The Dobinsons Nitro Gas Lift Kit suits the Mitsubishi Triton ML-MN (2006-2015) and delivers a 1" lift front and rear using raised coil springs and raised leaf springs matched to twin-tube nitrogen gas shock absorbers. The kit lifts ground clearance for larger tyres and improves load support over factory coil springs without a harsh ride. Polyurethane bushes and U-bolts are included for a direct bolt-in fit. In stock in Australia with Dobinsons warranty and fitment support from our team.
Browse all compatible suspension parts for your Mitsubishi Triton Ml-Mn using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Mitsubishi | Triton | ML | 2006-2009 | 2.5L 4D56 diesel |
| Mitsubishi | Triton | MN | 2009-2015 | 2.5L 4D56 diesel, 3.2L 4M41 diesel |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
This kit is set up for standard to moderate constant accessory loads. If you run a steel bull bar, winch, dual battery tray, or regularly tow with a loaded canopy, tool boxes or long-range fuel tank, contact our team before ordering so we can confirm the spring rate matches your fitted accessories. Front accessories that affect spring choice include bull bars and winches; rear accessories include canopies, tool boxes, water tanks and drawer systems.
Fitment requires basic mechanical tools and is suited to an experienced DIY installer or a workshop familiar with leaf spring and coil spring suspension. Wheel alignment is mandatory after installation to reset camber, caster and toe at the new ride height. Allow a 500km bedding-in period for the springs and bushes to settle before fine-tuning alignment. Consider pairing this kit with control arm upgrades to correct front suspension geometry and CV joint angles at the lifted height.
Dobinsons is an Australian-established suspension manufacturer that designs and tests its Nitro Gas shocks and spring kits locally for Australian conditions. This kit is backed by a Dobinsons manufacturer warranty and is used by tourers and tradespeople who need a direct bolt-in upgrade over factory suspension. You can view the full Dobinsons range for other Triton-compatible components.
This kit suits Triton ML-MN owners who tow, carry tool boxes and equipment for work, or fit touring gear such as roof racks and canopies. If your constant rear load varies significantly, such as with a caravan or camper trailer, ask us about airbag suspension to add load-levelling on top of this kit.
This Dobinsons Nitro Gas Lift Kit is dispatched from Australian stock with fitment support from our team. Browse our full lift kit range or contact us to confirm this kit against your Triton's build plate before ordering.
New to Triton suspension? Read our guide to common Triton suspension problems and how to fix them.
Yes, this Dobinsons Nitro Gas Lift Kit is built for the Mitsubishi Triton ML (2006-2009) and MN (2009-2015) dual-cab and single-cab models with 2.5L 4D56 or 3.2L 4M41 diesel engines. It is a direct bolt-in kit using the factory mounting points, U-bolts and hardware supplied in the kit. If you're unsure of your exact build, check your compliance plate or contact our team before ordering.
This kit provides a 1" lift at the front using raised coil springs and a 1" lift at the rear using raised leaf springs. The lift is measured at static ride height once the vehicle settles after the 500km bedding-in period. Actual clearance can vary slightly depending on accessory weight fitted to the vehicle.
Please note that all assembled struts are dispatched at a height based on our experience and the manufacturer’s specifications for the advertised lift. Coil springs and leaf springs are also manufactured according to the advertised height and constant-load rating. Actual vehicle height may vary depending on the vehicle and the weight of fitted accessories. Further adjustment may therefore be required after installation. The installer may use coil spacers or adjust the struts at their discretion to achieve the desired height. We are not responsible for vehicle-specific height variations or any additional adjustments required after installation.
The kit includes 2 front and 2 rear Dobinsons Nitro Gas twin-tube shock absorbers, 2 raised front coil springs, 2 raised rear leaf springs, polyurethane bushes for the leaf spring eyes and shackles, and heavy-duty U-bolts. Fitting instructions and the Dobinsons warranty card are also included. Upper and lower control arms are not included and are sold separately if required.
The rear leaf springs and Nitro Gas shocks in this kit are designed to support constant accessory loads such as tool boxes, canopies and touring gear, which helps with towball download control. For heavier or variable towing loads, such as a loaded caravan, we recommend asking our team about a heavier-rate leaf spring option or adding airbag suspension for load levelling.
Control arms are not included in this kit but are worth considering once the Triton is raised, as factory front control arms can run at a less favourable angle at a 1" lift. Upgraded control arms can correct this angle and improve CV joint life. Our team can advise whether it's necessary for your specific driving conditions.
Yes, wheel alignment is mandatory after installing this kit. Raising the vehicle changes camber, caster and toe settings, and correct alignment protects tyre wear and steering feel. We recommend booking alignment after the 500km bedding-in period once the new springs and bushes have settled.
This listing is for the standard-rate 1" front and rear kit suited to moderate accessory loads. If you're running a bull bar, winch, dual battery tray, or heavier rear accessories on a constant basis, contact our team to discuss whether a different spring rate from the Dobinsons range better matches your setup.
A 1" lift front and rear typically creates modest extra clearance for a larger tyre diameter compared to factory suspension, but exact clearance depends on wheel offset, tyre width and whether guard trimming is needed. We recommend checking your intended tyre size with our team before purchase to confirm clearance on your Triton.
This kit is covered by the Dobinsons manufacturer warranty against defects in materials and workmanship. Warranty terms and claim conditions are outlined on the warranty card included with the kit. Our team can also assist with warranty queries after installation.
Yes, this kit is designed to retain a comfortable on-road ride while adding load support, using twin-tube Nitro Gas shocks rather than a stiffer off-road-only valving. Many Triton owners run this kit as their daily setup while also using it for touring and towing on weekends. Wheel alignment after fitting helps maintain normal steering feel and tyre wear for daily use.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
