The Airbag Man Helper Kit fits Mazda BT50 TF series (2020-On) 4x4 and 4x2 variants, fitting Firestone reinforced airbags between the chassis rail and the rear leaf spring pack to stop sag under load. Adjustable air pressure lets you dial in support from empty to full payload, correcting rear geometry for towing caravans or carrying tool boxes and canopies. It works alongside your factory leaf springs — no spring replacement needed. In stock in Australia with a Firestone lifetime warranty and fitment support from our team.
Browse all compatible suspension parts for your Helper Kit Mazda Bt50 2020-On using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Mazda | BT-50 | TFS40, TFR40 | 2020-On | 3.0L Turbo Diesel |
| Mazda | BT-50 | 4x4 & 4x2 | 2020-2024 | All Variants |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
Because this is an adjustable helper system rather than a fixed leaf spring upgrade, selection comes down to matching air pressure to your typical load rather than picking a spring rate. Two SKU options (RR4727 and RR4730) may apply depending on your BT50's chassis configuration and load profile, so tell our team about your setup before ordering. Common accessories that affect the right pressure range include steel canopies, toolboxes, bullbars, winches, roof racks and long-range fuel tanks, plus towball weight from a caravan or camper trailer.
This is an Easy Fit system with an estimated 120-minute install for an experienced DIYer or a workshop, and it slots in between the leaf spring pack and chassis without removing the springs. No wheel alignment is required from this kit alone because it doesn't alter static ride height, but if you've also fitted a lift kit or raised suspension, an alignment check and upgraded control arms are worth considering to correct geometry. Run the airbags at a low unladen pressure for comfort and increase pressure to suit heavier loads or towing. Give new fittings a check for leaks after the first few hundred kilometres.
Airbag Man has built and supplied air suspension kits for Australian 4WDs and utes for over 25 years, from city tradies' vehicles to outback touring rigs. Every kit uses Firestone air bags, a globally recognised air spring manufacturer, matched to Australian conditions including heat, corrugations and heavy-duty commercial use. You can view the full Airbag Man range of helper kits, full air suspension systems and inflation accessories on our site.
This kit suits BT50 owners who regularly carry tools, equipment or building materials and want to stop rear sag without swapping their leaf springs. It's also a practical option for caravan and camper trailer towers who need adjustable rear support to handle changing towball weight. If your BT50 squats under load or when towing, this airbag suspension kit gives you a way to correct it without a full leaf spring replacement.
This Airbag Man Helper Kit is in stock at 4WD Suspension Australia with fast dispatch and fitment support from our team. Contact us if you need help confirming RR4727 versus RR4730 for your BT50, or browse our full lift kit range if you're planning a raised suspension setup alongside this helper kit.
New to BT-50 suspension? Read our guide to common BT-50 suspension problems and how to fix them.
Yes, this Airbag Man Helper Kit is designed for Mazda BT-50 TFS40 and TFR40 models built 2020-On, covering both 4x4 and 4x2 variants across all engine options. Two SKU options — RR4727 and RR4730 — may apply depending on your specific chassis configuration, so it's worth confirming with our team before you order. We can check your build details against the kit specifications so you get the correct part number the first time. Contact our suspension experts if your BT50 has aftermarket modifications that might affect fitment.
This is a helper airbag kit, not a lift kit, so it doesn't add static lift height on its own. Instead, it uses adjustable air pressure to restore factory ride height and prevent rear sag once you load the tray, canopy or towball. If you're after an actual increase in ride height as well, pair this kit with a dedicated leaf spring upgrade or lift kit from our range. The airbags themselves are compatible with standard, lowered or already-lifted BT50 setups.
The kit includes two Firestone reinforced air bags, upper and lower mounting brackets, a nylon air line kit, two inflation valves and all mounting hardware such as U-bolts, bolts and washers. Step-by-step fitting instructions are supplied via a QR code on the packaging. An air compressor is not included in the base kit but is available separately if you don't already own one. Everything needed to mount the air bags between the chassis rail and leaf spring pack is provided.
Yes, this is a common application for the kit. Towball weight from a caravan, camper trailer or boat trailer pushes down on the rear of a BT50, and the adjustable air bags let you add pressure to counter that load and keep the rear end level. This helps maintain steering response and reduces the nosedive you'd otherwise get under braking with a loaded trailer. You simply deflate the bags again for unladen driving comfort.
Not for this kit specifically, because it doesn't change your BT50's static ride height or suspension travel geometry at rest. If you've also fitted a raised suspension kit or lift kit alongside this helper system, upgraded control arms are worth considering to correct alignment angles at the increased height. For a standard-height BT50 running just this helper kit, your factory control arms are fine. Talk to our team if you're combining this with other suspension upgrades.
Generally no, because this helper kit doesn't alter your BT50's unladen ride height or suspension geometry — it only adds adjustable support under load. If your vehicle is also running a lift kit or has had other suspension changes, it's good practice to have an alignment check done regardless. Otherwise, fitting this airbag kit on its own doesn't trigger a mandatory alignment. Check with your fitter if you're unsure about your specific setup.
This kit doesn't use a fixed spring rate like a leaf spring upgrade — instead you adjust air pressure in the Firestone bags to suit your load, from empty tub through to full payload. Two SKU options, RR4727 and RR4730, may be available depending on chassis configuration rather than load rate, and our team can confirm which one suits your BT50. This gives you more flexibility than a fixed-rate leaf spring, since you can wind pressure up or down as your load changes trip to trip.
Since this is a helper airbag kit rather than a lift kit, it doesn't raise your BT50's static ride height, so it won't change tyre clearance on its own. If you're planning larger tyres, that's a separate consideration tied to a lift kit or raised leaf springs rather than this helper system. This airbag kit can be run alongside a lift kit if you do go that route, since it's compatible with raised suspension setups. Speak to our team about tyre fitment if you're combining both upgrades.
The Firestone air bags in this kit are covered by Firestone's manufacturer lifetime warranty, which is one of the stronger warranty terms available on air suspension components in Australia. This covers the air bags themselves against manufacturing defects for as long as they're fitted to the vehicle they were installed on. Mounting hardware and air line fittings are covered under standard supplier terms. Keep your proof of purchase from 4WD Suspension Australia for any warranty claim.
Yes, the adjustable air pressure means you can run the bags at a low setting for comfort during unladen daily driving and increase pressure only when you're carrying tools, equipment or towing. This flexibility is one of the main reasons tradespeople and tourers choose a helper kit over a fixed heavy-duty leaf spring, since you're not stuck with a firm ride when the vehicle is empty. Most owners find a low daily pressure keeps the ride comfortable while still having support on hand when needed.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
