The Dobinsons Nitro Gas 2" Lift Kit is purpose-built for the Nissan Navara NP300 rear coil platform (2015-ON), pairing twin-tube nitro gas shocks with vehicle-specific coil springs front and rear. Larger bore shocks and increased oil capacity improve heat dissipation and damping control under load, while Japanese NOK seals guard against dust and moisture on Australian tracks. This complete 4WD lift kit raises ride height by a genuine 2" front and rear, opening up clearance for larger tyres and heavier bar work. Dispatched from Australian stock with full manufacturer warranty and fitment support from our team.
Browse all compatible suspension parts for your 2″ Nissan Navara Np300 using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Nissan | Navara | NP300 Rear Coil | 2015-ON | 2.3L & 2.5L Turbo Diesel |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
Choose your rear coil spring rate based on the constant accessory load you carry, not just occasional trips. If you regularly run a canopy, drawer system, dual battery setup, or tow a camper trailer, a firmer rear spring keeps ride height consistent and prevents rear sag. Common accessories that affect spring selection include bull bars, winches, long-range fuel tanks, rooftop tents, and water tanks.
Fitment should be carried out by a qualified suspension technician or an experienced DIY installer with the correct tools for coil spring compression and strut removal. Wheel alignment is mandatory after installation to correct caster and toe settings at the new 2" ride height. Allow a 500km settling period for springs to reach their final rated height and shocks to bed in. If your NP300 sits at height with worn factory geometry, pairing this kit with upgraded control arms corrects arm angles and restores proper suspension travel.
Dobinsons has built suspension components for Australian conditions for decades, with local engineering input rather than a one-size-fits-all import. Every kit is backed by a manufacturer warranty and supported by our team's fitment guidance specific to the NP300 rear coil platform. Browse the full Dobinsons suspension range to see matching front and rear options for other Navara variants.
This kit suits tradespeople carrying tools and equipment daily, tourers fitting drawer systems and rooftop tents, and owners towing camper trailers or small caravans. If your load varies significantly trip to trip, consider pairing this kit with airbag suspension for adjustable load support without changing spring rate.
In stock in Australia and dispatched fast, with fitment support from our suspension specialists. Browse our full lift kit range or get in touch if you need help matching spring rates to your NP300 setup.
New to Navara suspension? Read our guide to common Navara suspension problems and how to fix them.
This kit is built specifically for the Nissan Navara NP300 rear coil platform, model years 2015-ON. It is not designed for the leaf-spring rear variants of the NP300, so confirm your rear suspension type before ordering. If you're unsure which rear setup your Navara has, our team can check your VIN or build plate details against the fitment records. Contact us or use the parts finder for a direct fitment check.
This Dobinsons kit delivers a 2" lift at both the front and rear of the Nissan Navara NP300 rear coil platform. The lift comes from vehicle-specific coil springs matched to twin-tube nitro gas shocks with extended travel to suit. Actual ride height can vary slightly depending on vehicle load and accessories fitted. A 500km settling period is normal before springs reach their final rated height.
Please note that all assembled struts are dispatched at a height based on our experience and the manufacturer’s specifications for the advertised lift. Coil springs and leaf springs are also manufactured according to the advertised height and constant-load rating. Actual vehicle height may vary depending on the vehicle and the weight of fitted accessories. Further adjustment may therefore be required after installation. The installer may use coil spacers or adjust the struts at their discretion to achieve the desired height. We are not responsible for vehicle-specific height variations or any additional adjustments required after installation.
The kit includes 2 front and 2 rear Dobinsons Nitro Gas twin-tube shock absorbers, plus 2 front and 2 rear vehicle-specific coil springs rated for the 2" lift. Mounting hardware for both the shocks and coil springs is included, along with fitting instructions. Upper control arms are not included and are sold separately if your build needs corrected geometry at ride height.
Yes, this kit is a solid option for Navara NP300 owners who tow trailers or camper units, provided the rear spring rate is matched to your typical load. Choosing a firmer rear coil for constant towing weight keeps the rear from sagging under hitch load. If your towing weight varies a lot, pairing this kit with airbag suspension gives you adjustable support on top of the fixed spring rate. Speak with our team about your typical ball weight before ordering.
At a 2" lift height, factory control arms can run at an altered angle that affects camber, caster and CV joint life on the NP300. We recommend pairing this kit with upgraded control arms to restore correct geometry and suspension travel. It's not always mandatory at this lift height, but it does improve long-term component wear and on-road handling. Our team can advise based on your specific NP300 build.
Yes, wheel alignment is mandatory after installing this kit. The new 2" ride height changes caster and toe settings, and correct alignment protects tyre wear and steering feel. We recommend booking an alignment immediately after fitment, then rechecking after the first 500km once the springs have settled. Skipping alignment can cause uneven tyre wear and pulling under braking.
Dobinsons offers vehicle-specific coil springs matched to different constant accessory loads for the NP300 rear coil platform. If you run a canopy, dual battery system, or tow regularly, a firmer rear coil spring keeps ride height consistent under that load. Talk to our team about your typical accessory weight so we can recommend the right spring rate for your build. Getting this right avoids rear sag or an overly firm unladen ride.
The 2" lift on this kit typically creates clearance for a modest tyre size increase over factory-fitted rubber on the NP300. Actual clearance depends on your wheel offset, tyre width, and whether flares or trimming are needed. We recommend confirming your intended tyre size with our team before purchase to avoid rubbing at full steering lock or compression. Fender flares may be needed for wider tyre and wheel combinations.
This Dobinsons Nitro Gas Lift Kit is covered by a full manufacturer warranty against defects in materials and workmanship. Warranty terms apply to both the shock absorbers and coil springs included in the kit. Keep your proof of purchase and installation details on file for any warranty claim. Our team can talk you through the specific warranty process if an issue comes up.
Yes, this kit is designed to balance daily on-road comfort with off-road capability, not just weekend touring performance. The twin-tube nitro gas shocks are tuned to control body movement on bitumen while still handling corrugations and rough tracks. Ride quality stays comfortable for commuting once the springs have settled in over the first 500km. Many NP300 owners run this kit as their everyday setup while towing or touring on weekends.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
