The Dobinsons Nitro Gas 2" Lift Kit is a complete 4WD lift kit built specifically for the Toyota FJ Cruiser (2011-2016), pairing twin-tube nitrogen-charged shocks with 2" raised coil springs front and rear. The larger shock bore and Japanese NOK seals cope with corrugations and payload without the oil breaking down on long touring runs. Raised springs lift the FJ Cruiser 2" at each corner, opening clearance for larger tyres while keeping factory-like on-road manners. Dispatched from Australian stock with full manufacturer warranty and fitment support from our team.
Browse all compatible suspension parts for your 2" Nitro Gas Lift Kit Toyota Fj Cruiser using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Toyota | FJ Cruiser | GSJ15R | 2011-2016 | 4.0L V6 Petrol (1GR-FE) |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
Choose your spring rate based on the constant accessory load carried on your FJ Cruiser, not just occasional payload. Front-end additions like a steel bull bar and winch, and rear-end gear such as long-range fuel tanks, drawers, fridges or a caravan tow ball load, all add constant weight that the standard-rate spring wasn't designed for. Tell us your typical fitted accessories and we'll help match front and rear spring rates so the 2" lift height is maintained under load, not lost.
Fitting this kit involves compressing and swapping coil springs and shocks at all four corners, a job suited to an experienced DIY fitter with a spring compressor or a workshop with a hoist. Wheel alignment is mandatory once the kit is installed, as the raised ride height changes camber and caster from factory settings. Allow a 500km break-in period for the Nitro Gas shocks to settle before fine-tuning tyre pressures for touring. If your FJ Cruiser runs larger tyres or a heavier bar setup, pairing this kit with upgraded control arms helps correct front-end geometry at the new ride height.
Dobinsons has built 4WD suspension in Australia for decades, testing shocks and springs on local roads and tracks before they reach the shelf. This Nitro Gas kit is backed by a manufacturer warranty and is fitted regularly by workshops we support with technical advice. Tourers and tradespeople running FJ Cruisers choose Dobinsons for the vehicle-specific valving rather than a generic off-the-shelf setup — you can view the full Dobinsons range for other FJ Cruiser upgrades.
This kit suits FJ Cruiser owners fitting a bull bar, winch and roof rack for touring, and those wanting genuine 2" clearance for larger tyres without sacrificing on-road manners. It's also a solid base for tradespeople carrying tools and gear daily. If your rear load varies significantly — for example towing on weekends only — ask us about airbag suspension as a load-levelling add-on to this kit.
In stock and dispatched from our Australian warehouse, with our team on hand to confirm fitment before you order. Browse our full lift kit range for other Toyota and 4WD applications.
New to Prado suspension? Read our guide to common Prado suspension problems and how to fix them.
Yes, this Dobinsons Nitro Gas kit is built for the Toyota FJ Cruiser GSJ15R sold in Australia from 2011 to 2016. It's designed around the factory IFS front and coil-sprung rear axle of this specific model. If you're unsure of your build date or series, send us your VIN or rego and our team will confirm fitment before you order.
This kit delivers a 2" lift at both the front and rear of the FJ Cruiser, achieved through raised coil springs matched to Nitro Gas shocks of the correct length. The 2" figure is measured at ride height once the vehicle has settled after the 500km break-in period. Actual clearance gained can vary slightly depending on your accessory load.
Please note that all assembled struts are dispatched at a height based on our experience and the manufacturer’s specifications for the advertised lift. Coil springs and leaf springs are also manufactured according to the advertised height and constant-load rating. Actual vehicle height may vary depending on the vehicle and the weight of fitted accessories. Further adjustment may therefore be required after installation. The installer may use coil spacers or adjust the struts at their discretion to achieve the desired height. We are not responsible for vehicle-specific height variations or any additional adjustments required after installation.
The kit includes 2 front and 2 rear Dobinsons Nitro Gas shock absorbers, 2 front and 2 rear 2" raised coil springs, spring seats and mounting hardware. Fitting instructions are included in the box. Upper control arms are not included and are sold separately if your setup needs them.
Yes, the Nitro Gas shocks and vehicle-specific coil rates improve load control when towing, particularly with a loaded tow ball weight on the rear axle. For FJ Cruisers towing regularly, we recommend telling us your typical tow ball load so we can confirm the right rear spring rate keeps the 2" lift under that constant weight.
A 2" lift on the FJ Cruiser's IFS front end changes control arm angles and can reduce upper arm clearance at full droop. Many owners run this kit without issue, but if you're also fitting larger tyres or notice reduced front travel, upgraded control arms correct the geometry. Our team can advise based on your tyre size and accessory load.
Yes, wheel alignment is mandatory after installing this kit. The raised ride height alters front camber and caster from factory specification, and correct alignment protects tyre wear and steering feel. We recommend booking an alignment immediately after fitment, then rechecking after the 500km break-in period.
Yes, Dobinsons offers this kit with spring rate options to suit different constant accessory loads front and rear. If you're running a bull bar and winch up front, or drawers, a fridge and long-range fuel up back, tell us the fitted weight and we'll match the spring rate so your FJ Cruiser sits level at the intended 2" height.
The 2" lift from this kit generally clears a modest tyre size increase over standard on the FJ Cruiser, though exact clearance depends on wheel offset and width. We recommend confirming your intended tyre size with our team before ordering, as some combinations may need minor trimming or upgraded control arms for full travel.
This kit is covered by Dobinsons' manufacturer warranty, backed by our support here in Australia. If a shock or spring shows a manufacturing fault within the warranty period, we handle the claim directly with Dobinsons on your behalf. Keep your purchase invoice as proof of purchase for any warranty claim.
Yes, the Nitro Gas twin-tube shocks in this kit are tuned to retain comfortable on-road manners for daily use, not just off-road performance. Many FJ Cruiser owners run this kit as their only suspension setup for commuting, weekend touring and occasional towing. The vehicle-specific valving is what keeps ride quality close to factory on sealed roads.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
