Tough Dog raised rear coil springs for the Suzuki Jimny JB74 3-door (2019 onwards), sold per pair. Choose 40mm (TDC1003), 60mm (TDC1004) or 80mm (TDC1005) of lift.
The headlight module bracket must be fitted to all lift kits - add it from the options. The 40mm springs can take the coil-insert Air Assist airbag kit.
Tough Dog coils are designed and made in Australia from micro-alloyed spring steel – shot-peened, scragged and load-tested, and hot-formed on precision mandrels so the spring keeps its height and rate after years of heavy loading.
Pick the rate for the weight the vehicle actually carries, not the weight you'd like it to carry – and count only permanent accessories and loads (bar, winch, drawers, long-range tank) when choosing. A spring that's too firm for an unloaded vehicle rides worse than the factory item; one that's too soft sags the moment you load up.
Fit springs in pairs per axle, and book a wheel alignment after any change in ride height. It's also worth checking brake-line slack and bump-stop condition while the suspension is apart.
Doing the whole vehicle at once? We also stock the matching adjustable Rear Panhard Rod and front Shock Absorbers for the Suzuki Jimny JB74 2019-On.
Pair with Tough Dog rear shocks.
| Make | Model | Series | Years |
|---|---|---|---|
| Suzuki | Jimny | JB74 - 3 Door | 2019 - On |
Genuine Tough Dog suspension from an authorised Australian dealer.
New to Jimny suspension? Read our Jimny suspension problems guide.
These suit the following applications: Suzuki Jimny JB74 - 3 Door 2019 - On. Check your build date and variant against the fitment table on this page – if you're not certain, contact us with your rego or VIN details and we'll confirm fitment before you order.
Tough Dog REQUIRES castor correction on 60-80mm lifted Jimnys - either castor correction bushes (TDUK-063) with the TDSP-018 crossmember drop kit, or radius arms (TDCA-017) with the TDSP-038 drop kit - plus extended brake hoses, the adjustable panhard rods, ABS relocation and headlight module bracket. Contact us to spec the full 60-80mm package.
The listed price covers both sides – always replace left and right together so the axle is evenly damped and sprung. It's a bolt-in job for a competent home mechanic or any workshop; check bushes, mounts and brake-line slack while everything is apart.
A moderate suspension lift is generally acceptable in most Australian states, but the allowed total lift and whether certification is needed differ between states and change over time – so always confirm with your state’s transport authority before modifying. Our guide explains how the rules work state by state: are lift kits legal in Australia?
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.