Dobinsons Nitro Gas Twin Tube front shock absorbers for the Nissan Patrol Y62 2010-On — a nitrogen-charged twin tube damper. Dobinsons offer more than one specification for this vehicle — the differences are listed against each option so you can match the damper to your lift height and how the vehicle is loaded. Sold as a matched pair at Dobinsons RRP, in stock in Australia with fitment support from our team.
Browse all compatible suspension parts for your Nissan Patrol Y62 2010-On using our parts finder.
Building a complete Patrol Y62 2010-On suspension upgrade or lift kit? Match these dampers with the Dobinsons springs engineered for the same lift heights: Dobinsons front coil springs for the Patrol Y62 2010-On; Dobinsons rear coil springs for the Patrol Y62 2010-On; Dobinsons Nitro Gas rear shocks for the Patrol Y62 2010-On; Dobinsons IMS rear shocks for the Patrol Y62 2010-On. Every part is load-rated, pair-priced at Dobinsons RRP and dispatched from Australian stock.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Nissan | Patrol | Y62 | 2010 - On | 5.6L V8 Petrol |
Note: Y62 models fitted with factory HBMC (hydraulic body motion control) are NOT compatible with conventional suspension — physically check for hydraulic lines at the dampers before ordering. Ti-L and some Ti variants have HBMC.
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
| Specification | Part Number | Price (pair) |
|---|---|---|
| Standard | GS45-110 | $430.00 |
| Extra Heavy Duty | Valve Force Increased to Suit Heavy Loads | 45mm Piston | 70mm Body for Increased Quantity of Oil and Cooling Capacity | Adjustable Spring Seat | 4mm Wall Thickness | GS45-112 | $640.00 |
Strut-type front dampers are removed with the coil spring as an assembly — a spring compressor and a wheel alignment afterwards are required, so most owners have these fitted by a workshop.
Dobinsons has been designing and manufacturing 4WD suspension in Australia for decades, with springs wound and dampers valved for local loads, corrugations and touring distances rather than adapted from an overseas market spec. Every part is backed by a Dobinsons manufacturer warranty. View the full Dobinsons range to match the rest of your build.
Nissan Patrol Y62 2010-On owners replacing worn factory dampers, matching new dampers to a lift, or upgrading damping for touring and towing. Pair them with the matching rear dampers so both axles behave the same.
New to Patrol Y62 suspension? Read our guide to common Patrol Y62 suspension problems and how to fix them.
Yes — these Dobinsons Nitro Gas Twin Tube front dampers suit the Nissan Patrol Y62 2010-On and replace the factory units directly. Y62 models fitted with factory HBMC (hydraulic body motion control) are NOT compatible with conventional suspension — physically check for hydraulic lines at the dampers before ordering. Ti-L and some Ti variants have HBMC.
Nitro Gas is Dobinsons' nitrogen-charged twin tube damper — the value option for daily driving and light touring, valved in Australia for local loads and corrugations.
Each option lists what Dobinsons specify for it — match the damper to your lift height and the weight the vehicle carries. Our team can confirm the right one for your build.
A matched pair (2 x) of Dobinsons front shock absorbers. Coil springs and fitting hardware are sold separately.
Yes — on strut-front vehicles the alignment should always be checked after the struts are out.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.