The Toughdog Rear Shock Absorbers for Toyota 90/95 Series Prado deliver proven foam cell technology and heavy-duty construction that's built to handle Australia's harshest conditions — from corrugated outback tracks to highway towing with loaded tourers. Engineered to restore or enhance ride height, control body roll, and improve load-carrying capability, these premium shock absorbers are a direct-fit upgrade for your Prado. Backed by Toughdog's Australian warranty, in stock now with fast dispatch nationwide.
Browse all compatible suspension parts for your Rear Shock Absorbers For Toyota 90/95 using our parts finder.
Note: Front shocks, springs, and other suspension components sold separately. See our complete Prado suspension parts range for full system upgrades.
Pair these rear shocks with upgraded coil springs for a complete rear suspension overhaul that transforms your Prado's load capacity and ride comfort.
| Make | Model | Series | Years | Position |
|---|---|---|---|---|
| Toyota | Prado | 90 Series | 1996-2002 | Rear |
| Toyota | Prado | 95 Series | 1996-2002 | Rear |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page for detailed fitment guidance and model-specific advice.
When upgrading rear shocks, consider pairing them with appropriately rated rear coil springs based on your constant accessory load. Common rear accessories that affect spring selection include dual battery systems, long-range fuel tanks, drawer systems, roof racks with rooftop tents, rear bar and spare wheel carriers, water tanks, fridge slide systems, and camping gear storage. For vehicles regularly towing caravans or camper trailers, or carrying trade equipment, medium to heavy-duty spring rates are recommended to maintain correct ride height and prevent rear-end sag. Our suspension experts can help you select the perfect spring and shock combination for your specific load requirements.
Professional installation by a qualified mechanic or experienced DIY enthusiast with appropriate tools and safety equipment is recommended for this shock absorber upgrade. A full four-wheel alignment is mandatory after installation to ensure correct suspension geometry, prevent premature tyre wear, and maintain safe handling characteristics. Allow a 500km break-in period for the foam cell technology to fully bed in and reach optimal damping performance. For vehicles with lifts exceeding 50mm or those used for serious off-road touring, consider pairing these shocks with upgraded control arms and adjustable panhard rods to correct suspension geometry and maximize component lifespan.
Toughdog has earned its reputation as Australia's most trusted 4WD suspension brand through decades of real-world outback testing, continuous engineering refinement, and unwavering commitment to quality manufacturing. Every Toughdog component is designed to withstand the unique challenges of Australian touring — from Cape York's bulldust to the Simpson Desert's relentless corrugations — and is backed by comprehensive warranty coverage and expert technical support. Trusted by tradespeople, grey nomads, and serious 4WD enthusiasts nationwide, Toughdog delivers proven reliability when you're hundreds of kilometres from the nearest workshop — view the full Toughdog suspension range to complete your Prado upgrade.
These Toughdog rear shocks are ideal for Prado 90/95 owners experiencing worn or leaking factory shocks, rear-end sag when loaded, or harsh ride quality on corrugated tracks. They're perfect for touring families hauling camper trailers around Australia, tradespeople carrying constant tool and equipment loads, or daily drivers wanting to restore factory ride comfort and control. If you regularly tow caravans or carry heavy rear loads, consider adding airbag suspension for on-demand load leveling and adjustable spring rates that adapt to changing payload requirements.
These Toughdog rear shock absorbers are in stock now at 4WD Suspension Australia with fast dispatch to all states and territories. Need help choosing the right suspension setup for your Prado? Our experienced suspension specialists are ready to provide expert advice on shock and spring combinations, lift kits, and complete system upgrades — browse our full lift kit range or contact us today for personalized recommendations based on your vehicle's load and intended use.
Yes, these Toughdog rear shock absorbers are specifically engineered for Toyota Prado 90 and 95 Series models manufactured between 1996 and 2002. They are a direct bolt-in replacement for the factory rear shock absorbers and fit all 90/95 Series variants regardless of engine type or trim level. The shocks use the original factory mounting points and require no modifications to install. If you're unsure about your exact model year or have aftermarket suspension modifications already fitted, our team can verify fitment — just contact us with your VIN or build date.
These Toughdog rear shock absorbers are designed primarily to control damping and improve ride quality rather than provide lift — actual ride height is determined by your coil springs. However, if your factory shocks are worn and allowing rear-end sag, installing these new shocks will help restore your Prado to its original ride height by properly controlling spring compression and rebound. For increased ride height, you'll need to pair these shocks with raised coil springs rated for your load requirements. Our suspension experts can recommend the ideal spring and shock combination to achieve your desired lift height while maintaining optimal ride quality.
