The Dobinsons Nitro Gas 2" Lift Kit for Nissan Pathfinder R51 combines Australian-engineered twin-tube shock technology with premium coil springs to deliver exceptional on-road comfort and serious off-road capability. Featuring vehicle-specific valving, NOK multi-lip seals, and German Fuchs oil, this complete lift kit has been tested in Australia's harshest conditions — from outback corrugations to alpine tracks. Every component is designed for longevity, with increased oil capacity for cooler operation and superior fade resistance under heavy loads. Backed by Dobinsons' 60+ years of suspension engineering excellence, this kit is in stock now with fast Australia-wide delivery and full manufacturer warranty.
Browse all compatible suspension parts for your 2″ Suits - Nidsan Pathfinder R51 using our parts finder.
| Make | Model | Series | Years | Notes |
|---|---|---|---|---|
| Nissan | Pathfinder | R51 | 2005-2013 | All variants including ST, ST-L, Ti, Diesel & Petrol |
Not sure if this fits your vehicle? Use our Nissan Pathfinder parts finder to check compatibility or contact our suspension experts for personalized advice on spring rates and optional upgrades.
Selecting the correct spring rate is critical for achieving proper ride height, handling, and comfort. Dobinsons coil springs are load-rated based on your constant accessory load — the combined weight of accessories fitted to your Pathfinder R51 at all times. This includes bullbars, winches, roof racks, rear bars, dual battery systems, long range fuel tanks, canopies, and permanently mounted drawer systems. Do not include occasional loads such as camping gear, passengers, water, or towing — these are temporary loads. Common front accessories that affect spring selection include steel bullbars (30-60kg), winches (30-50kg), upgraded intercoolers, and heavy-duty batteries. Rear constant loads include rear bars (20-40kg), dual spare wheel carriers (40-60kg), long range tanks (15-30kg when empty), and permanently fitted drawer systems (50-100kg). When ordering, carefully calculate your front and rear constant loads and select the appropriate spring rate — selecting too heavy a spring rate will result in harsh ride quality and potential damage to other suspension components, while too light a spring will sit below target ride height.
This Dobinsons Nitro Gas Lift Kit is a direct bolt-in replacement designed for professional installation or experienced DIY enthusiasts with appropriate equipment including spring compressors, torque wrenches, and safety stands. Installation time is typically 4-6 hours depending on workshop facilities and experience level. Wheel alignment is mandatory after installation to ensure correct castor, camber, and toe settings — failure to align may result in uneven tyre wear and compromised handling. A 500km break-in period is recommended, during which springs will settle 5-10mm as coil windings mate and bushings seat. For Pathfinder R51 models with significant front-end weight (bullbar + winch exceeding 80kg), consider pairing this kit with upgraded control arms to correct castor angle and restore factory steering geometry for improved on-road manners and reduced tyre scrub.
Dobinsons Spring & Suspension has been manufacturing premium 4WD suspension in Australia for over 60 years, exporting to more than 40 countries worldwide from their Australian head office. Every Dobinsons shock absorber undergoes rigorous in-house dyno testing, durability testing exceeding several million cycles at temperatures over 100°C, and real-world validation across Australia's most demanding terrain — from the blistering heat and corrugations of the outback to the subzero conditions of alpine regions. This commitment to Australian engineering and testing means every component is purpose-built to withstand the unique challenges Australian 4WD owners face, whether you're a tradesperson carrying tools daily, a grey nomad towing around the country, or a weekend warrior exploring remote tracks. Dobinsons backs their products with comprehensive warranty coverage and a reputation trusted by generations of Australian tourers. Explore the complete Dobinsons suspension range for complementary upgrades including monotube adjustable shocks, heavy-duty leaf springs, and steering dampers.
This Dobinsons Nitro Gas 2" Lift Kit is ideal for Nissan Pathfinder R51 owners who demand balanced performance across multiple driving conditions. Whether you're a tradesperson carrying constant front-end weight from bullbars and tools, a touring family needing stable highway manners while towing a camper trailer, or an off-road enthusiast seeking improved clearance for beach driving and outback exploration, this kit delivers. The load-rated spring options accommodate everything from lightly accessorized urban vehicles to heavily equipped tourers, while the premium shock absorbers ensure comfort isn't sacrificed for capability. For Pathfinder owners frequently hauling maximum payload or towing at GCM, consider adding airbag suspension to the rear for on-demand load support and perfect load levelling without compromising unladen ride quality.
