Dobinsons MRA Remote Reservoir rear shock absorbers for the Toyota Prado 150 Series 2010-2024 — a monotube with a remote reservoir and 3-way external damping adjustment. Dobinsons offer more than one specification for this vehicle — the differences (duty rating and constant load) are listed against each option so you can match the damper to how the vehicle is loaded. Sold as a matched pair at Dobinsons RRP, in stock in Australia with fitment support from our team.
Browse all compatible suspension parts for your Toyota Prado 150 Series 2010-2024 using our parts finder.
Building a complete Prado 150 Series 2010-2024 suspension upgrade or lift kit? Match these dampers with the Dobinsons springs engineered for the same lift heights: Dobinsons front coil springs for the Prado 150 Series 2010-2024; Dobinsons rear coil springs for the Prado 150 Series 2010-2024; Dobinsons Nitro Gas front shocks for the Prado 150 Series 2010-2024; Dobinsons Nitro Gas rear shocks for the Prado 150 Series 2010-2024. Every part is load-rated, pair-priced at Dobinsons RRP and dispatched from Australian stock.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Toyota | LandCruiser Prado | 150 Series | 2010 - 2024 | 3.0L & 2.8L Turbo Diesel, 4.0L V6 Petrol |
Note: Kakadu and other KDSS-equipped models must be checked before fitting — KDSS sway bar hydraulics affect suspension choice and setup. The 120 and 250 Series use different parts.
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
| Specification | Part Number | Price (pair) |
|---|---|---|
| Standard | MRA59-A701 | $1158.00 |
| Long Travel | MRA59-A575 | $1158.00 |
Rear dampers are among the simpler suspension jobs — upper and lower fasteners only. Support the axle before removing the old units so the spring or leaf pack does not hang on the brake line. No wheel alignment is required for a rear damper change on its own.
Dobinsons has been designing and manufacturing 4WD suspension in Australia for decades, with springs wound and dampers valved for local loads, corrugations and touring distances rather than adapted from an overseas market spec. Every part is backed by a Dobinsons manufacturer warranty. View the full Dobinsons range to match the rest of your build.
Toyota Prado 150 Series 2010-2024 owners replacing worn factory dampers or upgrading damping for touring and towing. If the rear also sags under load, fix the ride height with springs as well as the damping.
New to Prado suspension? Read our guide to common Prado suspension problems and how to fix them.
Yes — these Dobinsons MRA Remote Reservoir rear dampers suit the Toyota Prado 150 Series 2010-2024 and bolt to the factory rear shock mounts. Kakadu and other KDSS-equipped models must be checked before fitting — KDSS sway bar hydraulics affect suspension choice and setup. The 120 and 250 Series use different parts.
MRA is Dobinsons' monotube remote-reservoir damper with 3-way external damping adjustment, so compression and rebound can be tuned without removing the damper — built for hard touring and towing.
Each option lists the duty rating and constant load Dobinsons specify for it — match that to the weight your vehicle carries permanently. A comfort or medium-load damper suits a mostly unladen vehicle; a heavy duty or big-bore option suits a loaded tray, canopy or towing. Our team can confirm the right one for your build.
A matched pair (2 x) of Dobinsons rear shock absorbers. Springs and fitting hardware are sold separately.
Yes. Dobinsons specify these dampers to work with the factory rear height and with their raised spring options for this vehicle.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.