The Toughdog Rear Foam Cell Shocks for Mitsubishi Triton MV deliver Australia's most trusted shock absorber technology with nitrogen-charged foam cell construction for fade-free performance across outback corrugations, highway towing, and loaded work conditions. Engineered specifically for the Triton MV platform and tested in harsh Australian conditions, these premium shock absorbers provide superior ride comfort, increased load capacity, and exceptional durability. Backed by Toughdog's comprehensive warranty and in stock now for fast Australia-wide dispatch.
Browse all compatible suspension parts for your Rear Foam Cell Shocks - Suits using our parts finder.
| Make | Model | Series | Years | Position |
|---|---|---|---|---|
| Mitsubishi | Triton | MV | 2024-ON | Rear Axle |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page for detailed compatibility information and technical specifications.
When upgrading your Triton MV suspension, selecting the correct spring rate based on your constant load is critical for optimal performance and component longevity. Constant load refers to accessories and equipment permanently installed on your vehicle, not occasional loads like camping gear or towing. Common rear constant loads include aluminium or steel tray backs, canopies, drawer systems, dual battery setups, long-range fuel tanks, and permanently mounted roof racks. Occasional loads such as camping equipment, tools, caravan towing, or passenger loads should not be factored into spring rate selection as this will result in an overly firm ride and potential premature wear of suspension components when running unloaded.
Professional installation by a qualified mechanic or experienced DIY installer with appropriate equipment is recommended for these rear shock absorbers. While shock replacement is less complex than complete lift kit installation, proper torque specifications and safety procedures must be followed. A full four-wheel alignment is mandatory after installation to ensure correct suspension geometry and tire wear patterns. Allow a 500km break-in period for the foam cell damping to fully settle and achieve optimal performance characteristics. When installing as part of a complete suspension upgrade, consider pairing with upgraded control arms and bushings for maximum performance and vehicle control.
Toughdog has earned its reputation as Australia's number one suspension brand through decades of engineering excellence, real-world outback testing, and unwavering commitment to quality. Every Toughdog component is developed specifically for Australian conditions and proven across our harshest terrain by tourers, tradespeople, and 4WD enthusiasts who demand reliability when it matters most. Backed by comprehensive warranty coverage and trusted by thousands of Australian 4WD owners, the full Toughdog suspension range represents the perfect balance of performance, durability, and value for your Mitsubishi Triton investment.
These Toughdog rear foam cell shocks are ideal for Triton MV owners who demand more from their suspension than basic OEM replacements can deliver. Whether you're a tradesperson carrying constant work equipment loads, a touring enthusiast tackling remote tracks with camping gear, or a caravan tower requiring enhanced load control and stability, these shocks deliver the performance you need. For maximum load-carrying versatility and on-demand adjustment, consider supplementing your upgraded shocks with airbag suspension for complete rear axle control across all load conditions.
Upgrade your Mitsubishi Triton MV with confidence — genuine Toughdog quality, Australian stock ready for immediate dispatch, and expert technical support when you need it. Whether you're building a complete suspension system or replacing worn components, we stock everything you need including all suspension parts for the Mitsubishi Triton. Order today for fast Australia-wide delivery and experience the Toughdog difference on your next adventure.
These Toughdog rear foam cell shocks are specifically engineered for the Mitsubishi Triton MV series (2024-onwards). They are designed as direct bolt-in replacements for the rear axle position with vehicle-specific valving and mounting geometry. If you own an earlier Triton model such as MR, MQ, or ML, you will require different part numbers specific to those chassis. We recommend confirming your exact model series and year before ordering, and our technical team is available to verify fitment for your specific vehicle configuration.
You'll experience significantly improved ride quality compared to worn or standard OEM shocks, with better control over corrugations, reduced body roll during cornering, and enhanced stability when towing or carrying rear loads. The foam cell technology eliminates shock fade during extended off-road driving, maintaining consistent damping performance regardless of temperature or terrain conditions. On-road comfort improves with reduced harshness over bumps, while off-road capability increases with better wheel control and traction. Load-carrying capability is substantially enhanced with the shocks maintaining proper suspension geometry even under heavy accessory or towing loads.
