The Tough Dog Rear Foam Cell Shocks for Isuzu MU-X (2014-06/2021) deliver advanced foam cell technology for superior heat dissipation, fade resistance, and consistent damping performance across all terrains. Engineered specifically for the MU-X platform and tested across Australian outback conditions, these premium shock absorbers provide exceptional ride quality whether you're touring, towing, or commuting. Backed by Tough Dog's renowned warranty and available now with fast Australia-wide dispatch from local stock.
Browse all compatible suspension parts for your Rear Foam Cell Shocks -Â Isuzu Mu-X using our parts finder.
| Make | Model | Series | Years | Position |
|---|---|---|---|---|
| Isuzu | MU-X | UC (First Generation) | 2014 - June 2021 | Rear Only |
Not sure if this fits your vehicle or need help identifying your MU-X series? Browse all suspension parts for the Isuzu MU-X or contact our suspension experts for personalized fitment advice. You can also check our FAQ page for common compatibility questions.
When ordering rear shocks, it's critical to pair them with the correct spring rate based on your vehicle's constant load – the weight you carry permanently fitted to your vehicle. Constant loads include bull bars, roof racks with roof-top tents, drawer systems, dual battery setups, long-range fuel tanks, rear bars, spare wheel carriers, and permanently mounted fridges. Occasional loads such as camping gear, passengers, and towing loads should NOT be factored into spring rate selection – selecting overly heavy springs will result in a harsh, uncomfortable ride and potential damage to other suspension components. Always select your spring rate based on realistic constant accessory weight.
Professional installation by a qualified mechanic or experienced DIY installer is recommended for these rear shock absorbers. While shock replacement is straightforward for those with mechanical experience, a full four-wheel alignment is mandatory after installation to ensure correct suspension geometry and prevent premature tyre wear. Allow a 500km break-in period for the shock absorbers to settle and reach optimal performance. For lifted MU-X models or vehicles carrying heavy constant loads, consider pairing these shocks with upgraded control arms to maintain proper suspension geometry and maximize component lifespan.
Tough Dog has earned its reputation as Australia's number one suspension brand through decades of local engineering, rigorous outback testing, and unwavering commitment to quality. Every Tough Dog component is designed to handle the unique demands of Australian terrain – from corrugated outback tracks to beach driving and suburban towing. Trusted by tradespeople who depend on their vehicles daily and touring families crossing the continent, Tough Dog backs their products with comprehensive warranty coverage and nationwide support. Explore the complete Toughdog suspension range to build your ideal 4WD setup.
These Tough Dog Rear Foam Cell Shocks are ideal for Isuzu MU-X owners who demand consistent performance across diverse driving conditions – from daily commuting and highway cruising to weekend touring and serious off-road exploration. They're particularly suited to drivers who regularly tow caravans or camper trailers, carry heavy rear cargo, or have fitted significant rear accessories. For MU-X owners who frequently carry variable loads, consider supplementing these shocks with airbag suspension for on-demand load adjustment and optimal ride height control.
Ready to upgrade your Isuzu MU-X rear suspension? These Tough Dog Foam Cell Shocks are in stock at our Australian warehouse with fast dispatch nationwide. Our suspension specialists are ready to help you select the perfect spring rates and complete your suspension setup. Need a complete solution? Browse our full range of lift kits and suspension packages designed specifically for the Isuzu MU-X platform.
These Tough Dog Foam Cell Shocks (FC41125) are specifically designed to fit Isuzu MU-X models from 2014 through to June 2021 (first generation UC series). This includes all variants within that model range including LS-M, LS-U, LS-T, and 4x2/4x4 configurations. If you have a post-June 2021 MU-X (second generation RJ series), you'll need a different part number – contact our team to confirm the correct fitment for your specific build date and variant.
