The Toughdog Rear Adjustable Panhard Rod is a direct-fit correction component for the Suzuki Jimny 2023+ XL 5 Door, built to recentre the rear axle once a lift kit is installed. Its heim-jointed, adjustable-length design lets you fine-tune lateral axle position, removing the off-centre pull and steering wander that come with raised suspension. Pair it with our lift kits for a properly aligned rear end on-road and off. In stock in Australia, backed by manufacturer warranty and fitment support from our team.
Browse all compatible suspension parts for your Rear Adjustable Panhard Rod Suzuki using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Suzuki | Jimny | JB74 XL 5 Door | 2023+ | 1.5L K15B Petrol |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
A panhard rod doesn't change your spring rate, but getting the axle recentred properly matters more once you've matched your rear coil springs to your accessory load. If you're carrying a rear bar, drawer system, water tank or long-range fuel, choose a firmer rear spring first, then fit this panhard rod to correct the resulting axle offset. Common accessories that shift spring rate needs include roof-top tents, dual battery setups, rear bull bars and touring canopies.
This panhard rod is a straightforward bolt-in job for an experienced DIY installer with basic hand tools, though we recommend a qualified 4WD workshop if you're not confident working under the rear axle. Wheel alignment is mandatory after fitting, since adjusting the rod length changes the axle's lateral position under the chassis. These vehicles use a solid front axle on coil springs, located by radius arms and a panhard rod rather than IFS control arms, so geometry correction at lift height comes from caster-correction radius arm bushes or adjustable radius arms plus an adjustable panhard rod.
Toughdog has supplied 4WD suspension components to the Australian market for decades, with components developed and tested locally for Australian roads and tracks. This panhard rod carries a manufacturer warranty and is dispatched from our Australian warehouse, not shipped in on demand. Tourers and tradespeople running lifted Jimnys rely on Toughdog parts to keep rear axle geometry correct under load — view the full Toughdog range for matching shocks and springs.
This panhard rod suits Jimny owners who've already fitted a lift kit and are chasing rear-end steering wander, or anyone doing a full rear suspension rebuild. It's also a sensible addition for tourers running airbag suspension to manage variable rear loads, since correct axle centering keeps handling predictable regardless of what's loaded in the back.
In stock in Australia and ready for fast dispatch, with our team on hand for fitment questions. Browse our full lift kit range to plan the rest of your Jimny suspension upgrade.
New to Jimny suspension? Read our guide to common Jimny suspension problems and how to fix them.
Tough Dog specifies the TDPR-010 adjustable rear panhard rod for the Jimny SN413 (10/1998 - 2018) at 60-80mm lifts, and it also suits later Jimny models - check your model page or contact us.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
