Browse all compatible suspension parts for your Mitsubishi Triton Mq Mr Ml Mn using our parts finder.
]]>| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Mitsubishi | Triton | ML | 2006-2009 | 4D56 |
| Mitsubishi | Triton | MN | 2009-2015 | 4D56 |
| Mitsubishi | Triton | MQ | 2015-2018 | 4N15 |
| Mitsubishi | Triton | MR | 2018-ON | 4N15 |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
Choosing the right rear leaf spring rate depends on the constant weight you carry, not just occasional loads. Tell us what accessories are permanently fitted so we can match a spring rate that keeps the rear sitting level rather than sagging.
Common accessories that affect spring selection include a steel rear bar, dual battery tray, rear drawer system, water tank, canopy or tray back, and a caravan or camper trailer tow ball weight.
Fitting this kit involves replacing the front coil springs, rear leaf spring assemblies and all four shock absorbers, which is best carried out by an experienced 4WD fitter or a competent DIY installer with a workshop hoist. Wheel alignment is mandatory once the kit is fitted, as ride height and castor angle both change. Allow a 500km bedding-in period for the springs and adjustable dampers to settle before fine-tuning the reservoir adjusters. Many owners pair this kit with control arm upgrades to correct front-end geometry and CV joint angles at the new ride height.
Dobinsons has been manufacturing 4WD suspension in Australia and exporting worldwide for decades, with local testing on Australian roads and tracks informing spring and valving choices. Every MRA shock and spring in this kit is backed by Dobinsons' manufacturer warranty, and our team can talk you through spring rate and damping adjustment before you buy. Tourers, tradespeople and remote-area travellers running a Triton commonly choose this kit for its adjustability, so browse the full Dobinsons suspension range to compare options.
This kit suits Triton owners who tour with a loaded canopy or camper trailer, tradespeople carrying tools and equipment daily, and anyone wanting adjustable damping to suit changing loads. If your load varies significantly trip to trip, also look at airbag suspension to add load-levelling on top of this kit's raised springs.
Ready to fit this kit to your Triton? Our team is based in Australia, stock is on hand for fast dispatch, and we're available to confirm fitment before you order. Browse our full lift kit range or check all suspension parts for the Mitsubishi Triton using our parts finder.
New to Triton suspension? Read our guide to common Triton suspension problems and how to fix them.
Yes, the Dobinsons MRA Adjustable kit (SKU DMAMMR50N) is designed specifically for the ML (2006-2009), MN (2009-2015), MQ (2015-2018) and MR (2018-ON) Triton models. Front and rear components are matched to each chassis, so confirm your build date and series before ordering. If you're unsure which series you have, our team can confirm fitment from your compliance plate or VIN.
This kit provides a 2" lift at both the front and rear of the Triton. Lift is achieved through raised front coil springs and raised rear leaf spring assemblies, working together with the MRA shocks to set the new ride height. Actual lift can vary slightly depending on the spring rate selected and any accessories already fitted to your vehicle.
Please note that all assembled struts are dispatched at a height based on our experience and the manufacturer’s specifications for the advertised lift. Coil springs and leaf springs are also manufactured according to the advertised height and constant-load rating. Actual vehicle height may vary depending on the vehicle and the weight of fitted accessories. Further adjustment may therefore be required after installation. The installer may use coil spacers or adjust the struts at their discretion to achieve the desired height. We are not responsible for vehicle-specific height variations or any additional adjustments required after installation.
The kit includes 2 front and 2 rear Dobinsons MRA adjustable monotube remote-reservoir shock absorbers, 2 raised front coil springs, 2 raised rear leaf spring assemblies, a rear U-bolt kit, and all mounting bushes and hardware. Upper control arms are not included and are available separately if needed for your alignment range. Full fitting instructions and the Dobinsons warranty card are supplied with every kit.
Yes, this kit is a common choice for Triton owners towing camper trailers or caravans, as the rear leaf springs can be matched to a higher load rating to suit your constant tow ball weight. The 3-way adjustable shocks let you firm up the rebound and compression settings when towing and back off for unladen daily driving. Tell us your typical tow ball weight and we can help confirm the right spring rate.
Upper control arm upgrades are not compulsory with a 2" lift but are recommended to correct front camber and castor angles and to reduce CV joint strain at the new ride height. Many Triton owners pair this kit with upgraded control arms to extend the available alignment range. Our team can advise whether your specific Triton series needs this upgrade based on your intended use.
Yes, wheel alignment is mandatory after installing this kit. Ride height, camber and castor all change once the raised springs and shocks are fitted, and correct alignment protects tyre wear and steering feel. We recommend booking an alignment immediately after fitment and again after the 500km bedding-in period.
Yes, Dobinsons offers this kit with different rear leaf spring rate options to suit varying constant loads such as a canopy, dual battery tray or tow ball weight. Selecting the correct rate keeps the rear of the Triton sitting level rather than sagging under your typical load. Contact our team with details of your fitted accessories and we'll confirm the appropriate spring rate for your order.
A 2" lift on the Triton generally provides enough clearance for a moderately larger tyre than factory, though exact clearance depends on wheel offset, width and whether flares are fitted. We recommend checking your intended tyre size against our fitment notes or speaking with our team before purchasing tyres. Combining this kit with correct wheel offset avoids rubbing on the guards or chassis rails.
This kit is covered by Dobinsons' manufacturer warranty on both the MRA shock absorbers and the spring components. Warranty terms cover manufacturing defects under normal use conditions, and our team can provide the specific warranty period and claims process at the time of purchase. Keep your proof of purchase and fitment date for any warranty claim.
Yes, the MRA shocks' external 3-way adjustment lets you set a softer damping profile for comfortable daily driving and firm it up for touring or towing when needed. The raised coil and leaf springs are engineered to maintain a factory-like ride quality at the higher ride height rather than a harsh, over-sprung feel. Many Triton owners run this kit as their everyday setup and adjust the reservoirs before a trip.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
