The Dobinsons Nitro Gas 2" Lift Kit is purpose-built for the Nissan Pathfinder R51 (2005-2013) and pairs twin-tube nitro gas shock absorbers with vehicle-specific coil springs for a 2" lift front and rear. NOK multi-lip seals and German Fuchs oil keep the shocks running cooler under load, while increased oil capacity resists fade on long touring runs or when towing. This complete lift kit ships from Australian stock with a manufacturer warranty and fitment support from our team.
Browse all compatible suspension parts for your Nissan Pathfinder R51 using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Nissan | Pathfinder | R51 | 2005-2013 | 4.0L V6 Petrol (VQ40DE) |
| Nissan | Pathfinder | R51 | 2005-2013 | 2.5L 4-Cyl Turbo Diesel (YD25DDTi) |
| Nissan | Pathfinder | R51 | 2010-2013 | 3.0L V6 Turbo Diesel (V9X) |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
Choosing the right rear spring rate depends on what you permanently carry — a heavier constant load needs a firmer rated spring to hold correct ride height, while a lighter setup rides better unladen with a standard rate. Common accessories that shift this decision include bull bars and winches up front, and dual batteries, long-range fuel tanks, drawer systems, caravans or camper trailers out back. Tell our team your typical accessory and touring load and we'll help match the front and rear spring rate before you order.
This is a bolt-in kit for experienced DIY installers with the right tools, though we recommend professional fitment given the coil spring compression and torque specs involved. Wheel alignment is mandatory after fitting — the 2" lift changes camber and caster and running the vehicle without a check will accelerate tyre wear. Allow a 500km bounce-in period for the coil springs and shocks to settle before a final alignment check. For correct front-end geometry at ride height, pair this kit with upgraded control arms.
Dobinsons has been designing and manufacturing 4WD suspension for over 60 years, with valving and spring rates developed and tested on Australian roads and tracks rather than adapted from an overseas market. Their kits are used by tourers, tradespeople and caravan owners who need suspension that holds up to real load, not just showroom driving. You can view the full Dobinsons range for other Pathfinder and 4WD applications.
This kit suits Pathfinder R51 owners running a bull bar and winch, towing a box trailer or small caravan, or fitting drawers and camping gear for weekend touring. Tradespeople carrying tools and equipment daily will notice reduced rear sag and steadier handling. If your accessory load is heavier and variable, also look at airbag suspension to fine-tune load support on top of this kit.
This Dobinsons Nitro Gas 2" Lift Kit is in stock in Australia and ready for fast dispatch, backed by manufacturer warranty and fitment guidance from our team. Browse our full lift kit range to compare options for your Pathfinder.
Yes, this Dobinsons Nitro Gas 2" Lift Kit is designed specifically for the Nissan Pathfinder R51 built between 2005 and 2013, covering the 4.0L V6 petrol, 2.5L turbo diesel and 3.0L V6 turbo diesel variants. The shocks and coil springs are matched to R51 mounting points and spring perches, not a universal fitment. If you're unsure of your exact build date or variant, our team can confirm fitment before you order.
This kit provides a 2" lift front and rear on the Pathfinder R51, achieved through vehicle-specific raised coil springs matched to longer-travel nitro gas shocks. The lift is even across both axles, so ride height and stance stay level once the springs settle. Actual ride height can vary slightly depending on vehicle load and accessory weight already fitted.
Please note that all assembled struts are dispatched at a height based on our experience and the manufacturer’s specifications for the advertised lift. Coil springs and leaf springs are also manufactured according to the advertised height and constant-load rating. Actual vehicle height may vary depending on the vehicle and the weight of fitted accessories. Further adjustment may therefore be required after installation. The installer may use coil spacers or adjust the struts at their discretion to achieve the desired height. We are not responsible for vehicle-specific height variations or any additional adjustments required after installation.
The kit includes 2 front and 2 rear Dobinsons Nitro Gas shock absorbers, 2 front and 2 rear 2" raised coil springs, front and rear bump stops, and the mounting hardware needed for installation. Fitting instructions are included. Control arms are not part of this kit and are sold separately if an upgrade is needed.
Yes, the increased oil capacity and German Fuchs oil in the Nitro Gas shocks are specifically aimed at reducing fade under sustained load, which includes towing. The coil springs are vehicle-specific to support typical Pathfinder touring accessories without excessive sag. For heavier or variable towing loads, ask our team about matching a firmer rear spring rate to your setup.
A 2" lift changes the front control arm angle, which can affect camber and caster at the new ride height. Many R51 owners running this lift pair it with upgraded control arms to correct geometry and reduce wear on CV joints and bushes. It's not compulsory for every setup, but our team can advise based on how you use the vehicle.
Yes, wheel alignment is mandatory after installing this kit. The 2" lift shifts camber and caster from factory settings, and running the vehicle without a proper alignment will cause uneven and accelerated tyre wear. We recommend an alignment check again after the 500km bounce-in period once the springs have settled.
Spring rate selection depends on what you're permanently carrying — bull bar and winch weight up front, and drawers, dual batteries or a caravan out back. Contact our team with your typical accessory load and we'll help match the correct front and rear spring rate for your Pathfinder before dispatch. Getting this right keeps ride height correct both loaded and unladen.
The 2" lift creates additional clearance that typically allows a modest tyre size increase over factory, though exact clearance depends on wheel offset and width. We recommend checking your intended tyre and wheel combination with our team before purchase to confirm rubbing won't occur at full steering lock or suspension compression.
This kit is covered by Dobinsons' manufacturer warranty against defects in materials and workmanship. If an issue arises with the shocks or springs, our team handles the warranty process on your behalf as the Australian supplier. Keep your proof of purchase and installation date for any warranty claim.
Yes, the twin-tube nitro gas shocks are valved to keep an unladen ride compliant for daily use, not just heavy off-road work. Many Pathfinder R51 owners run this kit as their everyday suspension while still getting the benefit of extra clearance and load support for weekend touring. Comfort on sealed roads is retained alongside the added off-road capability.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