This package includes two complete Toughdog foam cell rear shock absorbers with factory-matched mounting bushes and hardware required for installation. You'll also receive detailed installation instructions and Toughdog warranty documentation. Please note that front shock absorbers, coil springs, leaf springs, and other suspension components are sold separately. If you're looking to upgrade your entire Prado suspension system, check our complete parts range for the 90/95 Series Prado where you'll find matched shock and spring kits, complete lift kits, and all necessary suspension components.
Absolutely — these Toughdog rear shocks are specifically valved to handle the increased loads associated with towing caravans and camper trailers behind your Prado 90/95 Series. The foam cell technology maintains consistent damping under sustained load, reducing rear-end sway and improving stability during highway towing and corrugated track conditions. For optimal towing performance, pair these shocks with appropriately rated heavy-duty rear coil springs that match your typical towing weight. Many Prado owners also add airbag suspension for adjustable load support that can be fine-tuned based on trailer tongue weight and cargo load.
If you're only replacing worn factory shocks with these Toughdog rear shock absorbers and maintaining standard ride height, control arm upgrades are generally not required for the Prado 90/95 Series. However, if you're also installing lifted coil springs (50mm or higher) or already have a lift kit fitted, upgraded adjustable control arms are highly recommended to correct suspension geometry, maintain proper castor and camber angles, and prevent premature wear on ball joints and bushings. Control arm upgrades become essential for serious off-road use, heavy load carrying, or when you want to maximize articulation and suspension travel on challenging terrain.
Yes, a full four-wheel alignment is mandatory after installing any suspension components including shock absorbers. While rear shocks don't directly adjust alignment angles, the installation process and any changes to ride height can affect your Prado's suspension geometry, toe settings, and camber angles. Proper alignment ensures even tyre wear, optimal handling characteristics, and safe on-road performance. Most reputable suspension installers will automatically include a post-installation alignment as part of their service. The small investment in proper alignment will save you hundreds in premature tyre replacement and ensure your Prado tracks straight and handles predictably.
These Toughdog rear shock absorbers come pre-valved with damping rates specifically engineered for the Prado 90/95 Series platform and typical touring/towing loads. The valving is not adjustable or customizable — it's optimized for the best balance between on-road comfort, load control, and off-road capability for most users. However, you can customize your suspension setup by selecting different coil spring rates (light, medium, or heavy-duty) to match your constant accessory load and typical payload. Our team can help you select the ideal spring rate to pair with these shocks based on your vehicle's accessories, typical loads, and intended use scenarios.
These rear shock absorbers alone will not provide additional clearance for larger tyres — tyre fitment is determined by your total lift height (controlled by springs), guard clearance, and suspension travel limits. If your goal is to fit larger tyres on your Prado 90/95 Series, you'll need to install a complete lift kit with raised coil springs front and rear, which may also require extended shock absorbers with longer travel. Typical Prado 90/95 Series models can accommodate 31-32 inch tyres with a 2-inch lift, or 33-inch tyres with a 3-inch lift and minor guard trimming. Contact our team for specific tyre fitment advice based on your desired tyre size and lift height.
These Toughdog rear shock absorbers are backed by Toughdog's comprehensive Australian manufacturer warranty, providing coverage against defects in materials and workmanship under normal use conditions. Warranty duration and specific terms are detailed in the documentation included with your shocks. Toughdog has an extensive dealer and support network across Australia, making warranty claims and replacement parts readily accessible nationwide. To maintain warranty coverage, shock absorbers must be installed correctly by a qualified technician, and the vehicle must undergo regular servicing as per manufacturer recommendations. Keep your purchase receipt and installation records for warranty validation.
Yes, these Toughdog rear shock absorbers are perfectly suited for daily driving, city commuting, and highway travel while also delivering enhanced capability for touring and off-road adventures. The foam cell damping technology provides a comfortable, controlled ride on sealed roads without the harsh or overly-firm feel associated with some heavy-duty off-road shocks. Many Prado owners choose Toughdog specifically because it offers an excellent balance between daily comfort and weekend capability. Whether you're dropping kids at school during the week or towing a camper across the Nullarbor on weekends, these shocks deliver consistent performance across all driving conditions without compromise.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