Foam cell technology uses a special internal foam insert that prevents shock oil aeration and cavitation during heavy use, maintaining consistent damping performance where standard shocks would fade. This design dramatically improves heat dissipation, making foam cell shocks ideal for sustained high-speed corrugated roads, repeated off-road impacts, and heavy towing applications. You'll experience more consistent handling, less fade on long trips, and better control when carrying loads or towing caravans. Foam cell shocks sit between standard gas shocks and premium remote reservoir shocks in performance and price.
This kit includes a pair (2 units) of Tough Dog Foam Cell rear shock absorbers with pre-installed upper and lower mounting bushes, protective shock boots, and all necessary fastening hardware. The shocks come ready to install with comprehensive fitting instructions. Please note that rear springs are sold separately – you'll need to select appropriate coil or leaf spring rates based on your vehicle's constant load requirements and intended use.
Absolutely – these Tough Dog Foam Cell Shocks are specifically engineered to handle the Isuzu MU-X's 3000kg towing capacity. The foam cell technology prevents shock fade during sustained towing, maintaining consistent damping and stability even on long highway trips or corrugated outback tracks. When paired with appropriately rated rear springs for your towing setup, these shocks provide excellent control, reduce sway, and maintain ride height under load. For frequent heavy towing, consider adding airbag suspension for additional load support and adjustability.
These rear shocks can be installed as a standalone upgrade to refresh worn factory shocks and improve performance. However, for optimal results, they should be paired with quality rear springs rated for your vehicle's constant accessory load. If you're running a lift kit or carrying substantial weight, upgraded control arms help maintain correct suspension geometry and reduce bushing wear. Front shocks should also be upgraded if your factory units are worn to maintain balanced suspension performance front-to-rear.
Yes, a full four-wheel alignment is mandatory after installing any suspension components including shock absorbers. While rear shocks don't directly adjust alignment settings, the installation process and any ride height changes can affect suspension geometry and toe settings. Proper alignment ensures even tyre wear, optimal handling characteristics, and prevents premature wear on suspension bushings and components. Most installers include alignment in their fitting service – budget around $150-200 for a quality four-wheel alignment.
Spring rate selection is based solely on your vehicle's constant load – the permanent weight of fitted accessories like bull bars, roof racks, drawer systems, dual batteries, long-range tanks, and rear bars. Add up the weight of all permanently installed accessories (front and rear separately), then select springs rated for that load category. Do NOT factor in passengers, camping gear, or towing weight as these are variable loads. Selecting overly heavy springs for occasional loads will result in a harsh, uncomfortable ride and potential component damage. Our team can help calculate your constant load if you're unsure.
These rear shocks alone don't provide lift height – they're designed to work with your existing ride height or complement a lift kit. If you want to fit larger tyres on your Isuzu MU-X, you'll need a complete lift kit including raised springs (coil or leaf) front and rear, plus potentially upper control arms to maintain suspension geometry. The MU-X can typically accommodate 31-32 inch tyres with a 2-inch lift, though exact fitment depends on tyre width, offset, and whether you're willing to do minor guard trimming. Contact us for specific tyre fitment advice for your setup.
Tough Dog backs these Foam Cell Shocks with a comprehensive Australian warranty covering manufacturing defects and premature failure under normal use conditions. The specific warranty period varies based on application and use, but typically ranges from 12-24 months for shock absorbers. Warranty coverage requires proper installation, regular maintenance, and use within the shock's designed load and application parameters. Keep your purchase receipt and installation records for warranty claims. Contact our team for specific warranty details and registration requirements.
Yes, these Tough Dog Foam Cell Shocks are engineered to provide excellent on-road comfort while maintaining off-road capability – making them perfect for dual-purpose MU-X vehicles used for both daily driving and weekend adventures. The progressive damping characteristics deliver a compliant, comfortable ride on sealed roads and highways, absorbing bumps smoothly without harshness. When you venture off-road, the same shocks provide controlled damping and fade resistance for confident handling on tracks, corrugations, and rough terrain. This versatility makes them ideal for Australian families who tour occasionally but drive their MU-X daily.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
