The Dobinsons 2" Nitro Gas Lift Kit is purpose-built for the NewGen Volkswagen Amarok (2023-on), pairing nitrogen-charged front struts and rear shocks with matched coil springs and progressive-rate leaf springs for a genuine 2" lift front and rear. Nitro gas damping resists heat fade on corrugated tracks, while polyurethane bushes and heavy-duty U-bolts complete this lift kit upgrade. Stocked in Australia with a manufacturer warranty and fitment support from our team, it suits tourers and tray-back tradies carrying constant accessory loads.
Browse all compatible suspension parts for your 2" Nitro Gas Lift Kit Newgen Amarok using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Volkswagen | Amarok | NewGen | 2023-on | 2.0L bi-turbo diesel & 3.0L V6 TDI |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
Choose your rear spring rate based on what stays fitted to the tray or canopy day to day — a tourer running drawers, a fridge and a long-range tank needs a firmer constant-load spring than a ute used unladen most of the week. Front spring selection should account for a steel bullbar and winch, which add weight ahead of the front axle and can settle a standard-rate coil. Talk to our team before ordering if you're running a heavy accessory combination so we can confirm the right spring for your setup.
This kit is best fitted by a qualified suspension workshop or an experienced DIY installer with a hoist and spring compressor, given the leaf spring and U-bolt work involved. Wheel alignment is mandatory after fitting to reset caster, camber and toe at the new ride height. Allow a 500km bedding-in period for the nitro gas shocks and springs to settle before final alignment checks. For NewGen Amarok owners lifting for larger tyres, pairing this kit with upgraded control arms corrects geometry that the factory arms can't achieve at 2" of lift.
Dobinsons has been designing and manufacturing 4WD suspension in Australia for decades, with struts and shocks tuned specifically for local road and track conditions rather than adapted from overseas kits. Every Nitro Gas kit is backed by a manufacturer warranty, and the brand is a regular fitment choice for touring vehicles and trade utes carrying genuine daily loads. You can view the full Dobinsons range to compare this kit against their other Amarok options.
This kit suits NewGen Amarok owners who tow, tour or carry trade equipment and need more ground clearance and load capacity than the factory suspension provides. It's a solid fit for tradespeople running canopies and toolboxes, and for touring owners fitting drawers, fridges and rooftop tents. If your accessory load varies significantly trip to trip, also look at airbag suspension to fine-tune rear support on the go.
This Dobinsons 2" Nitro Gas Lift Kit is dispatched from Australian stock with fitment support from our team. Browse our full lift kit range or get in touch if you need help matching spring rates to your NewGen Amarok's load.
Yes, the D50NG-SNGA kit is designed specifically for the NewGen Volkswagen Amarok built from 2023 onward, covering both the 2.0L bi-turbo diesel and 3.0L V6 TDI variants. It is not designed for the previous-generation Amarok (2010-2022), which uses a different chassis and requires a separate Dobinsons kit. If you're unsure which generation you have, our team can confirm fitment from your VIN or build plate.
This kit delivers a 2" lift at the front using Dobinsons Nitro Gas struts with matched coil springs, and a 2" lift at the rear from the progressive-rate leaf springs and rear shocks. That's a genuine, even lift front and rear rather than a nose-up or nose-down stance. The lift is measured at the axle once the springs have settled after the bedding-in period.
The kit includes 2 x Nitro Gas front struts, 2 x Nitro Gas rear shocks, 2 x front coil springs, 2 x progressive-rate rear leaf springs, polyurethane bushes and heavy-duty U-bolts for the rear leaf pack. All mounting hardware for a standard installation is supplied, along with fitting instructions and Dobinsons warranty documentation. Upper control arms are not included and are sold separately if required.
Yes, the progressive-rate rear leaf springs are built to support constant accessory loads, which makes this kit a suitable base for towing setups on the NewGen Amarok. For heavier tow ball weights or frequent full-load towing, talk to our team about matching the rear spring rate to your typical loaded weight. Pairing the kit with a load-specific spring selection helps keep the rear from sagging under a loaded tow ball.
At 2" of lift, factory control arms on the NewGen Amarok can run into altered caster and camber angles that affect tyre wear and steering feel. Upgraded control arms correct this geometry and are worth fitting alongside this kit, particularly if you're also running larger tyres. They're not compulsory for the lift to function, but they improve long-term component wear at this ride height.
Yes, wheel alignment is mandatory after installing this kit. Raising the vehicle 2" changes caster, camber and toe, and driving on a misaligned front end will wear tyres unevenly and affect steering feel. We recommend an alignment straight after fitting and a follow-up check after the 500km bedding-in period.
Dobinsons offers this kit with rear leaf springs suited to different constant accessory loads, so the right choice depends on what stays fitted to your Amarok — canopy, drawers, water tank or tow bar weight. Contact our suspension specialists before ordering with details of your accessory setup so we can confirm the correct spring rate for your combination. Getting the spring rate right avoids a sagging rear or an overly firm unladen ride.
A 2" lift front and rear typically creates clearance for a moderate increase in tyre diameter over the factory-fitted tyre on the NewGen Amarok, though the exact size depends on your wheel offset and whether you're running flares. We recommend checking your intended tyre and wheel combination with our team before purchase to confirm clearance at full steering lock and suspension travel. Pairing the lift with correctly set-up control arms also helps maintain clearance through the guards.
This kit is covered by the Dobinsons manufacturer warranty on the Nitro Gas struts, shocks and springs. Warranty terms are handled through 4WD Suspension as your Australian supplier, and we can talk you through the specific conditions at the time of purchase. Keep your invoice as proof of purchase for any warranty claim.
Yes, the Nitro Gas struts and shocks are valved to keep the ride comfortable unladen for everyday driving, not just under load. Many NewGen Amarok owners run this kit as their daily setup while still getting the load capacity and clearance benefits when towing or carrying gear. If your Amarok runs empty most of the week, mention this when selecting spring rates so we can recommend the right rear spring for a comfortable daily ride.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
