, touring families with dual battery systems and fridge setups, or caravan towers seeking a stable rear suspension foundation. If you regularly tow heavy trailers or caravans, consider complementing these springs with airbag suspension for adjustable load support and level towing stance.
Ready to upgrade your Isuzu MU-X suspension? These Toughdog rear coil springs are in stock now with fast Australia-wide dispatch. Our suspension specialists are available to help you select the perfect spring rate for your specific vehicle setup and constant load requirements. Need a complete suspension solution? Browse our full lift kit range for comprehensive front and rear packages with matched springs and shock absorbers.
Yes, these Toughdog rear coil springs (SKU 7009) are specifically engineered for the second-generation Isuzu MU-X (RJ series) from 2021 onwards, including all current models with the 3.0L turbo diesel engine. They are designed as direct OEM replacements using factory mounting points and require no modifications for standard fitment. If you have an earlier MU-X model (2013-2020), you will need a different spring part number designed for the first-generation platform. Contact our team if you're unsure of your vehicle's exact year or series.
These Toughdog rear coil springs are primarily designed to restore factory ride height on vehicles with sagging original springs or to support constant accessory loads without excessive squat, rather than provide significant lift. The actual height increase depends on your selected spring rate and your vehicle's constant rear load — springs matched to your accessories will typically restore 20-40mm of lost height on worn vehicles. For a measured lift setup, these should be paired with appropriately rated front coil springs to achieve a balanced stance. The spring rate you select based on your constant load will determine the final ride height outcome.
This kit includes a pair (2 pieces) of Toughdog heavy duty rear coil springs engineered specifically for the Isuzu MU-X 2021+ platform. The springs feature corrosion-resistant powder coat finish and are manufactured to Australian compliance standards. You will need to reuse your original spring isolators (rubber seats) from your factory springs, so inspect these during installation and replace if worn or damaged. This kit does not include shock absorbers, front coil springs, or installation hardware — these components are available separately and can be selected based on your specific vehicle requirements.
These Toughdog rear coil springs are designed to support constant accessory loads installed permanently in your MU-X, not variable towing loads. While properly rated springs will provide a more stable foundation for towing compared to worn factory springs, coil springs alone cannot adjust for the dynamic weight of a caravan or trailer. For regular towing, we strongly recommend complementing these springs with airbag suspension, which provides adjustable support to level your vehicle under varying tow ball loads and prevents excessive squat. The springs should be selected based only on your permanent rear accessories, not your towing requirements.
For most standard installations where you're replacing worn springs or adding modest lift, upgraded control arms are not essential for the rear suspension on the Isuzu MU-X. Factory control arms typically accommodate the geometry changes from properly selected rear springs without issue. However, if you're installing a complete lift kit with significant height increase (50mm+), or if your vehicle already has substantial front lift, upgraded rear control arms may be beneficial to correct pinion angle and maintain optimal driveline geometry. Our suspension specialists can assess your specific setup and recommend whether control arm upgrades would benefit your particular configuration.
Yes, a full four-wheel alignment is mandatory after installing any suspension components, including rear coil springs. While rear spring replacement has less impact on alignment angles than front suspension modifications, changes in ride height will affect your vehicle's overall geometry, toe settings and potentially thrust angle. Proper alignment ensures even tire wear, predictable handling characteristics and safe vehicle dynamics. Book your alignment with a qualified suspension or alignment specialist who has experience with lifted or modified 4WD vehicles to ensure all settings are optimized for your new suspension configuration.
Select your spring rate based exclusively on your vehicle's constant accessory load — the total weight of permanently installed accessories carried at all times. Calculate the combined weight of fixed rear accessories such as dual batteries, storage drawers, fridge slides, water tanks, canopies and rear bar upgrades. Do not include occasional loads like camping gear, passengers or towing weight, as selecting too heavy a spring rate will result in harsh ride quality and potential damage to other suspension components. If you're unsure of your total constant load or which spring rate to choose, contact our team with a list of your installed accessories and we'll recommend the optimal rating for your specific setup.
Tyre fitment depends on your total suspension lift (front and rear combined), wheel offset, and whether you install aftermarket upper control arms or other modification to increase clearance. These rear springs alone will provide modest lift or height restoration, which may allow slightly larger tyres than factory but won't dramatically change your tyre clearance. For the 2021+ Isuzu MU-X, a complete balanced lift kit typically allows 32-33 inch tyres without significant trimming. Rear spring selection primarily affects rear squat under load and ride height rather than maximum tyre size. For advice on tyre sizing with your specific suspension setup, consult with our team who can assess your complete vehicle configuration.
Toughdog coil springs are backed by the manufacturer's comprehensive warranty against defects in materials and workmanship, providing peace of mind for your investment. Warranty terms cover manufacturing faults but do not cover damage from incorrect installation, improper spring rate selection, accident damage or modifications. To maintain warranty coverage, springs must be installed by a qualified technician and used within their designed load specifications. Always retain your proof of purchase and installation records. For specific warranty duration and terms, refer to the Toughdog warranty documentation included with your springs or contact our team for detailed warranty information.
Absolutely — when correctly matched to your constant accessory load, these Toughdog rear springs deliver excellent ride comfort for daily commuting and long-distance highway touring. Toughdog engineers their springs with progressive rate designs that balance load-carrying capability with on-road comfort, avoiding the harsh ride associated with over-sprung setups. During the initial 500km break-in period you may notice the ride is slightly firm as the springs settle, but they will achieve their optimal comfort characteristics once fully bedded in. Proper spring rate selection is critical — springs matched to your actual constant load will provide comfortable daily driving, stable highway manners and confident handling whether you're empty or loaded with touring gear.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