Ready to transform your Nissan Pathfinder R51's suspension performance? This Dobinsons Nitro Gas Lift Kit is in stock at our Australian warehouse with fast dispatch to all states and territories. Our suspension specialists are available to help you select the correct spring rates for your specific setup and answer any technical questions. Order today with confidence — backed by Dobinsons' reputation for quality, comprehensive warranty coverage, and our commitment to expert customer support. Need more options? Browse our full lift kit range featuring premium brands and configurations for every 4WD application.
This Dobinsons Nitro Gas 2" Lift Kit is specifically engineered for all Nissan Pathfinder R51 models from 2005 to 2013, including ST, ST-L, and Ti variants in both diesel and petrol configurations. The kit is a direct bolt-in replacement for factory suspension components with no modifications required. All mounting points, bushings, and hardware are designed to OEM specifications for hassle-free installation. If you're unsure about your specific variant or have made modifications to your Pathfinder, use our online parts finder or contact our team to confirm compatibility before ordering.
This Dobinsons kit delivers 50mm (2 inches) of lift height over factory ride height when correctly installed with appropriate spring rates for your constant load. Actual lift may vary by 5-10mm depending on accessory weight, with heavier front-end loads (bullbar + winch) potentially reducing front lift slightly. The lift is achieved through raised coil springs and extended-length shock absorbers designed to maintain factory suspension geometry. As this is an aftermarket modification, it may affect certain aspects of your vehicle's new car warranty depending on your manufacturer's policy — we recommend discussing suspension modifications with your dealer if your Pathfinder is still under new vehicle warranty, though many owners install lift kits without issue.
This complete Dobinsons Nitro Gas Lift Kit includes 2 front nitro gas struts with double-chrome rods, 2 front coil springs, 2 rear nitro gas shock absorbers, 2 rear coil springs, and natural rubber bushings for all mounting points. Steel dust covers are included where applicable for additional protection. The kit does NOT include upper control arms, differential drop kits, extended brake lines, or wheel alignment — these may be required depending on your specific vehicle setup and intended use. All shocks feature premium NOK seals, German Fuchs oil, and are pre-assembled where possible for simplified installation.
Yes, this Dobinsons Nitro Gas Lift Kit is excellent for towing applications when paired with correctly selected spring rates. The firmer valving and increased oil capacity provide superior control and reduced body roll when towing caravans, camper trailers, or boats up to your Pathfinder R51's rated towing capacity (typically 2500-2700kg depending on variant). Select rear spring rates based on your constant rear accessories, not including tow ball weight. For ultimate towing performance and the ability to level your vehicle under varying loads, consider adding rear airbags to this kit — airbags allow you to adjust rear ride height and support on-demand without compromising unladen ride quality when not towing.
Upper control arms are not strictly required for a 2" lift on the Pathfinder R51, but they are highly recommended if you're running significant front-end weight (bullbar and winch exceeding 80kg combined). A 50mm lift will alter your castor angle, and while many owners run this kit successfully without control arms, upgraded arms with adjustable castor correction will restore factory steering geometry for improved on-road handling, reduced steering wander, and better tyre wear patterns. If you frequently drive on highways or notice increased steering effort or vague on-center feel after installation, aftermarket control arms are an excellent upgrade to consider adding later.
Yes, professional 4-wheel alignment is absolutely mandatory after installing any lift kit, including this Dobinsons system. Lifting your Pathfinder R51 alters suspension geometry, affecting castor, camber, and toe angles that directly impact handling, steering response, and tyre wear. Alignment should be performed after installation and the initial 500km settling period, as springs will compress 5-10mm as they mate and seat. Most reputable 4WD alignment shops are familiar with lifted Pathfinders and can set appropriate angles for your intended use (touring vs off-road). Failure to align after lifting may result in premature and uneven tyre wear, poor handling characteristics, and potential safety concerns.
Yes, Dobinsons manufactures this kit with multiple spring rate options for both front and rear to accommodate different constant load configurations. When ordering, you'll select spring rates based on your current constant accessory load — the permanent weight of fitted accessories like bullbars, winches, rear bars, spare wheel carriers, and long range tanks. Front and rear loads are often different (for example, heavy bullbar and winch up front, but minimal rear accessories), so selecting appropriate rates for each end ensures correct ride height and optimal handling. Accurately calculate your constant loads before ordering, as selecting too heavy a spring rate will result in harsh ride and potential component stress, while too light a rate will sit below target height.
