The Toughdog Rear Shock Absorbers for Mitsubishi Triton MK (1996-2006) deliver Australia's most trusted heavy-duty shock absorber technology, engineered to handle tough outback conditions, heavy loads and daily driving with improved ride comfort and control. Featuring foam cell damping technology and corrosion-resistant construction, this pair is designed specifically for the MK Triton platform with precise valving to restore or enhance your 4WD's handling, stability and off-road capability. Backed by Toughdog's Australian warranty, expert support and fast dispatch from local stock.
Browse all compatible suspension parts for your Rear Shock Absorbers - Suits Mitsubishi using our parts finder.
| Make | Model | Series | Years | Position |
|---|---|---|---|---|
| Mitsubishi | Triton | MK | 1996-2006 | Rear |
This shock absorber pair suits both 2WD and 4WD Mitsubishi Triton MK models across all cab configurations (single, club, dual cab). Not sure if this fits your specific variant? Contact our suspension experts or check our FAQ page for detailed fitment assistance. You can also explore all suspension parts for the Mitsubishi Triton using our parts finder.
When upgrading your Triton MK's rear shocks, consider whether you also need upgraded rear leaf springs to match your typical load requirements. If you regularly carry heavy loads such as a steel tray, toolboxes, camping gear, water tanks, dual spare wheels, or tow caravans and trailers, you may benefit from constant load or heavy-duty leaf springs. Common rear accessories that affect spring selection include canopies, drawer systems, roof racks with rooftop tents, long-range fuel tanks, and aftermarket bullbars that increase overall vehicle weight.
Professional installation by a qualified mechanic or experienced DIY installer with appropriate equipment is recommended for these rear shock absorbers. While rear shock replacement is generally more straightforward than front suspension work, proper tools including spring compressors (if springs are being replaced simultaneously) and jack stands are essential. A full four-wheel alignment is not always mandatory when replacing rear shocks only, but should be checked if you're also upgrading springs or experiencing handling issues. Allow a 500km break-in period for the foam cell technology to settle and achieve optimal damping performance. For vehicles with significant lift or heavy constant loads, consider pairing these shocks with upgraded suspension components such as extended brake lines, differential breathers and bump stop extensions.
Toughdog has earned its reputation as Australia's number one suspension brand through decades of real-world testing across the country's most demanding conditions, from corrugated outback tracks to coastal saltwater environments. Every Toughdog shock absorber and suspension component is engineered with input from Australian 4WD enthusiasts, mining professionals and touring families who depend on reliable performance when it matters most. Backed by comprehensive warranty coverage and supported by expert technical advice, the full Toughdog suspension range represents proven value and performance you can trust whether you're commuting daily, towing your caravan across the Nullarbor, or tackling remote bush tracks.
These Toughdog rear shock absorbers are ideal for Mitsubishi Triton MK owners who need reliable damping performance for daily driving, weekend touring, frequent towing, or trade use with heavy equipment and tools. If you're a caravan or camper trailer tower, consider combining these shocks with airbag suspension for adjustable load support that keeps your vehicle level and improves braking stability. They're equally suited to weekend adventurers who need confidence on corrugated dirt roads, tradespeople carrying constant loads, and families touring remote Australia who can't afford suspension failure far from help.
Upgrade your Mitsubishi Triton MK with confidence knowing these Toughdog rear shock absorbers are in stock, ready for fast dispatch Australia-wide with expert technical support available to ensure you get the right setup for your needs. Whether you're replacing worn factory shocks or upgrading for better performance, we stock the complete range of Triton suspension components. Need a complete suspension overhaul? Browse our full lift kit range to find matched shock and spring packages for your MK Triton.
Yes, these Toughdog rear shock absorbers are specifically engineered for the Mitsubishi Triton MK series manufactured between 1996 and 2006. They suit all MK variants including 2WD and 4WD models across single cab, club cab and dual cab configurations. The shocks are designed as direct OE replacements using factory mounting points with no modifications required. If you have aftermarket modifications such as significant lift kits or body modifications, please contact our team to confirm fitment for your specific setup.
These Toughdog rear shock absorbers are designed as direct replacement dampers and do not provide any additional lift height on their own. Vehicle lift is determined by your spring selection, not the shock absorbers. However, these shocks feature extended travel capability to accommodate lifted rear springs up to approximately 50mm over standard height. If you're looking to increase your Triton's ride height, you'll need to upgrade to heavy-duty or raised leaf springs, which these shocks are designed to complement perfectly. The extended damping range ensures optimal control whether you're running standard height or a modest lift.
