The Airbag Man CR5044HP is a high pressure helper kit purpose-built for the Jeep Wrangler TJ (1996-2007) coil spring suspension. It uses genuine Firestone airbags wrapped in a protective high-pressure sleeve, doubling the usable operating pressure of a standard airbag kit to support rooftop tents, winches and camper trailers without sag. The airbags fit inside your existing coil springs and adjust on demand to suit the load you're carrying. Backed by a lifetime Firestone warranty, dispatched from Australian stock with fitment support from our team.
Browse all compatible suspension parts for your Helper Kit Jeep Wrangler Tj 96-07 using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Jeep | Wrangler | TJ | 1996-2007 | 2.5L & 4.0L petrol, 2.8L CRD diesel (coil spring rear) |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
This helper kit works with your existing coil springs rather than replacing them, so the key decision is how much constant accessory load you're carrying and how much extra air pressure you'll typically run. Wranglers fitted with rooftop tents, rear drawers, long-range fuel, winches or towing a camper trailer generally sit closer to the high end of the pressure range, while lighter touring setups only need a small top-up. If your TJ carries a heavier constant load, talk to our team about whether a heavier-rate rear coil spring alongside this kit is a better long-term match.
Fitment involves drilling for secure mounting points and takes around 120 minutes for a mechanically experienced DIY installer or a workshop familiar with the TJ's coil spring rear end. We recommend having the fitment checked by a qualified technician, and while the airbags themselves don't alter suspension geometry, any accompanying spring or shock changes should be followed by a wheel alignment. Allow a short settling period after fitment and re-check air pressure once the vehicle has covered some kilometres under load. Consider pairing this kit with upgraded control arms if you're also running a raised suspension setup.
Airbag Man has focused on air suspension products for Australian conditions for more than 25 years, using genuine Firestone airbags rather than generic alternatives. Every airbag in this kit carries a lifetime manufacturer's warranty, reflecting the durability expected from a component that's fitted underneath a working 4WD. Tourers, tradespeople and caravan owners across the country rely on this range — view the full Airbag Man range to see other helper kits and full air suspension options.
This kit suits Wrangler TJ owners who load up regularly — think rooftop tents, camper trailer towing, tray or canopy work loads, or a permanent bar and winch setup that's dragging the rear down. It's a practical option for anyone who wants adjustable load support without committing to a full airbag suspension system or a heavier permanent spring rate. It also suits owners who switch between an unloaded weekend drive and a fully loaded touring trip.
This CR5044HP kit is dispatched from Australian stock with a lifetime Firestone warranty on the airbags, and our team can help confirm fitment before you order. Browse all suspension parts for the Jeep Wrangler using our parts finder to see compatible shocks, springs and control arms for your TJ.
New to Jeep suspension? Read our guide to common Jeep suspension problems and how to fix them.
Yes, the CR5044HP is built specifically for the Jeep Wrangler TJ built between 1996 and 2007, fitting the factory coil spring rear suspension. It suits petrol 2.5L and 4.0L models as well as the later 2.8L CRD diesel, since all TJ variants share the same coil spring rear architecture. If you're unsure about a modified or non-standard TJ, our fitment team can confirm compatibility before you order.
This is a helper kit, not a fixed lift kit — it doesn't add a set number of inches to your ride height. Instead, the Firestone airbags support the rear coil springs and restore your factory ride height when loaded, with air pressure adjustable on the road to suit the weight you're carrying. For a fixed lift measured in inches, you'd pair this kit with raised coil springs from our coil springs range instead or alongside it.
The kit includes two Firestone high pressure airbags, each fitted with a protective high-pressure sleeve, plus mounting brackets, nylon air lines, push-in fittings, a T-piece and a single inflation valve. Installation instructions are supplied via QR code and the Airbag Man website. Coil springs and shock absorbers are not included, as the airbags are designed to work with your existing suspension.
Yes, it's commonly fitted to Wrangler TJs that tow camper trailers or carry a constant tow ball load. By supporting the rear coil springs, it helps prevent rear-end squat, keeping weight distribution more even across all four corners for better steering and braking feel while towing. Pressure can be increased before a tow and dropped again for unloaded driving.
Not necessarily — this helper kit doesn't change your ride height or suspension geometry the way a lift kit does, so control arms aren't a mandatory pairing. If you're also running raised coil springs or a lift on your TJ alongside this kit, upgraded control arms can help correct driveline and steering angles at that height. Speak to our team if you're combining this kit with other suspension changes.
Fitting the airbags alone doesn't change your Wrangler's suspension geometry, so a wheel alignment isn't strictly required for this kit on its own. If you're installing it alongside new coil springs, shocks or a lift, we recommend a wheel alignment as part of that broader suspension change. Our team can advise based on exactly what else you're fitting.
This kit works with your existing rear coil springs rather than replacing them, so spring rate itself isn't selected as part of this purchase. What you can adjust is air pressure in the bags, which effectively lets you fine-tune support for light touring through to heavier towing loads. If your accessory load is consistently heavy, ask our team about pairing this kit with a heavier-rate rear coil spring for a more permanent solution.
Because this helper kit doesn't raise your Wrangler's ride height on its own, it won't create extra clearance for larger tyres by itself. Tyre clearance on a TJ is governed by your existing suspension height, wheel offset and any guard trimming already done. If you're planning a tyre upgrade, look at our coil spring options for a genuine lift alongside this airbag kit.
The Firestone airbags in this kit are covered by a lifetime manufacturer's warranty, one of the longer warranty terms available in the suspension category. This reflects the airbag construction and the added protection of the high-pressure sleeve fitted over each unit. Keep your proof of purchase from 4WD Suspension for any warranty claim.
Yes, plenty of Wrangler TJ owners run this kit day to day, dropping air pressure for an unloaded commute and adding pressure when the vehicle is loaded up for a trip or weekend of towing. Because it works with your factory coil springs rather than replacing them, unloaded ride quality isn't compromised when the bags are run at lower pressure. It's a practical option for a TJ that does both daily duties and periodic heavy-load trips.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
