The Toughdog Suspension Lift Kit for Nissan D22 Navara delivers Australia's most trusted 4WD upgrade with heavy-duty front torsion bars, raised rear leaf springs, and matched foam cell shock absorbers engineered specifically for the D22 platform. This complete 4WD lift kit transforms your Navara's load-carrying capability, ground clearance, and off-road performance while maintaining exceptional on-road ride quality. Backed by Toughdog's Australian engineering heritage and comprehensive warranty, this kit includes all bushes, U-bolts, and hardware for a complete bolt-on installation with fast Australia-wide dispatch from local stock.
Browse all compatible suspension parts for your Nissan D22 Navara using our parts finder.
| Make | Model | Series | Years | Configuration |
|---|---|---|---|---|
| Nissan | Navara | D22 | 1997-2015 | Single Cab, King Cab, Dual Cab (check spring rates) |
Not sure if this fits your vehicle or which spring rate to choose? Contact our suspension experts for personalised fitment advice or browse all suspension parts for the Nissan Navara using our parts finder tool.
Selecting the correct front and rear spring rates is critical to achieving optimal ride quality and component longevity. When ordering, choose spring rates based only on your constant accessory load — the weight permanently fitted to your vehicle every day. Do not select heavier spring rates for occasional loads such as camping gear, passengers, or towing, as this will result in an overly stiff ride and accelerated wear on bushings and shocks when driving unladen.
Common Front Constant Loads: Bull bar, winch, long range fuel tank, heavy-duty battery system, UHF radio, driving lights. Common Rear Constant Loads: Steel tray or canopy, dual battery system, drawer systems, rear bar, water tanks, tool boxes, roof racks with permanent equipment. Accurately weigh your constant accessories or consult our team to select the appropriate spring rate for your specific D22 Navara configuration.
This Toughdog lift kit requires professional installation or experienced DIY mechanical ability with appropriate tools including spring compressors, torque wrench, and torsion bar removal tools. A full four-wheel alignment is mandatory after installation to ensure correct camber, caster and toe settings, preventing premature tyre wear and maintaining steering stability. All suspension components require a 500km break-in period for springs to settle and bushings to seat correctly — expect ride height to settle 5-10mm during this period.
Depending on your final lift height and intended use, consider pairing this kit with upgraded control arms to correct front-end geometry, extended brake lines for adequate flex, and a diff drop kit to maintain CV axle angles within factory specifications, particularly important when running maximum torsion bar preload.
Toughdog has earned its reputation as Australia's number one 4WD suspension brand through decades of real-world testing in the harshest outback conditions, from corrugated desert tracks to Cape York's muddy ruts. Every Toughdog kit is engineered specifically for Australian vehicles and conditions, backed by comprehensive warranty coverage and trusted by professional tourers, tradies, and mining operations across the country. Explore the complete Toughdog suspension range to discover matched upgrades including steering dampers, suspension components, and specialty applications.
This complete suspension system is ideal for Nissan D22 Navara owners who regularly carry heavy accessories, tow caravans or trailers, require additional ground clearance for touring and off-road adventures, or want to fit larger all-terrain tyres while maintaining excellent ride quality. Tradies running constant tool loads, grey nomads towing vans around Australia, and serious 4WD tourers will all benefit from the improved capability and comfort this kit delivers. For ultimate load leveling when towing heavy caravans, consider adding airbag suspension to the rear for on-demand height and load support adjustment.
This Toughdog Nissan D22 Navara lift kit is in stock now at our Australian warehouse with fast dispatch Australia-wide. Our experienced suspension specialists are available to answer technical questions, confirm fitment for your specific vehicle configuration, and recommend complementary upgrades to maximize your D22's performance. Browse our complete 4WD lift kits range or contact us today to transform your Navara's capability and comfort.
This kit is designed to fit Nissan D22 Navara models from 1997 to 2015 including Single Cab, King Cab, and Dual Cab configurations. However, spring rate selection varies depending on your specific cab type and constant accessory load. We strongly recommend confirming your vehicle's exact year, cab style, and current accessory weight with our team before ordering to ensure you receive the correct spring rates. Contact us with your VIN or vehicle details for personalised fitment confirmation.
This complete suspension kit typically provides approximately 40-50mm of lift at both front and rear, though exact height varies based on spring rate selection, vehicle variant, and constant load carried. The front lift is achieved through heavy-duty torsion bars with increased spring rate and adjustability, while the rear uses raised leaf spring packs. Final ride height settles after a 500km break-in period as springs compress and bushings seat. Lift height can be fine-tuned through torsion bar adjustment to accommodate different front accessory loads.
