The Airbag Man Air Suspension Helper Kit CR5004 transforms your Toyota Prado 90/95 Series into a versatile load carrier with on-demand air support that works perfectly with your factory coil springs. Engineered for Australian touring conditions, this complete airbag suspension system delivers adjustable load levelling, enhanced stability when towing caravans or campers, and prevents rear-end sag under heavy payload. Backed by over 25 years of Airbag Man expertise, with all components in Australian stock for fast dispatch and full manufacturer warranty support.
| Make | Model | Series | Years | Notes |
|---|---|---|---|---|
| Toyota | Land Cruiser Prado | 90 Series | 1996-2003 | NZ Import models with coil spring rear suspension |
| Toyota | Land Cruiser Prado | 95 Series | 1996-2003 | NZ Import models with coil spring rear suspension |
Browse all compatible suspension parts for your Air Suspension Helper Kit For Coil using our parts finder.
Not sure if this fits your vehicle? Check all suspension parts for the Toyota Prado or contact our suspension experts to confirm compatibility with your specific model.
The beauty of airbag helper kits is their adjustability—inflate to the pressure needed for your current load, then deflate when running empty. Start with 5-10 PSI for unloaded driving, then gradually increase pressure up to 100 PSI as you add weight. Common rear accessories that require air pressure adjustment include bull bars with rear-mounted spare wheels, dual battery systems, long-range fuel tanks, drawer systems, roof-top tents, canopies with toolboxes, and of course caravan or camper trailer towing. For heavy towing applications over 2,000kg, consider pairing with upgraded shock absorbers for optimal control.
This Airbag Man kit is designed for straightforward installation with an approximate fitment time of 120 minutes for experienced DIY mechanics or professional workshops. Additional mounting brackets may be required depending on your specific Prado configuration—check fitment notes before ordering. The kit includes comprehensive step-by-step instructions accessible via QR code on the packaging or through the Airbag Man website. Once installed, start with low pressure and gradually increase while monitoring ride height and vehicle handling. If you're also upgrading other suspension components like suspension bushings or hardware, it's efficient to install everything together during one service.
Airbag Man has been Australia's trusted air suspension specialist for over 25 years, with a proven track record in delivering reliable load support solutions for 4WDs, commercial vehicles, and towing applications. Their products are rigorously tested in real-world Australian conditions—from Outback corrugations to coastal salt exposure—ensuring durability and performance when you need it most. Every kit is backed by comprehensive manufacturer warranty and supported by a national network of fitting specialists. Explore the full Airbag Man range for complete suspension solutions.
This airbag helper kit is perfect for Prado owners who regularly tow caravans, camper trailers, or boat trailers, tradespeople carrying heavy tools and equipment, and touring enthusiasts with loaded roof racks and rear storage systems. If you experience rear-end sag, poor headlight aim when loaded, or compromised handling with weight in the back, this is your solution. Unlike permanent spring upgrades that can create a harsh ride when unloaded, airbag suspension lets you dial in exactly the support you need for every journey.
This Airbag Man Air Suspension Helper Kit CR5004 is in stock at 4WD Suspension Australia with fast dispatch to all states and territories. Our suspension specialists are available to answer fitment questions and help you choose the right air pressure setup for your specific needs. For comprehensive suspension upgrades, browse our full lift kit range and create the perfect setup for your Toyota Prado touring rig.
This Airbag Man CR5004 kit is specifically designed for Toyota Land Cruiser Prado 90 Series and 95 Series NZ Import models manufactured between 1996-2003 that are equipped with factory coil spring rear suspension. It's important to confirm your Prado has coil springs at the rear (not leaf springs) before ordering. If you're unsure about your specific model or need confirmation on compatibility, our team can verify fitment details—just contact us with your VIN or vehicle build date.
Airbag helper kits don't technically increase your vehicle's legal GVM or load rating—they work within your existing weight limits to restore correct ride height and improve handling when carrying heavy loads. When properly inflated, these airbags can support several hundred kilograms of additional rear-end weight, preventing sag and maintaining level vehicle stance. The adjustable pressure range of 5-100 PSI lets you fine-tune support based on your exact load, whether that's a loaded canopy, caravan tongue weight, or touring gear. Always stay within your Prado's manufacturer-specified payload limits.
