The Toughdog Rear Coil Springs for Toyota Prado 250 Series deliver premium ride quality and load-carrying capability engineered specifically for Australian conditions. Designed to integrate seamlessly with the latest Prado platform, these heavy-duty coil springs offer multiple load ratings to match your constant accessory weight—from canopies and drawers to bullbars and roof racks. Backed by Toughdog's proven Australian testing and full manufacturer warranty, with fast dispatch from our Australian warehouse.
Browse all compatible suspension parts for your Rear Coil Springs Suits - Toyota using our parts finder.
| Make | Model | Series | Years | Position |
|---|---|---|---|---|
| Toyota | Prado | 250 Series | 2024-ON | Rear Axle |
Not sure if this fits your vehicle? Use our parts finder for all Prado suspension components or contact our suspension experts for personalised advice.
Selecting the correct spring rate is critical for achieving the right balance between ride quality and load capacity. You should choose a spring rate based on your constant accessory load—the weight that is permanently installed on your Prado, not occasional loads like camping gear or passengers. Common constant rear loads include canopies, drawer systems, dual battery setups, long-range fuel tanks, rear bars, and heavy-duty spare wheel carriers. Occasional loads such as camping equipment, firewood, water jerry cans, and towing (which transfers weight via the tow ball) should not be included in your spring rate calculation. Selecting an excessively heavy spring rate will result in a harsh, uncomfortable ride and may cause premature wear to other suspension components, while under-specifying will lead to sagging and reduced handling performance.
Professional installation by a qualified mechanic or experienced DIY installer is recommended for this rear coil spring upgrade. A wheel alignment is mandatory after installation to ensure correct steering geometry and prevent premature tyre wear. Allow a 500km break-in period for the springs to settle—ride height may drop slightly during this time as the spring coating beds in and the suspension compresses under normal use. For vehicles with significant lift or heavy constant loads, consider pairing these springs with upgraded control arms to restore factory suspension geometry and maintain optimal handling characteristics.
Toughdog is Australia's most trusted 4WD suspension brand, with decades of proven performance on outback tracks, construction sites and family touring adventures. Every component is designed and tested in Australian conditions—from Cape York corrugations to the Simpson Desert—ensuring durability and reliability when you need it most. Backed by comprehensive manufacturer warranty and chosen by professional tradespeople, grey nomads and weekend tourers nationwide, the full Toughdog suspension range delivers exceptional value without compromising on quality or performance.
These Toughdog rear coil springs are perfect for Prado 250 Series owners who have added constant accessories and need to restore rear ride height and improve load-carrying capability. Ideal for tradespeople running canopies and tool storage, touring families with drawer systems and dual batteries, and caravan or camper trailer towers seeking improved rear-end stability and reduced squat. If you regularly carry heavy or variable loads, consider pairing these springs with airbag suspension for on-demand adjustability and maximum versatility across different load scenarios.
Upgrade your Toyota Prado 250 Series with genuine Toughdog engineering—Australian stock, expert technical support, and fast dispatch Australia-wide. Whether you're building a tourer, upgrading a work vehicle, or simply restoring your Prado's stance, browse our full lift kit range and suspension components to create the perfect setup for your needs. Order today and experience the Toughdog difference.
Yes, these Toughdog rear coil springs are specifically engineered for the Toyota Prado 250 Series (2024-onwards). They are designed to fit the rear axle of all 250 Series Prado variants, including both petrol and diesel models. The springs use the factory mounting points and work with existing spring isolators and hardware. If you have a different Prado generation (such as 150 or 120 Series), you will need a different spring part number—contact us to confirm the correct fitment for your specific vehicle.
The amount of lift provided depends on the spring rate you select and your current constant accessory load. These Toughdog rear springs are primarily designed to restore or maintain factory ride height when accessories are added, rather than provide significant lift. If your Prado has sagged due to canopy, drawer or bullbar weight, the correct spring rate will bring the rear back to level or slightly above factory height. For more significant lift (30-50mm), you would need to select a higher spring rate or consider a complete lift kit with matched front and rear components.
This kit includes a pair (2 pieces) of Toughdog heavy-duty rear coil springs specifically designed for the Toyota Prado 250 Series. The springs feature progressive rate design, heat-treated alloy steel construction and powder-coated corrosion protection. The kit uses your existing factory spring isolators, seats and mounting hardware—no additional components are included. Front springs, shock absorbers, U-bolts and other suspension components are sold separately and can be purchased to create a complete suspension upgrade package.
