The Toughdog Rear Leaf Springs for Holden Colorado RC 2008-2012 deliver Australia's most trusted heavy-duty suspension upgrade, engineered to handle serious loads without compromising ride comfort. Built from premium multi-leaf steel with corrosion-resistant coating, these heavy-duty leaf springs are specifically tuned for the Colorado platform to improve payload capacity, reduce rear sag, and maintain stability when towing or carrying accessories. Backed by Toughdog's comprehensive warranty and Australian stock for fast dispatch, these springs are the proven choice for tradies, tourers and anyone serious about their Colorado's performance.
Browse all compatible suspension parts for your Rear Leaf Springs Suits - Holden using our parts finder.
| Make | Model | Series | Years | Configuration |
|---|---|---|---|---|
| Holden | Colorado | RC | 2008 - 2012 | All variants (2WD & 4WD) |
Not sure if this fits your vehicle or need help selecting the correct spring rate? Browse all suspension parts for the Holden Colorado RC or check our FAQ page for detailed fitment guidance.
Selecting the correct spring rate is critical for optimal performance and ride quality. Base your selection on the constant load your Colorado carries at all times — this means permanently fitted accessories, not occasional cargo or towing equipment.
Common rear constant load items: Aluminium or steel canopy/hard lid, drawer systems, dual battery setups, auxiliary fuel tanks, rear bar and tow hitch assembly, permanently mounted toolboxes, water tanks, and typical tools or equipment you carry daily. Do not factor in occasional loads such as camping gear, passengers, trailer weight, or supplies you only carry intermittently — choosing too heavy a spring rate will result in harsh ride quality and potential damage to other suspension components.
Professional installation by a qualified 4WD suspension specialist is strongly recommended to ensure correct fitment, torque specifications and safety. While experienced DIY mechanics can perform the installation with appropriate tools and equipment, leaf spring replacement requires proper safety procedures including vehicle support and spring compression techniques. A full four-wheel alignment is mandatory after installation to ensure correct camber, caster and toe settings, preventing premature tyre wear and maintaining handling characteristics. Allow a 500km break-in period for springs to settle and bushes to seat before final ride height assessment — pairing these springs with upgraded control arms can further enhance geometry and articulation.
Toughdog has earned its reputation as Australia's number one suspension brand through decades of engineering excellence, real-world testing in the harshest outback conditions, and unwavering commitment to quality. Every Toughdog component is designed specifically for Australian vehicles and Australian conditions, validated by professional off-road teams, long-distance tourers and hardworking tradies who demand reliability. Backed by comprehensive warranty coverage and supported by a nationwide network of specialist fitment centres, the Toughdog suspension range represents proven performance you can trust for both daily driving and remote touring.
These heavy-duty rear leaf springs are ideal for tradies who need reliable load-carrying capacity for tools and equipment, touring enthusiasts planning long-distance outback adventures with camping gear and recovery equipment, and caravan or camper trailer owners who require consistent rear ride height and towing stability. If you regularly carry heavy or bulky loads, frequently tow within your vehicle's rated capacity, or simply want to eliminate rear sag and improve handling under load, this upgrade delivers measurable real-world benefits. For those carrying variable loads or seeking maximum flexibility, consider combining these springs with airbag suspension systems for on-demand adjustability.
Ready to eliminate rear sag and transform your Holden Colorado RC's load-carrying capability? These Toughdog rear leaf springs are in stock now at our Australian warehouse with fast dispatch Australia-wide. Our suspension specialists are available to help you select the perfect spring rate for your specific setup and answer any technical questions. Explore our complete range of Colorado upgrades or browse our full lift kit selection to build your ultimate touring or work rig with confidence.
Yes, these Toughdog rear leaf springs are specifically engineered for the Holden Colorado RC series produced from 2008 to 2012, fitting both 2WD and 4WD variants. They're designed as direct replacements for the factory rear leaf packs with correct mounting dimensions and eye spacing. The springs work with factory U-bolt spacing and are compatible with both standard and aftermarket rear shackles. If you're unsure about your specific variant or have aftermarket modifications, our technical team can confirm fitment before you order.
