The Dobinsons MRA Adjustable 40mm lift kit for the all-new Toyota Hilux N90 (AN2, December 2025 onwards) brings race-bred, fully adjustable Monotube Remote-reservoir Adjustable (MRA) shock technology to the latest Hilux. Each shock offers 20-stage low-speed compression, 10-stage high-speed compression and 15-stage rebound adjustment, plus front ride-height adjustment, and is fully rebuildable for life. The complete kit includes front coils, raised rear leaf springs, U-bolts and a polyurethane bush kit. Add Dobinsons or Blackhawk upper control arms from the dropdown — strongly recommended at 40mm+ of lift.
Browse all compatible suspension parts with our Hilux parts finder.
| Make | Model | Series | Years | Configuration |
|---|---|---|---|---|
| Toyota | Hilux | N90 (AN2 platform) | Dec 2025 - current | 4x4 Ute |
Springs should match your vehicle's constant load only - front options cover 0-40kg, 40-60kg and 80-100kg of load-bearing accessories (bar, winch), and rear options cover 0-175kg, constant 300-350kg, constant 580kg, or parabolic springs for up to 60kg. Towing and occasional loads do not count as constant load. Over-springing causes poor flex, reduced travel and a rough ride. Tell us your setup and we will match the correct spring rates before dispatch.
Upper control arms are strongly recommended to attain good wheel alignment at anything above 40mm of lift. All lift heights are estimates - actual height varies with vehicle spec and accessories. A wheel alignment is required after fitting.
Approximately 40mm (estimated) front and rear, with front ride-height adjustment built into the MRA struts for fine tuning. Actual height varies with vehicle spec and fitted accessories. Please note that all assembled struts are dispatched at a height based on our experience and the manufacturer's specifications for the advertised lift. Coil springs and leaf springs are also manufactured according to the advertised height and constant-load rating. Actual vehicle height may vary depending on the vehicle and the weight of fitted accessories. Further adjustment may therefore be required after installation. The installer may use coil spacers or adjust the struts at their discretion to achieve the desired height. We are not responsible for vehicle-specific height variations or any additional adjustments required after installation.
Upper control arms are strongly recommended at anything above 40mm of lift to attain good wheel alignment and keep ball joints in their designed range. See our separate Dobinsons UCA kits and Blackhawk UCA kits for the Hilux N90.
Match springs to your constant load only: front options suit 0-40kg, 40-60kg or 80-100kg of permanently fitted accessories; rear options suit 0-175kg, constant 300-350kg, constant 580kg, or parabolic (up to 60kg) loads. Towing does not count as constant load. Contact us with your setup and we will confirm the correct rates before dispatch.
MRA shocks are Dobinsons' top-tier 3-way adjustable monotube remote-reservoir design: 20-stage low-speed compression, 10-stage high-speed compression and 15-stage rebound adjustment let you tune the ride for terrain and load, and the shocks are fully rebuildable for life.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