This complete kit includes front and rear foam cell shock absorbers, heavy-duty front torsion bars, raised rear leaf spring assemblies, complete rear spring bush sets, rear U-bolts with hardware, and all necessary mounting components. Everything required for a complete suspension upgrade is included except for items that may be vehicle-specific such as extended brake lines, upper control arms, or diff drop kits. You'll select your preferred front and rear spring rates during checkout based on your D22's constant accessory load.
Yes, this kit significantly improves towing performance with increased rear spring rates and matched shock valving designed to reduce squat and maintain stability when towing heavy loads. The raised leaf springs provide superior load-carrying capacity compared to factory suspension, while the foam cell shocks deliver consistent damping even under the heat and stress of long-distance towing. For maximum towing performance and adjustability, many D22 owners pair this kit with supplementary airbag suspension for on-demand load leveling. Always select rear spring rates appropriate for your constant payload, not occasional towing weight.
Upper control arm upgrades are not always mandatory but are highly recommended depending on your final lift height and intended use. Aftermarket extended upper control arms correct front-end geometry, restore optimal camber and caster angles, and prevent premature ball joint and bushing wear that can occur with factory arms at lifted heights. If you're running maximum torsion bar preload, planning aggressive off-road use, or want to maximize suspension articulation, upgraded control arms should be considered an essential complement to this kit. Our team can recommend the best control arm solution for your specific D22 configuration.
Yes, a full four-wheel alignment is absolutely mandatory after installing this or any lift kit to ensure correct camber, caster, and toe settings. Lifting your D22 Navara alters suspension geometry and angles, which if left uncorrected will cause rapid and uneven tyre wear, poor steering response, and reduced handling stability. The alignment must be performed after the vehicle has been driven approximately 500km to allow springs to settle and components to seat properly. Always use a suspension-specialist alignment shop familiar with lifted 4WDs rather than a general tyre shop.
Spring rate selection must be based solely on your constant accessory load — the weight permanently installed on your vehicle every single day. Do not select heavier springs for occasional camping gear, passengers, or towing, as this causes harsh ride quality and accelerated component wear when driving unladen. Accurately weigh or calculate your constant front accessories (bull bar, winch, long range tank) and rear accessories (canopy, drawers, dual batteries, rear bar). Our team can help you select appropriate spring rates based on your specific accessory list and D22 cab configuration to achieve optimal ride quality and load capacity balance.
This lift kit provides sufficient clearance for modest tyre size increases, typically allowing 31-32 inch tyres (265/75R16 or similar) with minimal to no rubbing on most D22 variants. Exact tyre clearance depends on your wheel offset, tyre brand (different brands measure differently), driving style, and suspension articulation. Some minor trimming of plastic liner or bump stop modification may be required for maximum tyre sizes. For aggressive tyre sizing or maximum articulation, additional modifications such as diff drops and extended bump stops should be considered. Always test-fit and check clearance at full lock and full compression before committing to wheel and tyre purchases.
Toughdog suspension components are backed by comprehensive manufacturer warranty coverage, reflecting the brand's confidence in Australian engineering and build quality. Specific warranty terms vary by component type — shock absorbers, springs, and hardware each carry different coverage periods. Warranty validity requires professional installation, correct spring rate selection for vehicle load, mandatory wheel alignment, and adherence to recommended service intervals. We recommend retaining all installation receipts and alignment records to support any future warranty claims. Contact us for complete warranty terms and conditions specific to this kit.
Absolutely — Toughdog engineers this kit to deliver excellent on-road comfort and highway manners while providing heavy-duty off-road capability. The foam cell shocks and progressive-rate leaf springs maintain composed, controlled ride quality on sealed roads, avoiding the harsh, bouncy ride common with incorrectly specified or budget lift kits. Provided you select spring rates appropriate for your actual constant load (not overspecified for occasional weight), this kit delivers a ride quality suitable for daily commuting, long highway touring, and family transport duties while transforming off-road capability when needed. Thousands of D22 owners across Australia run this exact setup as their daily driver.
Rock Solid Kit for Serious Outback Work
Been running this Toughdog lift kit on my D22 for about 18 months now, covering everything from the Canning Stock Route to the Simpson crossing. The HD torsion bars hold up incredibly well under a fully loaded setup with long-range tanks and roof rack, no sagging whatsoever. Ride quality is firm but controlled—exactly what you want when you're 500km from the nearest town and can't afford a breakdown.(5)
Perfect Upgrade for Our Family Camping Rig
Finally got around to fitting this Toughdog lift kit on our D22 and couldn't be happier with how it's transformed the old girl. We've done three trips up to the High Country since the install, and the ride quality is leagues better than the sagging original setup, even when loaded up with the camper trailer and all the kids' gear. The kit went together perfectly with everything included, and our local mechanic said it was one of the better engineered setups he's seen for the Navara. Well worth the investment for anyone doing regular touring.(5)
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
