Tough Dog raised front coil springs for the Suzuki Jimny SN413 (10/1998 - 2018), sold per pair. The same spring sits differently on the lighter 2005-on VVT engine, so select by your build date and target lift - each option lists both.
These are Australian-designed and manufactured springs in micro-alloyed spring steel. Each coil is shot-peened, scragged and load-tested before it leaves the factory, and the hot-forming process is what lets them hold their free height under sustained load.
Pick the rate for the weight the vehicle actually carries, not the weight you'd like it to carry – and count only permanent accessories and loads (bar, winch, drawers, long-range tank) when choosing. A spring that's too firm for an unloaded vehicle rides worse than the factory item; one that's too soft sags the moment you load up.
Fit springs in pairs per axle, and book a wheel alignment after any change in ride height. It's also worth checking brake-line slack and bump-stop condition while the suspension is apart.
Doing the whole vehicle at once? We also stock the matching adjustable Front Panhard Rod and rear Shock Absorbers for the Suzuki Jimny 1998-2018.
Fit them with Tough Dog front shocks. Lifts of 60-80mm need the adjustable panhard rods and longer shocks - see the FAQ.
| Make | Model | Series | Years |
|---|---|---|---|
| Suzuki | Jimny | SN413 (JB33, JB43, JB48) | 10/1998 - 2018 |
Genuine Tough Dog suspension from an authorised Australian dealer.
New to Jimny suspension? Read our Jimny suspension problems guide.
The 2005-on VVT engine is lighter, so the same Tough Dog spring gives less lift on the earlier 1.3L. Each option shows the lift for both eras - pick the row matching your build date and target height.
Tough Dog specifies the longer FC31001/FC31006 shocks, front and rear adjustable panhard rods, castor correction and the rear brake hose kit for 60 and 80mm lifts - contact us for the castor and brake hose parts. The ABS relocation bracket must be fitted to all lift kits - add it from the options above.
These suit the following applications: Suzuki Jimny SN413 (JB33, JB43, JB48) 10/1998 - 2018. Check your build date and variant against the fitment table on this page – if you're not certain, contact us with your rego or VIN details and we'll confirm fitment before you order.
The listed price covers both sides – always replace left and right together so the axle is evenly damped and sprung. It's a bolt-in job for a competent home mechanic or any workshop; check bushes, mounts and brake-line slack while everything is apart.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