A 2" Dobinsons lift on the Pathfinder R51 typically accommodates tyres up to 265/70R17 or 265/75R16 (approximately 31-32 inches diameter) with minimal to no rubbing on standard wheels with appropriate offset. Tyre fitment depends on several factors including wheel offset, tyre brand (some run larger than others), and whether you've installed aftermarket control arms or diff drops. Some minor trimming of plastic inner guards may be required at full lock and compression depending on your specific wheel and tyre combination. For maximum clearance without rubbing, many Pathfinder owners run 265/70R17 as a safe option that provides noticeable improvement over stock without modification. Always test full lock in both directions and full compression before heading off-road with new tyre sizes.
Dobinsons backs their Nitro Gas shock absorbers and coil springs with comprehensive manufacturer warranty coverage against defects in materials and workmanship. Warranty periods vary by component — shock absorbers typically carry 12-24 month warranty depending on application, while coil springs are covered for manufacturing defects. Warranty coverage requires professional installation, proof of purchase, and use within the product's designed parameters (correct vehicle application, appropriate load ratings, proper maintenance). The warranty does not cover damage from accidents, improper installation, modifications, or use beyond rated capacity. For specific warranty terms and claim procedures, refer to the documentation included with your kit or contact us for detailed warranty information before purchase.
Absolutely — this Dobinsons Nitro Gas kit is specifically engineered to balance off-road capability with on-road comfort for daily driving. The twin-tube nitro gas design with vehicle-specific valving provides a noticeably firmer and more controlled ride than worn factory suspension, but remains compliant enough for comfortable highway cruising and urban commuting. Many Pathfinder R51 owners run this kit as their daily driver, reporting improved handling, reduced body roll in corners, and better stability in crosswinds compared to factory suspension — especially on vehicles with 150,000+ km on original shocks. The key to maintaining good ride quality is selecting spring rates appropriate for your actual constant load — avoid the temptation to over-spring the vehicle if you're not carrying heavy accessories, as this will result in unnecessary harshness.
Perfect upgrade for family touring adventures
Been running this Dobinsons 2-inch lift kit on our R51 for about six months now, including a few trips out to the Flinders and along the coast. The ride quality is noticeably smoother than stock, especially when we're loaded up with the camper trailer and all the family gear. Installation was straightforward and everything fitted properly without any dramas, which says a lot about the quality of Australian engineering.(5)
Solid Upgrade for Daily Work Duties
Been running this Dobinsons 2 inch lift kit on my R51 for about six months now, carting tools and materials to sites every day. The ride quality is noticeably better than stock even when loaded up, and handled a weekend trip down some rough fire trails without any dramas. Installation was straightforward enough and everything lined up properly, which you don't always get with suspension kits.(5)
Solid Kit for Serious Outback Work
Been running this Dobinsons 2-inch lift on my R51 for six months now, covering everything from the Canning Stock Route to Cape York corrugations. The twin-tube shocks handle washouts and ruts brilliantly without that harsh jarring you get from cheaper setups. Ride quality loaded with camping gear and water is streets ahead of the factory suspension, and the coils haven't sagged a millimetre despite constant punishment.(5)
Perfect Upgrade for Our Family Adventures
Fitted this Dobinsons 2-inch lift kit to our R51 Pathfinder before our last trip through the High Country and it's transformed the way the car handles both on and off road. The ride quality is noticeably smoother over corrugations compared to the old setup, and the kids in the back aren't complaining anymore. Really impressed with how well-balanced it feels when we're loaded up with camping gear and the roof-top tent. Worth every cent for a proper Australian-made suspension system.(5)
Perfect upgrade for touring the outback
Just finished installing this Dobinsons 2 inch lift kit on my R51 Pathfinder and couldn't be happier with how it handles now. Took it through the High Country last month with a loaded camper trailer and the ride quality was leagues better than the old setup - no more bottoming out on corrugations. The difference in clearance and stability is immediately noticeable, and the blokes at 4WD Suspension Australia had it delivered within days.(5)
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