This complete Airbag Man kit includes a pair of reinforced rubber airbags for the rear axle, vehicle-specific mounting brackets and hardware, nylon air line tubing, push-to-connect fittings, Schrader valve assembly for manual inflation, and all necessary fasteners and U-bolts. The kit also comes with comprehensive step-by-step fitting instructions accessible via QR code. Note that some Prado configurations may require additional mounting brackets, and in-cab air compressor systems are sold separately if you want convenient on-the-go pressure adjustment capability.
Absolutely—this is one of the primary applications for airbag helper kits. When towing a caravan or camper trailer, the tongue weight compresses your rear suspension, causing sag, poor headlight aim, reduced steering control, and accelerated wear on suspension components. By inflating these airbags to the appropriate pressure for your specific tow weight, you restore level ride height, improve stability, reduce body roll, and maintain proper weight distribution. Many caravan towers run 40-70 PSI when hitched up, then deflate to 5-10 PSI when the van is unhitched for comfortable daily driving.
While not mandatory, upgrading to heavy-duty shock absorbers is highly recommended if you regularly carry heavy loads or tow substantial weight. Airbags restore ride height and spring support, but they don't control suspension movement—that's the job of your shocks. If your factory shocks are worn or you're adding significant weight, pairing this airbag kit with quality aftermarket shocks will deliver much better handling, reduced body roll, and improved ride quality both loaded and unloaded. This combination creates a comprehensive rear suspension upgrade ideal for serious touring and towing.
A full four-wheel alignment is not typically required after installing airbag helper kits, as they work alongside your existing coil springs without significantly altering suspension geometry. However, it's good practice to check rear axle alignment and toe settings after any suspension work, especially if you've also replaced other components. If you notice uneven tyre wear or handling changes after installation, have your alignment checked by a professional suspension workshop. Proper tyre pressures and regular rotation remain important for even wear patterns when running airbag-assisted suspension.
Air pressure adjustment is simple and can be done with standard tyre inflation equipment at service stations or with a portable air compressor. The kit includes a Schrader valve (same as your tyres) for easy access to inflate or deflate the airbags. Many users upgrade to an in-cab inflation system with an onboard compressor and dashboard-mounted pressure gauge for ultimate convenience—allowing you to adjust pressure on the fly without leaving the driver's seat. Start with low pressure when unloaded and gradually increase as you add weight, monitoring ride height and handling response.
This airbag helper kit is designed to restore and maintain factory ride height under load—it does not provide suspension lift for fitting larger tyres. If your goal is to run bigger tyres, you'll need a dedicated suspension lift kit that raises the entire vehicle, increasing clearance between tyres and guards/chassis. Airbags are best suited for load support, towing applications, and preventing rear sag rather than gaining ground clearance. However, they work brilliantly alongside a lift kit setup, helping maintain level stance when your lifted Prado is carrying touring gear or towing.
Airbag Man products are backed by comprehensive manufacturer warranty coverage, reflecting the brand's confidence in their quality and durability after 25+ years in the industry. Specific warranty terms cover manufacturing defects and component failures under normal use conditions. Warranty does not typically cover damage from incorrect installation, accident damage, or wear from exceeding pressure specifications. Keep your proof of purchase and installation records, and ensure the kit is fitted according to manufacturer instructions to maintain full warranty coverage. Contact us for specific warranty duration and claim procedures.
Yes, one of the major advantages of airbag helper systems is their versatility for both loaded and unloaded driving. When you're not carrying heavy cargo or towing, simply deflate the airbags to 5-10 PSI (or even zero in some cases) and your Prado will ride on its factory coil springs with near-stock comfort characteristics. When you load up for a trip or hitch the caravan, inflate to the required pressure for that load. This on-demand adjustability means you don't sacrifice daily driving comfort for load-carrying capability—you get the best of both worlds.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.