Dobinsons Nitro Gas Twin Tube front shock absorbers for the Isuzu D-Max 07/2020-On — a nitrogen-charged twin tube damper. Dobinsons offer more than one specification for this vehicle — the differences are listed against each option so you can match the damper to your lift height and how the vehicle is loaded. Sold as a matched pair at Dobinsons RRP, in stock in Australia with fitment support from our team.
Browse all compatible suspension parts for your Isuzu D-Max 07/2020-On using our parts finder.
Building a complete D-Max suspension upgrade or lift kit? Match these dampers with the Dobinsons springs engineered for the same lift heights: Dobinsons front coil springs for the D-Max; Dobinsons rear leaf springs for the D-Max; Dobinsons Nitro Gas rear shocks for the D-Max; Dobinsons IMS rear shocks for the D-Max. Every part is load-rated, pair-priced at Dobinsons RRP and dispatched from Australian stock.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Isuzu | D-Max | TFS40 | 07/2020 - On | 3.0L Turbo Diesel |
Note: The 2012-06/2020 D-Max (TFS85) uses different parts.
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
| Specification | Part Number | Price (pair) |
|---|---|---|
| 0"-2" Lift | GS21-470 | $430.00 |
| 3" Lift | GS21-472 | $430.00 |
Strut-type front dampers are removed with the coil spring as an assembly — a spring compressor and a wheel alignment afterwards are required, so most owners have these fitted by a workshop.
Dobinsons has been designing and manufacturing 4WD suspension in Australia for decades, with springs wound and dampers valved for local loads, corrugations and touring distances rather than adapted from an overseas market spec. Every part is backed by a Dobinsons manufacturer warranty. View the full Dobinsons range to match the rest of your build.
Isuzu D-Max 07/2020-On owners replacing worn factory dampers, matching new dampers to a lift, or upgrading damping for touring and towing. Pair them with the matching rear dampers so both axles behave the same.
New to D-Max suspension? Read our guide to common D-Max suspension problems and how to fix them.
Yes — these Dobinsons Nitro Gas Twin Tube front dampers suit the Isuzu D-Max 07/2020-On and replace the factory units directly. The 2012-06/2020 D-Max (TFS85) uses different parts.
Nitro Gas is Dobinsons' nitrogen-charged twin tube damper — the value option for daily driving and light touring, valved in Australia for local loads and corrugations.
Each option lists what Dobinsons specify for it — match the damper to your lift height and the weight the vehicle carries. Our team can confirm the right one for your build.
A matched pair (2 x) of Dobinsons front shock absorbers. Coil springs and fitting hardware are sold separately.
Yes — on strut-front vehicles the alignment should always be checked after the struts are out.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.