Reviewed by Andrew, 4WD Suspension fitment team
Tough Dog rear shock absorbers for the Toyota LandCruiser Prado 120 Series incl. Grande (02/2003-2010), sold per pair. Both options suit up to 40mm of lift. On models with electronic dampers, all four shocks must be replaced at the same time - see the FAQ.
On a Toyota Prado 120 Series the shock absorbers do the hard yards: every corrugation, every pothole, every loaded kilometre goes through them. When they fade, the vehicle floats over undulations and takes longer to settle after each hit.
The price covers both sides – always replace shocks in pairs so damping stays even across the axle. It's also the right time to look over bushes and mounting hardware while everything is apart.
Doing the whole vehicle at once? We also stock the matching front Coil Springs and assembled Front Struts for the Toyota Prado 120 Series.
Match them with Tough Dog rear coil springs.
| Make | Model | Variants | Years |
|---|---|---|---|
| Toyota | LandCruiser Prado 120 Series | LWB, SWB & Grande | 02/2003 - 2010 |
Last updated: 27 August 2026
Genuine Tough Dog suspension from an authorised Australian dealer.
New to Prado and FJ Cruiser suspension? Read our Prado and FJ Cruiser suspension problems guide.
Foam Cell is the all-round choice for touring – the foam insert stops the oil aerating so damping stays consistent on corrugations. Step up to the 9-stage Adjustable if the vehicle swings between unloaded weekdays and loaded trips and you want to tune the damping to match, or to the bigger-bore options if it works hard, hot and heavy most of the time.
The listed price covers both sides – always replace left and right together so the axle is evenly damped and sprung. It's a bolt-in job for a competent home mechanic or any workshop; check bushes, mounts and brake-line slack while everything is apart.
Yes - the electronically controlled dampers on the 120 Series can be replaced with Tough Dog shocks without error indicators appearing, but all FOUR shock absorbers must be replaced at the same time. The electronically-adjustable height control of factory rear airbags is not affected if operating correctly.
Yes - use the TDC975AB / TDC975HAB airbag-conversion springs. The electronic workaround in the supplied instructions prevents error indicators, but it disables the electronic dampening system, so all four electronic dampers must be replaced with Tough Dog shocks at the same time. You also need the genuine Toyota bump-stop coil retainer, part 48302-60080. A 76mm sway bar spacer (TDSP-011, $75) is also available - contact us.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.