The Dobinsons Monotube Adjustable Lift Kit for the Mitsubishi Triton ML-MN (2006-2015) delivers a 2" to 3" front lift and a 2" rear lift using large-bore monotube shocks with external adjustment for compression and rebound damping. Vehicle-specific raised coil springs and leaf springs are matched to your accessory load, from a stock bullbar and winch through to touring gear. This complete lift kit replaces the entire spring and shock package front and rear, with polyurethane bushes fitted throughout for reduced wear. Backed by Dobinsons' manufacturer warranty, this kit is in stock now with fast Australia-wide dispatch and fitment support from our team.
Browse all compatible suspension parts for your Monotube Adjustable Lift Kit Mitsubishi using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Mitsubishi | Triton | ML | 2006-2009 | 2.5L Turbo Diesel (4D56) |
| Mitsubishi | Triton | MN | 2009-2015 | 2.5L Turbo Diesel (4D56) |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
Lift height compliance: Suspension lifts of this size may exceed your state's allowable limit without engineering certification. Check your state's light vehicle modification rules (VSB14/NCOP) before fitting.
Choose your spring rate based on the constant accessory weight sitting on the vehicle, not just occasional payload. Front rate should account for a steel bullbar and winch; rear rate should account for a canopy, drawer system, water tank or dual battery setup. Common accessories affecting selection include bullbars, winches, canopies, tray bodies, long-range fuel tanks and rooftop tents — tell our team what's fitted and we'll match the correct spring.
This kit is best fitted by a qualified suspension installer or an experienced DIY mechanic with a hoist and spring compressor. Wheel alignment is mandatory after fitting to correct camber, caster and toe at the new ride height. Allow a 500km settling period before final alignment and torque check, as leaf springs and poly bushes take a small set. If you're running larger tyres or altered steering geometry, pair this kit with upgraded control arm upgrades to restore correct front-end angles.
Dobinsons has built suspension components in Australia for decades, with spring rates and shock tunes developed for local vehicle weights and road conditions. Every kit carries a manufacturer warranty and is tested against real Triton fitment data, not generic estimates. Tradespeople and tourers running Dobinsons gear rely on the brand for consistent parts availability — view the full Dobinsons range for matching components.
This kit suits Triton owners running a canopy and tools for work, or a camper trailer and long-range tank for touring, who need lift and load capacity together. If you're carrying variable loads — camper one trip, empty tray the next — talk to us about pairing this kit with airbag suspension for adjustable rear support.
This Dobinsons Monotube Adjustable Lift Kit is in stock in Australia and dispatches fast from our warehouse. Our team can confirm spring rate selection for your exact Triton setup before you order — browse our full lift kit range or get in touch for fitment advice.
Setting up a Triton? Read our guide to common Triton suspension problems and fixes.
Yes, this Dobinsons Monotube Adjustable Lift Kit is built specifically for the Mitsubishi Triton ML (2006-2009) and MN (2009-2015). Both share the same suspension platform, so the coil springs, leaf springs and shock lengths carry across the range. If you're fitting to a GLX-R, GLS or Exceed variant with factory suspension, this kit will suit. Contact our team with your build date if you're unsure which series applies.
This kit provides a 2" to 3" front lift and a 2" rear lift, depending on the coil spring rate selected for your accessory load. The exact front height depends on how much weight sits over the front axle, such as a bullbar and winch. Rear lift is set by the leaf spring pack fitted. Our team can confirm expected ride height for your specific Triton setup.
Please note that all assembled struts are dispatched at a height based on our experience and the manufacturer’s specifications for the advertised lift. Coil springs and leaf springs are also manufactured according to the advertised height and constant-load rating. Actual vehicle height may vary depending on the vehicle and the weight of fitted accessories. Further adjustment may therefore be required after installation. The installer may use coil spacers or adjust the struts at their discretion to achieve the desired height. We are not responsible for vehicle-specific height variations or any additional adjustments required after installation.
The kit includes 2 Dobinsons Monotube Adjustable front shocks, 2 Monotube Adjustable rear shocks, 2 raised front coil springs, 2 raised rear leaf spring assemblies, polyurethane shock bushes, U-bolts and leaf spring mounting hardware. Upper control arms and steering components are sold separately. Full fitting instructions and the Dobinsons warranty card are included in the box.
Yes, the rear leaf spring assemblies are available in constant load rates to suit towing and canopy work, and the monotube rear shocks are adjustable to firm up damping under load. Select a rear spring rate that matches your tow ball weight and any canopy or drawer system already fitted. For variable towing loads, ask about pairing this kit with airbag suspension for extra adjustability.
At a 2" to 3" lift, factory control arms on the ML-MN Triton will work but geometry improves with an upgrade, particularly caster and CV angle at full droop. We recommend upgraded control arms if you're running the kit at the taller end of the range or adding larger tyres. Our team can advise whether your specific combination needs this upgrade.
Yes, wheel alignment is mandatory after installing this kit. The new ride height changes camber, caster and toe settings, and correct alignment protects tyre wear and steering feel. We recommend an alignment straight after fitting and a follow-up check after a 500km settling period once springs and bushes have taken their set.
Yes, Dobinsons offers multiple front coil and rear leaf spring rates for the ML-MN Triton to suit different constant accessory loads. Tell us what's fitted — bullbar, winch, canopy, dual battery, long-range tank — and we'll match the correct rate. Choosing the right rate keeps the vehicle sitting level front to rear rather than relying on lift height alone.
A 2" to 3" lift on the ML-MN Triton typically clears a modest increase in tyre diameter over factory, though exact clearance depends on wheel offset and width. We recommend confirming your intended tyre size with our team before ordering, as rubbing points can vary between cab-chassis and dual-cab tray setups. Upgraded control arms can also help with clearance at full steering lock.
This kit is covered by Dobinsons' manufacturer warranty against manufacturing defects in materials and workmanship. 4WD Suspension also provides fitment support if you have questions before or after installation. Keep your proof of purchase and follow the recommended alignment and break-in steps to keep the warranty valid.
Yes, the monotube adjustable shocks let you set damping firmer for a loaded tray or softer for unladen daily driving. Many ML-MN Triton owners run this kit as a daily driver that also tows and tours on weekends. Ride comfort depends partly on the spring rate chosen, so select a rate matched to your typical load rather than the heaviest occasional one.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