Yes, these Toughdog rear coil springs are excellent for towing applications when the correct spring rate is selected. They reduce rear-end squat, improve stability under tow ball load, and help maintain a level stance when towing caravans, camper trailers or boat trailers. However, tow ball weight should not be included when selecting your spring rate—choose based on constant accessories only. For maximum towing versatility and the ability to adjust for different trailer weights, consider adding airbag suspension which works in conjunction with your coil springs to provide on-demand load support.
Control arm upgrades are not mandatory when installing these rear coil springs if you are maintaining close to factory ride height. However, if you are installing higher-rate springs that provide significant lift (40mm+), or combining these with a front lift kit, upgraded control arms are highly recommended. Aftermarket control arms restore correct suspension geometry, improve wheel articulation, prevent premature bushing wear, and maintain optimal handling characteristics. They are particularly important for vehicles used in serious off-road conditions or carrying constant heavy loads.
Yes, a full four-wheel alignment is mandatory after installing new rear coil springs. Changing rear spring height affects the vehicle's overall geometry, thrust angle and load distribution, which can impact steering feel, tyre wear and handling balance. Even if the rear axle itself has limited adjustability, the alignment ensures your front wheels are correctly set relative to the new rear ride height. Professional alignment should be performed after the springs have settled (ideally after 500km of driving) to ensure accurate long-term geometry settings.
You should select one spring rate that matches your permanent constant accessory load—the weight that is always installed on your Prado. Different spring rates are available to accommodate various constant load scenarios, from minimal accessories (light spring rate) to heavy permanent fitments like steel canopies and drawer systems (heavy spring rate). You cannot mix different spring rates on left and right sides, as this will cause the vehicle to sit unevenly. If your load varies significantly, consider supplementing your springs with airbag suspension, which allows on-demand adjustment without changing spring rates.
These rear coil springs primarily restore or maintain ride height when accessories are added, rather than provide significant lift for larger tyres. Tyre clearance depends on your total suspension lift (front and rear combined), wheel offset, and guard trimming. If you want to fit larger tyres (265/70R17 or bigger), you will typically need a complete lift kit that raises both front and rear suspension by 30-50mm, possibly combined with guard trimming or aftermarket flares. The Toughdog rear springs can be part of a complete lift package—contact us to discuss your tyre size goals and required suspension modifications.
Toughdog rear coil springs are backed by a comprehensive manufacturer warranty that covers defects in materials and workmanship under normal use conditions. The warranty period and specific terms are provided with your purchase and vary depending on application and usage type. Toughdog is one of Australia's most established suspension brands with decades of proven reliability, and warranty claims are processed through our support team. The warranty does not cover damage from incorrect installation, overloading beyond rated capacity, accident damage, or wear and tear from normal use. Keep your proof of purchase and installation records for warranty validation.
Absolutely—Toughdog rear coil springs are engineered to deliver excellent on-road comfort and handling for daily driving, highway touring and urban commuting. The progressive spring rate design provides a plush, controlled ride when unladen, while maintaining stability and preventing harshness under load. Unlike some budget springs that compromise ride quality for load capacity, Toughdog springs are carefully tuned to balance comfort with capability. When matched to your actual constant load (not overspecified), these springs will deliver a ride quality very close to factory, with improved stability, reduced body roll and better load-carrying performance for long-distance touring and everyday use.
Perfect Upgrade for Our Loaded Prado
Just fitted these Toughdog rear coils to our 250 Prado before our Easter camping trip and the difference is night and day. Previously the rear end would sag pretty badly with the rooftop tent, fridge and all the family gear loaded up, but now it sits level and handles so much better on corrugated roads. Really impressed with the ride quality too – still comfortable for the kids in the back but none of that wallowing feeling we had with the stock springs.(5)
Perfect Upgrade for Our Loaded Prado
These Toughdog rear coils have transformed how our 250 Prado handles when we load up the kids and camping gear for weekend trips. The ride quality is noticeably smoother on corrugated tracks, and we're no longer sitting with the rear sagging under load. Really impressed with the quality for the price point, and fitment was spot on.(5)
Perfect Upgrade for Our Loaded Prado
These Toughdog rear coils have completely transformed how our 250 Prado handles when we're loaded up for weekend camping trips with the family. Previously the rear end would sag terribly with our camper trailer hitched up, but now it sits level and the ride quality is actually better than stock. Fitment was spot-on and they've handled everything from beach sand to rough fire trails without any issues. Couldn't be happier with the investment.(5)
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
