Toughdog Heavy Duty Front Coil Springs are built for the Jeep Grand Cherokee WK2 (2011-2021), replacing sagged OEM coils with a progressive-rate design that restores factory ride height under constant accessory load. Rated for bull bars, winches and roof racks, this front pair holds geometry steady while keeping the unladen ride comfortable on-road. Backed by Toughdog's manufacturer warranty and dispatched from our Australian stock, with our team on hand to confirm fitment via the WK2 parts finder before you order.
Browse all compatible suspension parts for your Front Coil Springs Jeep Grand Cherokee using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Jeep | Grand Cherokee | WK2 Laredo/Limited | 2011-2021 | 3.6L V6 Petrol |
| Jeep | Grand Cherokee | WK2 Overland | 2011-2021 | 3.0L CRD Diesel |
| Jeep | Grand Cherokee | WK2 SRT | 2011-2021 | 6.4L V8 Petrol |
| Jeep | Grand Cherokee | WK2 Trackhawk | 2018-2021 | 6.2L Supercharged V8 |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
Choose your spring rate based on what sits permanently on the front of your WK2 — a steel bull bar, winch and driving lights add real weight before you've packed anything else. Heavier front-end accessory combinations need this heavy duty rate to avoid front sag and restore correct headlight aim and steering geometry. If your WK2 runs a lighter bar or no bar at all, a standard-rate spring may suit better — our team can confirm which rate matches your accessory list.
Fitment is a bolt-in job for an experienced DIY installer with a spring compressor, though we recommend a qualified suspension workshop given the front end holds steering and braking components. Wheel alignment is mandatory after fitting — ride height changes affect camber and toe and this is not covered under warranty if skipped. Allow a 500km bearing-in period before final alignment for the springs to settle to their working height. If you're loading the front end permanently, consider pairing this spring upgrade with control arm upgrades to correct suspension angles at the new ride height.
Toughdog develops and tests its suspension range in Australia, tuning spring rates and damping specifically for local roads, tow loads and accessory setups rather than relying on generic overseas specs. Every Toughdog coil spring is backed by a manufacturer warranty and is used by touring 4WD owners and tradespeople who load their vehicles daily. You can view the full Toughdog range to see matching shocks, leaf springs and control arms for the WK2.
This spring pair suits WK2 owners running a bull bar, winch or roof rack who've noticed the front end sagging below factory height. It's also a solid option for tradespeople carrying front-mounted equipment daily. If your load varies significantly trip to trip, it's worth comparing this fixed-rate spring against airbag suspension, which lets you adjust support on the fly.
In stock in Australia and ready for fast dispatch, with our team on hand to confirm fitment for your WK2 before you buy. Browse our full lift kit range if you're planning a bigger suspension upgrade alongside these springs.
New to Jeep suspension? Read our guide to common Jeep suspension problems and how to fix them.
Yes, these Toughdog front coil springs are engineered specifically for the Jeep Grand Cherokee WK2 built from 2011 to 2021, including Laredo, Limited, Overland, SRT and Trackhawk variants. They bolt directly into the factory front spring seats with no cutting or modification required. If you're unsure which engine or trim you have, use our WK2 parts finder or contact our team with your VIN.
This is a heavy duty replacement spring rather than a large lift kit — its main job is restoring the WK2's factory front ride height once it's sagged under a bull bar, winch or roof rack. Fitted to a laden vehicle it brings the front end back to standard height; on an unladen vehicle you may see a mild increase over a sagged factory spring. If you're chasing a specific lift figure, talk to our team about pairing it with a dedicated lift kit.
You get two Toughdog Heavy Duty Front Coil Springs, matched left and right for the WK2's front axle. The kit includes the corrosion-resistant coated springs and warranty documentation. Rear springs, shock absorbers and control arms are sold separately and can be added to your order if needed.
These front springs are rated for constant front-end accessory loads such as bull bars and winches rather than rear towing weight. For towing, your rear leaf or coil springs and shock absorbers matter more — check our leaf spring and shock absorber ranges to match your GVM and towball weight. Our team can advise a full front and rear setup based on your tow rig.
At the modest height change these springs produce, most WK2 owners don't need control arm upgrades. If you're combining these front springs with a rear lift or larger front lift kit, upgraded control arms help correct caster and reduce driveline vibration at the increased height. Ask our team to review your full setup before ordering.
Yes, wheel alignment is required after fitting these front coil springs. Changing spring height alters camber and toe, and an out-of-alignment WK2 will wear tyres unevenly and can affect steering feel. We recommend aligning after the 500km bearing-in period once the springs have settled to their working height.
Toughdog produces this spring in different rate options to suit varying accessory loads, and this heavy duty pair is intended for WK2s carrying a bull bar, winch or similar constant front weight. If your accessory load is lighter, a standard-rate spring may give a more comfortable unladen ride. Contact our team with your accessory list and we'll confirm the right rate for your vehicle.
Because this spring restores rather than dramatically increases ride height, tyre clearance is largely unchanged from factory. If you're planning larger tyres, you'll likely need a dedicated lift kit for extra guard clearance rather than relying on these heavy duty springs alone. Talk to our team about tyre size limits for your specific WK2 variant.
These Toughdog front coil springs are covered by Toughdog's manufacturer warranty against material and manufacturing defects. Warranty cover requires correct installation and a post-fit wheel alignment, so keep your fitment receipt. Our team can talk you through the warranty terms before you order.
Yes, this spring is designed to keep the WK2 comfortable for daily driving while carrying the weight of a bull bar or winch. The progressive rate is set up to feel firm enough to control accessory load without turning the unladen ride harsh. Owners running a WK2 as a daily driver with permanent front accessories are the main users of this spring pair.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
