Dobinsons Nitro Gas Twin Tube front shock absorbers for the Mitsubishi Triton ML-MN, Triton MQ-MR & Pajero Sport QE-QF — a nitrogen-charged twin tube damper. This is a single-specification damper for this vehicle; the exact Dobinsons part number is shown above. Sold as a matched pair at Dobinsons RRP, in stock in Australia with fitment support from our team.
Browse all compatible suspension parts for your Mitsubishi Triton ML-MN, Triton MQ-MR & Pajero Sport QE-QF using our parts finder.
Building a complete Pajero Sport QE-QF, Triton ML-MN, Triton MQ-MR suspension upgrade or lift kit? Match these dampers with the Dobinsons springs engineered for the same lift heights: Dobinsons front coil springs for the Pajero Sport QE-QF, Triton ML-MN, Triton MQ-MR; Dobinsons rear leaf springs for the Pajero Sport QE-QF, Triton ML-MN, Triton MQ-MR; Dobinsons Nitro Gas rear shocks for the Pajero Sport QE-QF, Triton ML-MN, Triton MQ-MR; Dobinsons IMS rear shocks for the Pajero Sport QE-QF, Triton ML-MN, Triton MQ-MR. Every part is load-rated, pair-priced at Dobinsons RRP and dispatched from Australian stock.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Mitsubishi | Triton | ML / MN | 2006 - 2015 | 2.5L & 3.2L Turbo Diesel, 3.5L V6 Petrol |
| Mitsubishi | Triton | MQ / MR | 2015 - 2024 | 2.4L 4N15 Turbo Diesel |
| Mitsubishi | Pajero Sport | QE / QF | 2015 - On | 2.4L Turbo Diesel |
Note: One Dobinsons part covers all the vehicles listed above — the mounts and valving are identical across these models.
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
| Specification | Part Number | Price (pair) |
|---|---|---|
| Single option | GS43-800 | $430.00 |
Strut-type front dampers are removed with the coil spring as an assembly — a spring compressor and a wheel alignment afterwards are required, so most owners have these fitted by a workshop.
Dobinsons has been designing and manufacturing 4WD suspension in Australia for decades, with springs wound and dampers valved for local loads, corrugations and touring distances rather than adapted from an overseas market spec. Every part is backed by a Dobinsons manufacturer warranty. View the full Dobinsons range to match the rest of your build.
Mitsubishi Triton ML-MN 2006-2015 owners replacing worn factory dampers, matching new dampers to a lift, or upgrading damping for touring and towing. Pair them with the matching rear dampers so both axles behave the same.
New to Triton suspension? Read our guide to common Triton suspension problems and how to fix them.
Yes — these Dobinsons Nitro Gas Twin Tube front dampers suit the Mitsubishi Triton ML-MN, Triton MQ-MR & Pajero Sport QE-QF and replace the factory units directly. The MQ/MR (2015-2024) and MV (2024-on) use different parts.
Nitro Gas is Dobinsons' nitrogen-charged twin tube damper — the value option for daily driving and light touring, valved in Australia for local loads and corrugations.
No — Dobinsons list a single front damper specification for this vehicle, part GS43-800. It is supplied as a matched pair.
A matched pair (2 x) of Dobinsons front shock absorbers. Coil springs and fitting hardware are sold separately.
Yes — on strut-front vehicles the alignment should always be checked after the struts are out.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.