These Toughdog rear leaf springs are primarily designed as heavy-duty replacements focused on load capacity rather than significant lift height. Depending on the spring rate selected and your current load configuration, you can expect 0-25mm of additional ride height compared to worn factory springs. The actual lift achieved varies based on the constant load you're carrying — heavier spring rates under lighter loads may provide more lift, while correctly matched springs will primarily restore factory height while dramatically improving load handling. For specific lift requirements, combine these springs with a complete lift kit system.
This kit includes a pair (left and right) of Toughdog heavy-duty rear leaf springs with pre-installed spring eye bushes, centre bolts, and locating pins. The springs come with a durable corrosion-resistant powder coat finish for long-term protection. U-bolts are sold separately as they're vehicle-specific and depend on your axle configuration and any modifications. Shock absorbers are also not included but should be replaced or upgraded at the same time for optimal performance and safety. All necessary hardware for spring-to-spring assembly is included.
Yes, these Toughdog leaf springs are excellent for towing applications as they significantly reduce rear squat and maintain level ride height when towing within your Colorado's rated capacity. The enhanced load capacity helps maintain stability and control with caravans, camper trailers and heavy trailers attached. However, it's critical to select the spring rate based on your constant accessory load (canopy, bars, equipment) — not the trailer weight, as the trailer is an occasional load. For maximum towing flexibility and the ability to adjust for different trailer weights, consider adding airbag suspension to work alongside these springs.
While not strictly mandatory, upgrading your shock absorbers when installing new leaf springs is highly recommended for optimal performance, safety and comfort. Worn shocks cannot properly control the improved spring rates, resulting in poor ride quality, reduced handling and premature spring wear. New heavy-duty or foam cell shocks matched to your spring rate will dramatically improve ride comfort, reduce body roll, control axle movement and maximize the benefits of your spring upgrade. Toughdog offers matched shock absorber options specifically tuned to work with these leaf springs for the Colorado RC platform.
Yes, a full four-wheel alignment is absolutely mandatory after installing new rear leaf springs on your Colorado RC. Even though leaf springs primarily affect ride height rather than suspension geometry angles, any change in rear ride height alters the vehicle's pitch and can affect front-end geometry. A professional alignment ensures correct camber, caster and toe settings across all four wheels, preventing premature and uneven tyre wear, maintaining proper handling characteristics and ensuring your vehicle tracks straight. Most suspension specialists include alignment in their installation service.
Spring rate selection should be based exclusively on your constant accessory load — the weight your vehicle carries permanently, not occasionally. Calculate the combined weight of your canopy or tub lid, drawer systems, rear bar, dual batteries, auxiliary fuel tanks, permanently mounted toolboxes and typical tools you always carry. Do not include camping gear, passengers, towing weight or supplies you only carry occasionally. Selecting a spring rate that's too heavy for your actual constant load will result in a harsh, uncomfortable ride and can stress other suspension components. If you're between ratings, choose the lighter option for better ride quality.
These Toughdog rear leaf springs provide modest lift (0-25mm depending on load and spring rate), which offers minimal additional tyre clearance on its own. For significant tyre size increases, you'll need a complete lift kit that addresses both front and rear ride height as well as suspension geometry. These springs will, however, prevent rear sag when carrying the additional weight of larger, heavier tyres and wheels. If larger tyres are your goal, consider a complete Toughdog lift kit that includes front coil springs or strut spacers along with these rear springs for balanced lift and proper geometry throughout the suspension system.
Toughdog stands behind their products with comprehensive warranty coverage that reflects their confidence in manufacturing quality and durability. Specific warranty terms vary by component and application, but Toughdog leaf springs typically carry extensive coverage against manufacturing defects and premature failure. Warranty terms apply when products are installed by qualified professionals according to manufacturer specifications and used within normal operating parameters. For detailed warranty information specific to this product, contact our team or refer to the warranty documentation included with your springs. Warranty claims are supported through Toughdog's Australian network.
Yes, when correctly matched to your constant load, these Toughdog leaf springs maintain excellent ride comfort for daily driving while delivering superior load-carrying capability. Toughdog's progressive multi-leaf design provides a comfortable unladen ride that firms up progressively as load increases, unlike some cheaper springs that are harsh when empty. The key to comfort is selecting the appropriate spring rate — if you choose a rating too heavy for your actual constant load, the ride will be firm and uncomfortable. Correctly specified springs paired with quality shock absorbers deliver a balanced ride that's comfortable empty, controlled under load, and capable off-road.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
