The Dobinsons MRA Adjustable 2" Lift Kit suits the Toyota Fortuner GUN156R and GUN166R (2015-Current, 2.8L diesel) and delivers a 2" lift with 3-way externally adjustable monotube remote-reservoir shocks front and rear, running a 50mm front and 60mm rear bore. Tuned coil springs are matched to your constant accessory load, from stock-weight touring to bullbar and drawer setups. Independent compression and rebound adjustment lets you dial in a firmer setting for corrugations or a softer setting for the highway. In stock in Australia with manufacturer warranty and fitment support from our team.
Browse all compatible suspension parts for your Toyota Fortuner using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Toyota | Fortuner | GUN156R / GUN166R | 2015-Current | 2.8L diesel (1GD-FTV) |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page. You can also browse all suspension parts for the Toyota Fortuner using our parts finder.
Choose your spring rate based on constant accessory load only — the weight permanently fitted to the vehicle, not occasional camping gear or passengers. Common items that add to constant load include a steel bullbar, winch, roof rack, rear drawers, dual battery tray, long-range fuel tank and rear bar with spare wheel. An overly stiff spring for your actual load will ride harsh and can accelerate wear on bushes and shocks, so match the rating to what's genuinely bolted on.
Fitment should be carried out by a qualified suspension installer to get torque specs and initial damper adjustment correct. A four-wheel alignment is required after installation to restore factory geometry and protect tyre wear. Allow around 500km for springs to settle and shock seals to bed in before locking in your final damping setting. On a Fortuner running this lift, we recommend checking your control arms for correct geometry under articulation, particularly if you're also carrying constant accessory weight.
Dobinsons has been designing 4WD suspension in Australia for over 60 years and builds its MRA range around remote-reservoir shock technology used in competitive off-road racing. Every kit comes backed by a manufacturer warranty and is supported by our team for spring rate selection and fitment questions specific to your Fortuner. View the full Dobinsons suspension range for matching steering dampers, bushings and control arms.
This kit suits Fortuner owners who want adjustable damping across daily commuting, highway towing and weekend touring rather than a fixed-rate setup. It's a good fit for tradespeople carrying tools and gear, and for tourers running a bullbar, drawers or a camper trailer. If you tow regularly and need more rear support on demand, pair this kit with airbag suspension to add load capacity without stiffening the unladen ride.
This Dobinsons MRA kit is in stock at our Australian warehouse with fast dispatch nationwide. Our suspension specialists can help confirm spring rates and fitment for your Fortuner — browse our full lift kit range or get in touch before you order.
Yes, this Dobinsons MRA kit is built for the Toyota Fortuner GUN156R and GUN166R, 2015 to current, fitted with the 2.8L diesel engine. It covers all variants of these series. If you're unsure of your exact model code, check your compliance plate or use our parts finder for the Fortuner, or contact our team with your rego or VIN.
This kit provides a 2" lift front and rear on the Fortuner using the supplied coil springs and matched shock valving. That's enough to clear moderately larger tyres and improve approach angle without pushing the vehicle outside factory-friendly geometry. Actual ride height also depends on your fitted accessory weight and selected spring rate.
Please note that all assembled struts are dispatched at a height based on our experience and the manufacturer’s specifications for the advertised lift. Coil springs and leaf springs are also manufactured according to the advertised height and constant-load rating. Actual vehicle height may vary depending on the vehicle and the weight of fitted accessories. Further adjustment may therefore be required after installation. The installer may use coil spacers or adjust the struts at their discretion to achieve the desired height. We are not responsible for vehicle-specific height variations or any additional adjustments required after installation.
You get 2 front and 2 rear Dobinsons MRA Adjustable remote-reservoir shocks, plus 2 front and 2 rear tuned coil springs, mounting hardware and fitting instructions. Each shock has 3-way external adjustment for compression and rebound. Control arms and steering dampers are not included and are sold separately if needed.
Yes, once the spring rate is matched to your constant accessory load, the kit improves rear stability under tow. The 3-way adjustable shocks let you firm up damping when towing and back off for unladen driving. For heavier or frequent towing, we recommend pairing this kit with airbag suspension for added on-demand rear support.
It's not compulsory at a 2" lift, but upgraded control arms help maintain correct CV joint and steering geometry, especially if you're also carrying constant accessory weight or running larger tyres. Our team can advise whether your specific Fortuner setup would benefit from a control arm upgrade based on your intended use.
Yes, a four-wheel alignment is mandatory after installing this kit. It restores factory geometry at the new ride height and prevents uneven or accelerated tyre wear. We recommend booking the alignment with the same installer who fits the kit, straight after fitment.
Yes, Dobinsons offers this kit with multiple front and rear coil spring rates so you can match the load to what's actually and permanently fitted to your Fortuner, such as a bullbar, winch or drawers. Selecting a rate heavier than your constant load will make the ride harsher than it needs to be, so speak to our team before ordering.
A 2" lift on the Fortuner typically creates clearance for a moderate tyre size increase over stock, though exact clearance depends on wheel offset and width. We recommend confirming your intended tyre and wheel combination with our team before purchase to avoid rubbing at full articulation.
This kit is backed by Dobinsons' manufacturer warranty, covering manufacturing defects in the shocks and springs. Warranty terms are handled through us as your Australian supplier, and our team can talk you through the specific coverage period and claim process at the time of purchase.
Yes, the 3-way external adjustment on the MRA shocks lets you set a softer damping profile for daily commuting and highway use, then firm it up for off-road or loaded driving without swapping parts. Many Fortuner owners run this kit as their only suspension setup for both city and touring use.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
