Tough Dog front coil springs for the Suzuki Jimny XL JB74 5-door (09/2023 onwards), sold per pair. Pick your lift height - 40mm (TDC1107) or 60mm (TDC1109).
Vehicles with a bull bar and winch need the TDUK-084 coil spacer at all heights - add it below. The TDSP-016 ABS relocation kit and TDSP-018 crossmember drop kit are required with every lift.
These are Australian-designed and manufactured springs in micro-alloyed spring steel. Each coil is shot-peened, scragged and load-tested before it leaves the factory, and the hot-forming process is what lets them hold their free height under sustained load.
Pick the rate for the weight the vehicle actually carries, not the weight you'd like it to carry – and count only permanent accessories and loads (bar, winch, drawers, long-range tank) when choosing. A spring that's too firm for an unloaded vehicle rides worse than the factory item; one that's too soft sags the moment you load up.
Fit springs in pairs per axle, and book a wheel alignment after any change in ride height. It's also worth checking brake-line slack and bump-stop condition while the suspension is apart.
Doing the whole vehicle at once? We also stock the matching rear Shock Absorbers and adjustable Rear Panhard Rod for the Suzuki Jimny XL 5 Door 2023-On.
Match them with Tough Dog front shocks.
| Make | Model | Series | Years |
|---|---|---|---|
| Suzuki | Jimny XL | JB74 - 5 Door | 09/2023 - On |
Genuine Tough Dog suspension from an authorised Australian dealer.
New to Jimny suspension? Read our Jimny suspension problems guide.
These suit the following applications: Suzuki Jimny XL JB74 - 5 Door 09/2023 - On. Check your build date and variant against the fitment table on this page – if you're not certain, contact us with your rego or VIN details and we'll confirm fitment before you order.
Tough Dog REQUIRES castor correction on 60mm lifted Jimny XLs - either castor correction bushes (TDUK-063) with the TDSP-018 crossmember drop kit, or radius arms (TDCA-017) with the TDSP-038 drop kit - plus extended brake hoses (TDBH-401 rubber or TDBH-402 braided), the adjustable panhard rods and ABS relocation. Contact us to spec the full 60mm package.
Yes - Tough Dog requires the rear extended rubber brake hose kit (TDBH-404) on 40mm lifts, and the 4x extended hose kit (TDBH-401 rubber or TDBH-402 braided) on 60mm lifts. Contact us to add them to your order.
The listed price covers both sides – always replace left and right together so the axle is evenly damped and sprung. It's a bolt-in job for a competent home mechanic or any workshop; check bushes, mounts and brake-line slack while everything is apart.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