This kit includes two complete Toughdog foam cell rear shock absorbers with all necessary mounting bushings and hardware pre-installed for immediate fitment. Each shock features heavy-duty dust boots, corrosion-resistant chrome-plated piston rods, and reinforced mounting eyes. You'll also receive installation instructions, fitment specifications, and full warranty documentation. The shocks arrive ready to bolt into your Mitsubishi Triton MK's factory rear mounting points. Additional components such as leaf springs, U-bolts, or extended brake lines are sold separately and may be required depending on your specific suspension upgrade goals.
Absolutely, these Toughdog rear shock absorbers are designed to handle the increased demands of towing caravans, camper trailers, boats and heavy equipment. The foam cell technology and heavy-duty valving provide superior damping control to reduce rear squat, improve braking stability and minimize trailer sway. For optimal towing performance, especially with heavier caravans over 2,000kg, we recommend pairing these shocks with upgraded constant load or heavy-duty rear leaf springs and potentially an airbag suspension system. This combination allows you to adjust for varying loads while maintaining safe, controlled handling whether towing or driving unladen.
No, control arm upgrades are not required when installing these rear shock absorbers on your Mitsubishi Triton MK, as the rear suspension uses a leaf spring setup rather than coil springs and control arms. However, if you're planning a comprehensive suspension upgrade that includes significant lift, you may want to inspect other rear suspension components such as shackles, bushings, U-bolts and hangers for wear or corrosion. If your Triton has covered high kilometres or operated in harsh conditions, replacing worn rear suspension bushings at the same time as your shocks will maximize performance and longevity of your new Toughdog dampers.
A full four-wheel alignment is not strictly mandatory when replacing only rear shock absorbers on the Mitsubishi Triton MK, as rear axle alignment is generally fixed by the leaf spring setup and cannot be adjusted like front suspension. However, if you're simultaneously replacing rear springs, upgrading to a lift kit, or if your vehicle has been experiencing handling issues, uneven tyre wear or pulling to one side, a four-wheel alignment check is highly recommended. At minimum, have your front wheel alignment checked and adjusted to ensure optimal handling, tyre life and safety. Most suspension shops will recommend an alignment check as part of any suspension component replacement.
These Toughdog rear shock absorbers come with pre-set valving specifically engineered for the Mitsubishi Triton MK platform to provide the optimal balance between comfort, control and load-carrying capability. Unlike adjustable shocks such as remote reservoir or piggyback designs, these foam cell shocks feature fixed valving that suits most applications from daily driving to moderate touring and towing. If you have very specific requirements such as extreme off-road competition use or constant heavy loads exceeding 500kg, contact our suspension experts to discuss whether alternative shock options or custom valving might better suit your needs, though this fixed-valve design handles 90% of typical Triton MK applications perfectly.
These rear shock absorbers alone do not provide additional clearance for larger tyres, as tyre fitment is primarily determined by your vehicle's ride height (controlled by springs), wheel offset, and body/chassis clearances. However, the extended travel range of these Toughdog shocks means they're compatible with lifted suspensions that do accommodate larger tyres up to approximately 31-32 inches. If you're planning to fit larger tyres to your Triton MK, you'll need to upgrade your leaf springs for additional lift, and potentially modify wheel arches or fit wheel spacers depending on your wheel and tyre combination. These shocks will then provide the damping control needed to handle the increased unsprung weight of larger tyres.
These Toughdog rear shock absorbers are covered by the manufacturer's comprehensive warranty against defects in materials and workmanship under normal use conditions. Toughdog typically offers extensive warranty coverage that demonstrates their confidence in the quality and durability of their products, though specific terms vary by component type and application. Warranty coverage requires proof of purchase and professional installation (or equivalent demonstrated competency for DIY installers), and excludes damage from accidents, modifications, misuse or lack of maintenance. For full warranty terms, conditions and duration specific to this product, please refer to the documentation included with your shocks or contact our customer service team before purchase.
Yes, these Toughdog rear shock absorbers are excellent for daily driving and provide a noticeable improvement in ride quality, handling and control compared to worn factory shocks. The foam cell technology delivers a comfortable, controlled ride on sealed roads while maintaining the capability to handle corrugations, potholes and off-road conditions on weekends. Unlike some heavy-duty suspension setups that sacrifice on-road comfort for extreme off-road capability, Toughdog engineers their shocks to provide an ideal balance that suits the typical Australian 4WD owner who drives on-road most of the time but needs genuine off-road performance when heading bush. You'll experience reduced body roll, improved braking stability and better load control without the harsh ride of competition-spec suspension.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
