The Dobinsons Nitro Gas Lift Kit for the Mitsubishi Triton MQ-MR (2015-2023) delivers a 1" front and rear lift through twin-tube nitro gas shock absorbers, raised coil springs and heavy-duty leaf springs designed in Australia. German Fuchs oil and Japanese NOK seals inside each shock help control heat on corrugated tracks while the heavy-duty leaf springs add load-carrying capacity for touring gear. Backed by Dobinsons' 60-year manufacturing heritage and a comprehensive warranty, this kit dispatches from Australian stock with fitment support for your Triton MQ-MR.
Browse all compatible suspension parts for your Mitsubishi Triton Mq-Mr using our parts finder.
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Mitsubishi | Triton | MQ | 2015-2019 | 2.4L 4N15 turbo-diesel |
| Mitsubishi | Triton | MR | 2019-2023 | 2.4L 4N15 turbo-diesel |
Not sure if this fits your vehicle? Contact our suspension experts or check our FAQ page.
Choose your spring rate based on what stays fitted to the Triton day to day, not just what you carry occasionally. A tray-back with a steel canopy, dual battery tray, water tank and tool boxes carries a different constant load than a stock ute with a bull bar and winch. Talk to our team about matching the rear leaf spring and front coil rate to your typical accessory load so the ride sits level and controlled both empty and loaded.
This kit is best fitted by an experienced 4WD suspension installer or a competent DIY mechanic with a hoist and spring compressor. Wheel alignment is mandatory after fitting to correct camber, caster and toe at the new ride height. Allow a 500km bed-in period for the leaf springs and shocks to settle before final alignment adjustments. Pairing the kit with upgraded control arms helps restore correct front geometry and driveline angles on lifted MQ-MR Tritons.
Dobinsons has manufactured suspension components for 60 years, with nitro gas shocks and leaf springs designed and built for Australian conditions. The brand is used by tourers, tradespeople and fleet operators who need a lift kit that holds up to daily loading and long-distance corrugated roads. Every kit carries a comprehensive manufacturer warranty — view the full Dobinsons range for other Triton-compatible components.
This kit suits Triton MQ-MR owners who need a modest 1" lift for clearance and load support — tradespeople running canopies and tool boxes, and tourers fitting camper trailers or rooftop tents. If your accessory load varies trip to trip, also look at airbag suspension to fine-tune rear support on the fly.
This kit is in stock in Australia and dispatches fast, with our team on hand to confirm fitment for your MQ-MR before you order. Browse our full lift kit range to compare options for your Triton.
New to Triton suspension? Read our guide to common Triton suspension problems and how to fix them.
Yes, this Dobinsons Nitro Gas Lift Kit is built specifically for the Mitsubishi Triton MQ-MR sold in Australia from 2015 to 2023, covering both the MQ and MR series. It uses vehicle-specific coil springs, leaf springs and shock absorbers rather than universal parts. If you're unsure which series your Triton is, check your compliance plate or contact our team with your VIN and we'll confirm fitment before you order.
This kit provides a 1" lift at both the front and rear of the Triton MQ-MR. The lift comes from raised coil springs at the front and heavy-duty leaf springs at the rear, working together with the nitro gas shocks. This is a modest lift aimed at improved clearance and load support rather than a large body lift.
Please note that all assembled struts are dispatched at a height based on our experience and the manufacturer’s specifications for the advertised lift. Coil springs and leaf springs are also manufactured according to the advertised height and constant-load rating. Actual vehicle height may vary depending on the vehicle and the weight of fitted accessories. Further adjustment may therefore be required after installation. The installer may use coil spacers or adjust the struts at their discretion to achieve the desired height. We are not responsible for vehicle-specific height variations or any additional adjustments required after installation.
The kit includes 2 front and 2 rear Dobinsons Nitro Gas twin-tube shock absorbers, 2 raised front coil springs, 2 heavy-duty rear leaf springs, mounting bushes and the U-bolts and hardware needed for leaf spring installation. Fitting instructions are included. Upper control arms are not included and are sold separately if required.
The heavy-duty rear leaf springs are designed to add load-carrying capacity, which helps support tow ball weight and rear-heavy accessories like canopies and tool boxes. For heavier constant towing loads, talk to our team about rear leaf spring options or pairing this kit with airbag suspension for adjustable extra support.
A 1" lift on the Triton MQ-MR is usually within range of the factory control arms, but upgraded control arms can help correct front geometry and CV joint angles for a smoother ride and reduced wear at the new ride height. Whether you need them depends on your driving style and how the vehicle is loaded. Our team can advise based on your specific setup.
Yes, a full wheel alignment is mandatory after fitting this lift kit. Ride height changes affect camber, caster and toe, and correct alignment protects tyre wear and steering feel. We recommend booking the alignment straight after installation and again after the 500km bed-in period.
Dobinsons offers the Triton MQ-MR leaf springs in different load ratings to suit varying accessory loads such as canopies, bull bars and dual battery trays. The right rate depends on what stays fitted to your Triton day to day. Contact our team with a rundown of your regular gear and we'll help you match the spring rate.
A 1" lift generally provides a small amount of extra clearance, which can help fit a modestly larger tyre depending on your wheel offset and guard trimming. Actual tyre clearance varies with wheel width and offset, so it's worth checking your intended tyre size with our team before you order the kit.
This kit is backed by Dobinsons' manufacturer warranty, covering the nitro gas shock absorbers, coil springs, leaf springs and supplied hardware against manufacturing defects. Dobinsons has produced suspension components in Australia for 60 years. Contact our team if you need the specific warranty terms in writing before purchase.
Yes, the raised coil springs and nitro gas shocks are designed to maintain a comfortable on-road ride while still handling load and rough surfaces. Many Triton MQ-MR owners run this kit as their daily commuter as well as for weekend touring and towing. The 500km bed-in period lets the springs and shocks settle for their most consistent daily-driving feel.
Help other 4WDSuspension users shop smarter by writing reviews for products you have purchased.
Add your favourites to cart
Log into or create your Afterpay account, with instant approval decision
Your purchase will be split into 4 payments, payable every 2 weeks
All you need to apply is to have a debit or credit card, to be over 18 years of age, and to be a resident of country offering Afterpay
Late fees and additional eligibility criteria apply. The first payment may be due at the time of purchase
For complete terms visit afterpay.com/terms
