Reviewed by Andrew, 4WD Suspension fitment team
Dobinsons rear coil springs for the Mitsubishi Pajero Sport QE-QF 2015-On are wound in Australia and supplied in multiple rates so the spring matches the load actually carried on the rear of the vehicle. Choose your lift height and load rating below — the genuine Dobinsons part number is shown against every option. Sold as a matched pair at Dobinsons RRP, in stock in Australia with fitment support from our team.
Browse all compatible suspension parts for your Mitsubishi Pajero Sport QE-QF 2015-On using our parts finder.
These springs are the core of a 2 inch or 3 inch lift kit for the Pajero Sport QE-QF 2015-On — pair them with the matching dampers so the ride height and damping work together: Dobinsons front coil springs for the Pajero Sport QE-QF 2015-On; Dobinsons Nitro Gas front shocks for the Pajero Sport QE-QF 2015-On; Dobinsons Nitro Gas rear shocks for the Pajero Sport QE-QF 2015-On; Dobinsons IMS rear shocks for the Pajero Sport QE-QF 2015-On. Every part is load-rated, pair-priced at Dobinsons RRP and dispatched from Australian stock.
Last updated: 10 September 2026
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Mitsubishi | Pajero Sport | QE / QF | 2015 - On | 2.4L Turbo Diesel |
Note: Strut front, coil rear (Triton-based platform with a coil rear).
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
| Lift | Part Number | Constant Load |
|---|---|---|
| Standard Height | C43-099V | No Accessories |
| 1" Lift | C43-097V | No Accessories |
| 2" Lift | C43-203 | No Accessories |
| 2" Lift | C43-045V | 125Kg |
| 2" Lift | C43-165V | 250Kg |
Rear coil springs are a bolt-in job for an experienced DIY installer or any suspension workshop. Support the axle before removing the old springs, and have the vehicle aligned afterwards if the ride height changes noticeably. Allow around 500km for new springs to settle. Springs only — shocks are sold separately.
Dobinsons has been designing and manufacturing 4WD suspension in Australia for decades, with springs wound and dampers valved for local loads, corrugations and touring distances rather than adapted from an overseas market spec. Every part is backed by a Dobinsons manufacturer warranty. View the full Dobinsons range to match the rest of your build.
Mitsubishi Pajero Sport QE-QF 2015-On owners restoring sagged ride height or fitting accessories that add constant weight. Pair with matched Dobinsons dampers valved for the lift height you choose.
| Specification | Detail |
|---|---|
| Brand | Dobinsons |
| Type | Rear coil springs |
| Position | Rear axle |
| Sold as | Pair (both sides) |
| Vehicle | Mitsubishi Pajero Sport QE-QF 2015-On |
| Lift options | 1 inch, 2 inch, Standard height |
| Load ratings | 125 kg, 250 kg |
| Spring rate | Linear rate, Variable rate |
| Part numbers | C43-099V, C43-097V, C43-203, C43-045V, C43-165V |
Load ratings refer to permanent extra weight over the axle. Springs do not change the vehicle's GVM or towing capacity.
Yes — these Dobinsons rear coil springs are made for the Mitsubishi Pajero Sport QE-QF 2015-On and use the factory spring mounts, so no cutting or drilling is required. Strut front, coil rear (Triton-based platform with a coil rear).
Lift depends on the option selected and is shown in the dropdown and the options table. Actual height also depends on your current spring sag and the weight permanently carried, so a spring rated for a heavier load will sit higher on an unladen vehicle and settle once accessories are fitted.
Match the rating to weight that is on the vehicle permanently rather than occasionally. Too soft and the vehicle sags with accessories fitted; too firm and it rides harshly unladen. Our team can confirm the right option against your build before you order.
A matched pair (2 x) of Dobinsons coil springs in the option you select, with the exact part number shown in the dropdown. Shocks, struts and other components are sold separately.
Yes. Choose the 2" lift option on this page and pair it with the matching Dobinsons dampers linked above — springs set the lift height and load rating, and the matched shocks control it. The same approach with 3" options builds a 3 inch lift kit for the Pajero Sport QE-QF 2015-On.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.