Yes, these Toughdog rear foam cell shocks are designed to work perfectly with both factory standard springs and upgraded aftermarket leaf springs. They will provide immediate performance improvements over worn factory shocks even when paired with standard springs. However, for maximum performance benefits, especially if you're carrying constant loads or have installed accessories, we recommend considering upgraded leaf springs matched to your load requirements. The combination of quality shocks and correctly rated springs delivers the best possible ride quality, load capacity, and suspension longevity for your specific usage requirements.
Absolutely — these Toughdog foam cell shocks are excellent for towing applications, providing enhanced stability, reduced sway, and better control when towing caravans, camper trailers, or work trailers. The progressive damping characteristics automatically firm up under the increased compression loads experienced during towing, maintaining proper suspension geometry and vehicle control. The fade-resistant foam cell design ensures consistent performance even during extended highway towing in hot conditions. For ultimate towing performance and the ability to level your vehicle under varying tongue weights, consider supplementing these shocks with airbag suspension for on-demand load adjustment and support.
While these shocks can be installed as standalone upgrades and will deliver immediate performance benefits, a comprehensive suspension assessment is worthwhile. Inspect your leaf springs, spring bushings, U-bolts, and shackles for wear — if these components are worn or damaged, replacing them simultaneously will maximize your investment and ensure optimal performance. If you're running a lifted suspension or have increased your vehicle's ride height, upgraded control arms may be necessary to maintain correct suspension geometry and prevent premature component wear. Our technical team can assess your specific vehicle setup and recommend the most appropriate combination of components for your requirements and budget.
Yes, a full four-wheel alignment is mandatory after any suspension component installation, including rear shock absorbers. While rear shocks don't directly affect alignment angles like control arms or springs might, the installation process and settling of new components can shift suspension geometry slightly. Proper alignment ensures even tire wear, optimal handling characteristics, and correct steering feel. The alignment check also allows the technician to inspect all suspension components and identify any worn bushings or components that may need attention. This is a small investment that protects your new shocks and tires while ensuring your Triton handles and drives as intended.
Foam cell shocks contain a special reticulated foam insert within the shock body that separates the oil and nitrogen gas, preventing aeration and cavitation under extreme conditions. This technology maintains consistent damping performance during prolonged corrugation driving, high-speed off-road use, and high-temperature conditions where standard gas shocks can fade and lose effectiveness. Standard monotube or twin-tube gas shocks rely solely on gas pressure to separate oil and gas, which can mix under severe conditions causing temporary performance loss. Foam cell technology delivers superior fade resistance, more consistent damping characteristics across temperature ranges, and longer service life — making them ideal for serious touring, off-road work, and heavy-duty applications where reliability is critical.
No, shock absorbers do not determine vehicle ride height — springs control your vehicle's ride height and load-carrying capacity. These Toughdog rear shocks are designed to work with your existing spring setup, whether factory or aftermarket, and will not alter your current ride height. If you're looking to increase ground clearance or accommodate larger tires, you'll need to upgrade to raised leaf springs or a complete lift kit in addition to quality shocks. The shocks' role is to control spring movement, dampen oscillations, and maintain tire contact with the ground — the springs support the vehicle's weight and determine ride height.
Toughdog backs these foam cell shock absorbers with a comprehensive manufacturer's warranty covering defects in materials and workmanship. The specific warranty period and terms are documented in the warranty card included with your shocks, and Toughdog's Australian-based customer service team provides excellent support should any issues arise. This warranty demonstrates Toughdog's confidence in their engineering and manufacturing quality. To ensure warranty coverage remains valid, shocks must be installed correctly according to manufacturer specifications, used within their designed load parameters, and the vehicle must maintain proper wheel alignment and suspension geometry. Proof of purchase is required for any warranty claims.
These Toughdog foam cell shocks are engineered as versatile all-purpose shocks that excel in both daily road driving and off-road conditions — you don't need to compromise. The velocity-sensitive valving provides comfortable, controlled damping during normal road driving while automatically adapting to provide firmer control when encountering rougher terrain, heavier loads, or aggressive driving. Many Triton owners appreciate that they can drive comfortably to work during the week and confidently tackle challenging off-road tracks on weekends without changing components. The foam cell technology simply ensures consistent performance across all conditions, making them ideal for Australian 4WD owners who use their vehicles as daily drivers and weekend adventure machines.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
